I'd be afraid of getting my nuggets trapped in the confluence zone.
this post was submitted on 09 Jun 2024
179 points (98.4% liked)
micromobility - Ebikes, scooters, longboards: Whatever floats your goat, this is micromobility
2321 readers
36 users here now
Ebikes, bicycles, scooters, skateboards, longboards, eboards, motorcycles, skates, unicycles: Whatever floats your goat, this is all things micromobility!
"Transportation using lightweight vehicles such as bicycles or scooters, especially electric ones that may be borrowed as part of a self-service rental program in which people rent vehicles for short-term use within a town or city.
micromobility is seen as a potential solution to moving people more efficiently around cities"
Feel free to also check out
It's a little sad that we need to actually say this, but:
Don't be an asshole or you will be permanently banned.
Respectful debate is totally OK, criticizing a product is fine, but being verbally abusive will not be tolerated.
Focus on discussing the idea, not attacking the person.
founded 1 year ago
MODERATORS
๐ต Help! My ball have dropped into the confluence zone! ๐ต
๐ถ Highway tooo the CONFLUENCE ZOOOONE ๐ถ
A wild ZZ Top appears!
The ball-scissors...
Thought the same, sitting on this things looks about as risky as teabagging the moving parts in an elliptical machine.
Just tuck them into your inguinal canals when you go for a ride.
My god, man!
They've had test subjects already. That contingency must have already been compensated for or it would never have made it to market.
That being said, the visuals are horrifying.
Still, I'd like to give it a try. I'm done having kids, regardless.
Kids is one thing but I'm envisioning a balls version of the stick-in-the-spokes meme, with you writhing in agony in the road until an SUV comes along and puts you out of your misery.
Might just sensually juggle them instead of chewing them like a Sami native.
That might be an interesting ride. Maybe they'll release the "XS" model next year.
I can't really tell from the visuals but it looks like they don't really get that close together. The two sides seem like they say hello to each other, but they don't really get that close. So presumably but there's quite some gap in the mechanism.
True poetry
Hooray. I've been looking to add a few more points of maintenance and failure to my bike.
I think these things are pretty well made, they don't appear to be cheap Chinese tat, but I'd want to confirm that before I was prepared to even consider buying one.
Nope! I recognize a pair of testicular pliers when I see them. Your application is rejected.
Each cheek gets its own seat.
Seems pretty wild, IDK about this one but I guess we'll see how people like it.
Anything that makes cycling more comfortable for me people is always a win in my books.
I've always felt that if a saddle needs the rider to wear padded short, it's not the right saddle.
I recently switched to a Selle SMP saddle, and suddenly my hand pains went away, and I'm more comfortable without padded shorts.
But the issue for me, isn't so much pain from sitting, but chaffing/rubbing by ordinary underwear and bottoms. Cycling shorts are just designed to exclude seams where you don't want them.
I wonder if this saddle addresses clothing rub.
Side note, it bothers me immensely that many of the riders in the demo video are rocking side to side. Their bike isn't nearly set up right if they are forced to do that. Like the saddle is too high.
You may want to look into some chamois cream
I use it when wearing padded shorts, but I really shouldn't need to wear padded shorts. I may need to get different underwear, so the fabric doesn't bunch up or crease, but that's about it.
When I was riding with a Brooks C15, I pretty much had to wear padded shorts or it felt like I was sitting on a wooden plank. I endured it for thousands of KM until I realized that there are so many better options out there.
load more comments
(6 replies)
This is why I have a recumbent. It's a lawn chair with wheels.
They sure are comfortable.
I totally want one, but they're expensive AF. I think I'm gonna go with a Cane Creek Thudbuster seatpost after reading some reviews, the LT looks like it could soak up a good amount of bumps for a seatpost.
you aren't supposed to sit on the saddle over bumps. you lift up your butt and use your knees/hips to as the suspension.
load more comments
(1 replies)
load more comments
(1 replies)
Kansas roads have me empathically wincing with tailbone pain whenever I see one out and around
Do you prefer the praying mantis bars, or the under-seat steering? I hear you on the price, I've been eying the Hase Pino Tandem for a while now. The driver is upright in the back, while another rider can pedal along recumbent in front. It's a marvel. Test rode it 2-3 times and I just can't bring myself to fork over that much dough unless I have to (which is why most of the recumbent riders in my life did it). Also knowing I'll have ongoing maintenance costs the whole time I have it and some of those parts may not be off the shelf.
The guys who ride the recumbent trikes have it made though, they can pull up their wheeled lawnchairs in a circle and reach behind them into the attached cooler for some snacks.
load more comments
(1 replies)
This looks similar to the Hobson bike seat I've been using for the last couple of decades. I recommend the Hobson - it's very comfortable. Maybe this one will be great too.
~~Makes it easier to fart while you ride.~~
This doesn't look gimmicky at all but like the future of bicycle saddles.
A properly fitted bike saddle should not make you sore during normal use.
A properly fitted bike saddle should not make you sore during normal use.
Most folks who ride a bike ride a crappy soft foam saddle that makes your butt sore after more than 10m of use.
Good saddles cost over $50+, most folks are buying entire bikes that cost about $100-200... on which the saddle costs $5-10.
I doubt this mechanical seat will be cheaper than an entry level , but properly built normal saddle.
And frankly the fit matters the most. Most shops will give your seat a quick review/adjust if you go in and buy anything.
As a person whos 100kg i wouldnt agree
There are many folks at 100kg or more riding comfortably. Having properly fitted equipment is critical.
I recommend stopping by a bike shop, they'll often review your fit for free or very cheap the difference is massive.
load more comments
(2 replies)
would be interested in comparison to properly fitted regular seat but I'm not super convinced.
If you are getting a sore arse when riding a bike then your setup is wrong. There is no need for whatever this abomination is, if your "sit bones" are aching then you need to take the time to actually set your bike up properly.
It isn't just about the height you need to adjust the tilt, how far forward or back it is which is also dependant on how much reach you have with your stem and bars. The size of your frame which also affects things like your reach as well. The positioning of your feet on the pedals which is especially important if you are clipping in.
The list goes on and some shitty tilting saddle is not going to magically alleviate poor bike fit, it is just going to move the aches and pains to other areas on your body like your knees or your shoulders.
Ideally I would want both. I don't think they are claiming that this removes the need for a proper setup.
vast majority of people do not care about having a 'setup'. they are bike bicycle nerds who will spend tons of time and money to get their 'bike fit' right. a proper bike setup is for people who spend $1000s on bikes, not your average consumer who spends under $500 and sees a bicycle as a toy.
they go to walmart, or a bike shop, buy the cheapest bike that looks cool, and ride it. and then stop riding it because it hurts their butt/back/wrists, or they just get bored of it.
That's ridiculous. You don't need to be a bicycle geek to care about the comfort of your commuter vehicle. I'm ten times as geeky about my rollerskates as my bicycle, despite the fact I've spent a hundred times as long on my bike. But I still care about comfort during those hundreds of hours a year on the bike.
- Being ignorant of how to use a tool is not anyone else's fault
- Sharing education that even a cheap bike can be improved by a proper fit is a good thing. It doesn't require expensive gear to get a comfortable fit, assuming you bought the right size bike in the first place
load more comments
(4 replies)
Seems overdone. A simpler, cheaper version of this will probably take off as an alternative, but normal seats are so cheap that they'll stay the default seats.
People with money to burn and sore bottoms will probably buy enough of these to keep the product going a while.
@FartsWithAnAccent @markstos looks very interesting! Not sure how it would turn out on a road bike ๐๐คทโโ๏ธ
I'm not sure how it would turn out on any bike haha
@FartsWithAnAccent I saw a split bike seat a decade ago. Rider said it was very comfortable. Maybe this variant is different because it tilts too. ๐คท
load more comments
(1 replies)
A seat for those with Hemorrhoids.
view more: next โบ