this post was submitted on 26 Sep 2023
191 points (97.0% liked)

Videos

14285 readers
137 users here now

For sharing interesting videos from around the Web!

Rules

  1. Videos only
  2. Follow the global Mastodon.World rules and the Lemmy.World TOS while posting and commenting.
  3. Don't be a jerk
  4. No advertising
  5. No political videos, post those to !politicalvideos@lemmy.world instead.
  6. Avoid clickbait titles. (Tip: Use dearrow)
  7. Link directly to the video source and not for example an embedded video in an article or tracked sharing link.
  8. Duplicate posts may be removed

Note: bans may apply to both !videos@lemmy.world and !politicalvideos@lemmy.world

founded 1 year ago
MODERATORS
top 50 comments
sorted by: hot top controversial new old
[–] zerbey@lemmy.world 48 points 1 year ago* (last edited 1 year ago) (2 children)

The US has no issue with the metric system, and most engineering and scientific people switched decades ago. The military is mostly all metric too. The general public of the US is a harder nut to crack, asking a population of stubborn freedom lovers to change something they've known their whole life is damn near impossible.

I switch my stuff to metric all the time, and the usual response isn't "oh that's interesting", it's nearly always, "the fuck is wrong with you, why would you want that weird shit?!". If the government suddenly made all weather reports metric, the T-Shirt sellers would all become millionaires overnight from selling anti-metric slogans.

[–] Granite@kbin.social 15 points 1 year ago (2 children)

So, what I’m hearing is to get some dropship tshirt designs, and get AI to publish a load of articles about how Dems are pushing metric…

Damn, why do I have morals?

[–] macarthur_park@lemmy.world 13 points 1 year ago

“Don’t give them an inch”

These anti-metric slogans practically write themselves.

[–] lars@lemmy.world 3 points 1 year ago

Swap either:

  • Dems for Reps, or
  • metric for imperials
  • . . .
  • Profit
[–] scarabic@lemmy.world 5 points 1 year ago* (last edited 1 year ago) (1 children)

Americans: go pick up the closest consumer packaged good within reach. You will find it is labeled with metric.

It would be nice to get highway signs in both units, though with Google maps obeying whatever’s selected in your settings, that matters less than ever. Some woodworking stuff is just too far gone down the imperial hole and will never come back. But other than such odd niches, you can live a metric life in the US without much trouble.

[–] FlyingSquid@lemmy.world 2 points 1 year ago (1 children)

Americans: go pick up the closest consumer packaged good within reach. You will find it is labeled with metric.

Yes, but that's likely because they want to sell it in Canada without changing the packaging design, isn't it? Even if they have to put French on the other side for Canada, it's cheaper in terms of development to have a single English design for both the U.S. and Canada, so it will be labeled in both Imperial and metric.

[–] Franzia@lemmy.blahaj.zone 3 points 1 year ago

I thought it was because of China, but hell, all manufacturing probably occurs in metric.

[–] mr_MADAFAKA@lemmy.ml 24 points 1 year ago (9 children)

Americans use metric system for measuring bullets

[–] chetradley@lemm.ee 11 points 1 year ago
[–] MargotRobbie@lemmy.world 5 points 1 year ago

And 2 liter bottles of soft drinks.

[–] Ulv@feddit.nu 4 points 1 year ago (1 children)

Some bullets if they are nato standard or originated in europe. But other wise it can be based in inch or how many round balls you can make by dividing one pound of lead

[–] Bigmouse@lemmy.world 3 points 1 year ago (3 children)

That last one doesnt even make sense. Do you have any info on that? Im curious now

[–] Ulv@feddit.nu 2 points 1 year ago* (last edited 1 year ago)

If the caliber is given in gauge or bore its the pound of lead i think. So a 12 gauge shotgun is the diameter of 1/12pound lead ball

load more comments (2 replies)
load more comments (6 replies)
[–] JCreazy@midwest.social 14 points 1 year ago (7 children)

I try to use metric as often as possible. I measure everything in millimeters in grams. I still haven't switched over to Celsius completely yet but I'd like to.

[–] Sabata11792@kbin.social 12 points 1 year ago (2 children)

I lived hear my entire life and I still can't make sense of the half assed fluid measurements. I just use metric, because what the fuck is a fluid ounce?

[–] davidgro@lemmy.world 4 points 1 year ago* (last edited 1 year ago) (1 children)

To answer your question, 1 fluid ounce is the volume of 1.0431755565 mass (weight) ounces of pure water.

[–] Sabata11792@kbin.social 5 points 1 year ago

1.0431755565

I literally have no words for my seething hatred of this system.
Don't get me started on the damn mile. There's a reason we tell distance in time it takes to drive.

[–] nelly_man@lemmy.world 3 points 1 year ago (1 children)

5 fluid ounces to the gill. 4 gills to the pint. 2 pints to the quart. 4 quarts to the gallon. And 1 gallon is 10 pounds of water.

Except in the US. For us, it's 4 fluid ounces to the gill. 4 gills to the pint. 2 pints to the quart. 4 quarts to the gallon. And 1 gallon is 8 troy pounds of wine.

[–] ElectroVagrant@lemmy.world 2 points 1 year ago

...I imagine you're being serious, but as someone unfamiliar with this, it reads as almost being some kind of obscure joke. Gills?? Troy pounds??

This is some merfolk conspiracy to mess with landfolk, far as I'm concerned.

[–] Johandea@feddit.nu 7 points 1 year ago (2 children)

That's great and all. But by measuring everything in millimetres and grams you miss out on the very thing that makes the metric system great; the easy conversions. You can measure things in millimetres and easily switch to centimeters, just by moving the decimal sign, when the measurement gets large enough. That way you can almost always keep the numbers manageable. No need to say 1500 millimetres. Just say 1,5 m.

[–] JCreazy@midwest.social 4 points 1 year ago

Yes, the metric system is quite great

[–] MeanEYE@lemmy.world 1 points 1 year ago

Weight as well. One liter is exactly 1kg of water. In precipitation (rain amount) 1mm is exactly 1l or 1kg of water on 1m². So when they say there will be 8mm of fall, that's expected around 8l per square meter which is quite intuitive.

[–] scarabic@lemmy.world 4 points 1 year ago

I still like the feel of feet/inches for length, but grams are way, way better for cooking and meal tracking.

load more comments (4 replies)
[–] sh00g@kbin.social 11 points 1 year ago (1 children)

Haven't watched the video, but as someone who works in industry in the US I think the consumer side of a metric switch is the lowest barrier to entry. A much bigger hurdle is the fact that almost all of our raw industrial inputs are built on the imperial system. Need to buy raw plate or bar stock to have something built? It's sized in imperial. And if you want to source metric you're either going to have to pay more for it or look outside the US. And after that raw stock is purchased and you send it to a machine shop that machine shop is almost certainly using exclusively imperial tooling and measurement equipment. You can do the fake metric thing that some companies do where you dual dimension all of your drawings, but those companies will usually still design to imperial so their parts can be fabricated in the US.

I'm absolutely not opposed to a switch to metric. I still perform most of my calculations in metric and then convert to imperial just for ease and because that's how I was taught in school. But it's certainly much more difficult than just deciding one day that we're all going to switch.

[–] Franzia@lemmy.blahaj.zone 2 points 1 year ago

This is the most valuable comment. I use metric everyday, but I can't magically change that my house was built in imperial.

[–] Modern_medicine_isnt@lemmy.world 6 points 1 year ago (1 children)

heres my question. What do they use for a wood 2x4 in metric countries? And does the size actually match the name (unlike the US).

[–] kamikai@lemmy.world 6 points 1 year ago (1 children)

90mm x 45mm is what’s available near me for framing timber. And yes it’s more accurate.

Millimetres in general are used heavily in construction, everything is stated in them, even into the thousands where people normally would have switched to metres.

[–] PP_BOY_@lemmy.world 3 points 1 year ago (1 children)

Millimetres in general are used heavily in construction, everything is stated in them, even into the thousands where people normally would have switched to metres.

Similar thing in the US but with inches vs feet. In framing, no one would ever call for a "3 foot 2 and a half inch block," it's just "38 and a half"

[–] AngryCommieKender@lemmy.world 5 points 1 year ago* (last edited 1 year ago) (1 children)

One yard two and a half inches.

[–] PilferJynx@lemmy.world 5 points 1 year ago

This unreasonably upsets me. Haha

[–] FlyingSquid@lemmy.world 5 points 1 year ago (1 children)

America: Our shit doesn't make sense and we like it that way.

[–] DragonTypeWyvern@literature.cafe 3 points 1 year ago* (last edited 1 year ago)

Every time a Europeasant makes fun of it, we add a new kind of standard measurement.

(While the important stuff is done in metric)

[–] esc27@lemmy.world 4 points 1 year ago

As I see it, the problem is that for the vast majority of people in the U.S. there is no compelling reason to change. People rarely need to convert units and rarely (but more often thanks to social media) need to talk to anyone who uses metric. I see it as a cultural quirk not unlike a dialect.

Of course for science, industry, and other situations where conversion, accuracy, and international communication are involved it very much matters and U.S. needs to use metric as much as possible.

[–] mihnt@kbin.social 2 points 1 year ago* (last edited 1 year ago) (3 children)

It would be an easy switch for me outside of speed and temperature.

I think farenheight makes the most sense when it comes to describing a comfortable temperature. Baking , computers, and what-not, celsius makes more sense.

Speed, well, that'd take me a long time to get used to.

Measuring for home projects and the like wouldn't be difficult as I had already made that switch at my last job.

[–] Deceptichum@kbin.social 13 points 1 year ago (1 children)

Eh American temperatures just sound confusing.

I’ll see headlines like “Record breaking weather over 104 degrees “ and think holy shit people must be dying, and it’s just like only bloody 40 degrees.

[–] mihnt@kbin.social 8 points 1 year ago (4 children)

I just think of it like this. 0 is fucking cold, 100 is fucking hot. It's the easiest for me to describe comfort levels according to temperature.

72 is room temperature, so anything above, it's time to start taking clothes off. Anything below it's time to start putting more on.

32 is around about where water freezes so if it gets close to that, time to make sure pipes are wrapped and plants are inside. Only really have to worry about that one time a year though.

[–] AspieEgg@lemmy.blahaj.zone 11 points 1 year ago

Celsius:
0 is freezing
10 is not
20 is pleasing
30 is hot

[–] ArtyTester@artemis.camp 5 points 1 year ago

In metric you just look at the first digit:

0x is cold

1x is light jacket

2x is shorts weather

3x is hot

load more comments (2 replies)
[–] AspieEgg@lemmy.blahaj.zone 7 points 1 year ago (3 children)

American living in Canada here. It took me a couple of months at most to get used to both. I still couldn’t give you an accurate conversion between metric and imperial, but my brain understands the metric units now. It’s just a matter of using the units in everyday life.

Speed and distance were probably the easiest ones for me. You set your car’s dash to use km/h instead of mph. Then you just follow the road laws like normal. If it says the speed limit is 100 km/h, you just don’t let the number on the dash go much above that. Or you just drive the same speed everyone else does like you do on American roads anyway.

Temperature was a bit more confusing, but you pretty quickly learn that you’ll be happy if you set the thermostat to 18-24 and that if the temperature outside hits 30, it’s going to be a hot day. That kind of precision is more than enough for your mind.

I genuinely used to think I’d have a hard time switching to metric for most things. In my mind, I’d always have to be converting things back to imperial in my head. But that just isn’t the way it works. You quickly just start to relate the units to the real world and you understand it pretty quick.

load more comments (3 replies)
load more comments (1 replies)
load more comments
view more: next ›