1077
this post was submitted on 13 Jan 2025
1077 points (99.0% liked)
Not The Onion
12727 readers
3019 users here now
Welcome
We're not The Onion! Not affiliated with them in any way! Not operated by them in any way! All the news here is real!
The Rules
Posts must be:
- Links to news stories from...
- ...credible sources, with...
- ...their original headlines, that...
- ...would make people who see the headline think, “That has got to be a story from The Onion, America’s Finest News Source.”
Comments must abide by the server rules for Lemmy.world and generally abstain from trollish, bigoted, or otherwise disruptive behavior that makes this community less fun for everyone.
And that’s basically it!
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Carbon steel or cast iron all the way.
Stainless steel! Neither of those is something you want to use to simmer a tomato sauce.
Why's that? I've never owned any of the 3, all pans have been some form of nonstick.
Carbon steel and cast iron cookware have reactive metal surfaces that will rust if left exposed to moisture and air, especially when heated. To use these materials of cookware you need to season them which involves washing the surface clean and applying a very thin layer of oil which you then heat up to a high temperature (usually past the smoke point, but not strictly necessary).
The heating of oil in contact with the metal causes the oil molecules to polymerize and bond to the metal surface. Done properly, this gives your cast iron and carbon steel cookware a smooth, glassy, slightly brown protective polymer layer which prevents rust and helps foods release (though not as well as nonstick pans). The seasoning process can be repeated as many times as you like and it builds up more and more layers which darken over time. A well seasoned piece of cast iron or carbon steel cookware will look shiny and jet black, though this is not necessary for cooking.
The downside of these materials is that acidic or basic foods can damage the polymer layer and dissolve it right off the pan with enough heat and cooking time. Tomato sauce is a classic example of an acidic food that will eat away at the seasoning of a cast iron or carbon steel pan. A well seasoned pan can still be used to cook a tomato sauce, but not one you plan to be simmering for hours and hours (like some Sunday meat sauce like you’d see in Goodfellas).
Stainless steel (as well as enameled or porcelain coated) cookware is nonreactive so you can use it to cook acidic or basic foods no problem!
Ohh right, I didn't think about how acidic tomatoes are. I love tomatoes, but some of the people around me get absolutely horrible stomach pains apparently.
Anyway, we make tomato based sauces at home, but never have we simmered anything for several hours like that cooking scene in Goodfellas. Should I? Would it be significantly better?
It depends what you’re going for. There are a lot of classic long simmered tomato sauces, they are a different thing than fast cooked ones though. Long cooked ones tend to be more mellow and complex, but lose some of the acidic zing, adding a bit of vinegar or wine at the end can bring that back though.
Just don’t make them in a cast iron, not only will the strip the seasoning, they will also absorb some iron, great if you have an iron deficiency, but it can make the sauce taste a bit metal-y.
Oh you've got no idea how good tomato sauce can get then! It's also great for making huge batches so you freeze most of it for later.
Hmmmm I have some bad ideas now, thanks!
I thought there, who on earth makes tomato sauce in a non-stick pan 😅
Nice writeup btw!
So my stainless steel/inox Lagostina pan is non reactive? What would be the benefit from having a carbon steel one (I have used cast iron a lot but it's so heavy)?
Any community you'd recommend?
Carbon steel is lighter but this also has less thermal mass, so it heats up and cools down faster, also tends to have less even heating.
So, searing something quickly on a preheated pan is a bit harder since the pan will cool off faster as the food leaches the heat out. Important for stuff like stir fry’s or steaks where you want short periods of intense heat for good searing at the surface but not over cooking in the interior.
Exactly that: weight. Some people will give you other reasons why they like carbon steel but the most important is that it works like cast iron only lighter
A well seasoned carbon steel is pretty much non-stick while in a stainless you usually want some sticking to have something to deglaze for sauces.
Mine sticks enough for a nice sauce :-) !
I don't want to cause a panic, but acids like tomato juice, ascorbic, citric and vinegar can attack stainless steel and dissolved chrome in the process.
But don't think of it as extra chrome in your diet. After all, we get iron rich water from our cast iron pipes and fittings. Nah, think of it as that extra cancer you're gonna be getting! Iron never gave you cancer, that's a lousy metal. But chrome is pretty good!
Aw man...
https://theproperkitchen.com/do-stainless-steel-pans-leach-into-food/
Yes and no, apparently.
Sure, or enamelled cast iron.
A bit ironic that a group labeling themselves the "Cookware Sustainability Alliance" is fighting to continue making unsustainable cookware.
Both the fact that they have a voice that influences politicians more than their actual voters and that they're allowed to call themselves that name is really a perfect representation of society.
Available at a thrift store near you, with no carbon cost!
Used cast iron is usually better than a lot of new stuff. Back in the day, it was common for the pitted surfaces to be ground smooth.
Now you can only get that with some “premium brands” that are willing to take a grinder to a pan before throwing it in the box.
Got a few inherited from my grand and great grand parents, they’re amazing and perfect. Even got a cast iron muffin tin which is great for making Yorkshire puddings.
SO THAT IS WHY MY FRYING PAN IS ANNOYING!
I just thought it was going to be naturally ground down over time...
Damn it, now I gotta find a thrift store.
Or you can season the shit out of it. That will also smooth out the surface. Seasoning basically makes non-stick layers on your pan using burned oil.
Preferably outdoors wipe a thin film of cooking oil on the pan and heat it up till it smokes, leaves smokey for a bit, cool down and repeat.
It'd probably be smart to read real instructions somewhere else, but that's the jist of it.
You can still get vintage Wagner cast iron for a decent price on eBay or FB marketplace, but over the past 15 years people have started to catch on to what I just mentioned. So it’s not as dirt cheap as it once was.
These days I generally know how to cook on a pitted lodge without it sticking, but smooth cast iron is more forgiving.
The difference is what part is more forgiving
Season it with Flax seed oil. Worth the $10 for the bottle, and time.
Cooks Country came up with Flax seed oil after a lot of testing.
http://www.cooksillustrated.com/how...d=26897&frtk=u3VJqn8v17q3E4m0demcX4pjog35T4sL
Oops, that link is expired!
My experience with flaxseed oil was less than stellar. It works real nice at first, you get a good strong non stick seasoning, but after a few uses it starts flaking off. My guess is that it forms too hard of a coating, so when the pan expands and contracts through use, it starts to separate from the seasoning. Avocado oil works pretty well, and so does normal vegetable or canola oil. The surface isn't as nice as a fresh flaxseed oil coating, but it's a lot more forgiving through use.
It starts getting better after 10 or so years when the seaaoning has built up to fill the surface roughness.
Or you sand it down to be smooth and reseason it.
Buying thrift store cast iron is risky, it may have been used to melt lead.
Sorry if this is a dumb question, but why would you use it to melt lead?
https://www.theballisticassistant.com/turning-scrap-lead-into-a-resource/
Sigh, just when I thought I found a way to get a smooth frying pan, look in my comments, I litterarly just posted here....
Why would people melt lead in a frying pan?
Most often to make their own bullets.
Ah, but why in a frying pan?
Cheap, commonly available, convenient.
Fair, but you can get a lead testing kit for around $10 USD.
Enameled cast iron is also great
Is this the ceramic coated ones?
https://prudentreviews.com/ceramic-vs-enameled-cookware/
Costly but good
Cast iron is cheap at the second hand store.