sorted by: new top controversial old
[-] xabadak@lemmings.world 1 points 1 week ago

No worries, and thanks for providing a response nonetheless. I'll look into your suggestion when I have the time. The official Wireguard website also had some guide on network namespaces here but afaik it didn't explain how to set it up persistently

[-] xabadak@lemmings.world 3 points 1 week ago

So it's really that simple...I can see why there are security issues 😅

[-] xabadak@lemmings.world 3 points 1 week ago* (last edited 1 week ago)

Great write-up, I've been looking for something like this. I've heard of vopono and eznetns before but not namespaced-openvpn, and this is the first post I've seen where somebody details how they use a tool like this, so thanks! I'll have to try setting it up some time.

[-] xabadak@lemmings.world 2 points 1 week ago

Yeah, you don't have to dig very deep to find out how insecure our networks are. Mac addresses can be spoofed, ports can be scanned, TCP numbers can be guessed, etc...

[-] xabadak@lemmings.world 5 points 1 week ago

From a privacy standpoint I don't think it would make a big difference over not using a VPN at all. It will take a bit of time but your new IP will become associated with your identity. From the perspective of Facebook and Google, it will just look like you moved and are living inside a datacenter now.

[-] xabadak@lemmings.world 4 points 1 week ago

That sounds very cool, I've been interesting in network namespaces but it's hard to find information on how to use them. How did you do it?

[-] xabadak@lemmings.world 6 points 1 week ago

If exposing hostnames and IP addresses is dangerous

It's not necessarily dangerous, but it's a major privacy issue. Hiding your browsing history from other people (except for the VPN provider) is one of the main reasons why people get a commercial VPN in the first place. And this vulnerability mainly concerns those users.

[-] xabadak@lemmings.world 3 points 1 week ago* (last edited 1 week ago)

I added clarification that the HTTPS part is assuming that the attacker has already performed the DHCP attack. Thanks for the note!

The DHCP race is one part I didn't go into detail about since I'm not very familiar with the details, but what you wrote makes sense. One potential danger is a hacker at a coffee shop, where the shop owner is unlikely to be monitoring the network, and there are going to be many new connections coming in all the time. It's still an unlikely scenario, but it also isn't a particularly difficult attack.

[-] xabadak@lemmings.world 1 points 1 week ago

No offense taken, on the contrary thanks for the constructive criticism! I'll add some more details to my repo to make things more clear.

[-] xabadak@lemmings.world 2 points 1 week ago

Yeah, it does come down to threat model and preference. If you only need to route specific apps, Gluetun sounds like a great solution.

[-] xabadak@lemmings.world 1 points 1 week ago

I see what you mean now. I wouldn't advocate for people to disable DHCP features either. It should be the VPN provider's responsibility to provide a proper VPN client that mitigates attacks like these.

85
submitted 1 week ago* (last edited 1 week ago) by xabadak@lemmings.world to c/privacy@lemmy.ml

I've been seeing a lot of confusion around the TunnelVision vulnerability. While I'm no expert, I've done a fair share of research and I'll edit this post with corrections if needed. The goal of this post is to answer the question: does this affect me?

Two sentence summary of the vulnerability

When you use a commercial VPN like Mullvad or NordVPN, the VPN client tells your system to redirect all traffic through the VPN. This recent vulnerability shows that a malicious device on the network can trick your system into redirecting traffic to their device instead.

Claim: just don't connect to hostile networks!

This is hard in practice. For most people, the only "trusted" networks are your home network and your workplace. So you still have to worry about coffee shops, airports, hotels, restaurants, etc. And if you are using cellular data, the cellular tower can perform this attack to snoop on your traffic.

Claim: but I trust the hotel owner, restaurant owner, etc

This attack allows any device on the network to impersonate a DHCP server and attack your system, not just the router. And while there are router settings that can prevent devices on the network from talking to each other, afaik they are rarely used. So even if you trust the owner of the cafe, you have to also trust everybody else in the cafe.

Claim: if you use HTTPS you are safe!

If the attacker redirects traffic to their machine, then even if you use HTTPS, the attacker can still see what websites you connect to, they just can't see what you are sending or receiving. So basically they can steal your browsing history, which defeats the purpose of a commercial VPN for many users.

Claim: Linux users are safe!

Not quite. The report says that Linux has a feature that is able to fully defend against this vulnerability, called network namespaces. So if your VPN uses that, congratulations. Afaik most VPNs do not use this, and instead use a kill-switch or a firewall. In which case Linux, Mac, and Windows users are all affected the same way, and I go into it more in the next claim.

Claim: if you use a kill-switch you are safe!

The term "kill switch" gets thrown around a lot but there's actually two major ways that a kill-switch can be implemented. The first way is a more literal "kill switch" - when the VPN connection drops, the kill switch is triggered and blocks leaks. The other way is a persistent firewall, which blocks leaks all the time.

If your VPN client uses the first kind, then bad news, it won't protect you against this attack. This is because the VPN connection is never dropped, so the kill switch is never triggered. NordVPN was caught using this poor practice, to nobody's surprise (more info here).

If your VPN uses the second kind, then you should be safe. For example, Mullvad published a statement about how they are not vulnerable here. I would hope that any competent VPN would also use a persistent firewall, but if your VPN provider hasn't published a statement yet, unfortunately your only other option is to inspect the VPN client yourself.

That being said, even if your VPN uses a persistent firewall, you may have read in the report that there's a "side-channel" attack still possible...

Claim: even if you use a firewall, there's a side-channel attack

This is true, but from what I read the side-channel is actually very hard to pull off and gain any useful information from. You can read some discussion about it here. My takeaway is that if you're a regular user, you don't have to worry about it. But we should still push VPN providers and network engineers to use network namespaces in their applications, since they are more resistant to these kinds of attacks.

Claim: you shouldn't trust commercial VPN providers anyways

This is not really about the vulnerability but I've seen it a lot in the discussions. I think it's a mischaracterization of why people use VPNs. If you are using the internet, somebody has to send that traffic to your destination. The three major options are your ISP, a VPN provider, or Tor. Depending on your location and your circumstances, you will trust these three differently. In the EU, ISPs are not allowed to sell data. In the US, ISPs are allowed to, and have been caught doing so. VPNs can sell data too but they risk losing their entire business. Tor is much harder to judge, but the bigger issue with Tor is that many websites block it.

Further reading:

[-] xabadak@lemmings.world 2 points 1 week ago

Yeah TOR is an example of a mixnet. WHat I was talking about was a combination of your Scenario A and Scenario B, where you have a mixnet where everybody's traffic goes through multiple proxies, and many people are using each proxy, and you have padding and timing added to make sure traffic flows are consistent. As far as trusting nodes, you have to do that regardless of your set up. If you don't use any VPN, you have to trust your ISP. If you use a VPN like Mullvad, you have to trust Mullvad. If you use a mixnet, you have to trust that all your chosen proxies aren't colluding. So like you said, it's up to your own judgement and threat model.

49
submitted 1 week ago by xabadak@lemmings.world to c/privacy@lemmy.ml

cross-posted from: https://lemmings.world/post/8926396

In light of the recent TunnelVision vulnerability I wanted to share a simple firewall that I wrote for wireguard VPNs.

https://codeberg.org/xabadak/wg-lockdown

If you use a fancy official VPN client from Mullvad, PIA, etc, you won't need this since most clients already have a kill switch built in (also called Lockdown Mode in Mullvad). This is if you use a barebones wireguard VPN like me, or if your VPN client has a poorly-designed kill switch (like NordVPN, more info here).

A firewall should mitigate the vulnerability, though it does create a side-channel that can be exploited in extremely unlikely circumstances, so a better solution would be to use network namespaces (more info here). Unfortunately I'm a noob and I couldn't find any scripts or tools to do it that way.

69
submitted 1 week ago by xabadak@lemmings.world to c/linux@lemmy.ml

In light of the recent TunnelVision vulnerability I wanted to share a simple firewall that I wrote for wireguard VPNs.

https://codeberg.org/xabadak/wg-lockdown

If you use a fancy official VPN client from Mullvad, PIA, etc, you won't need this since most clients already have a kill switch built in (also called Lockdown Mode in Mullvad). This is if you use a barebones wireguard VPN like me, or if your VPN client has a poorly-designed kill switch (like NordVPN, more info here).

A firewall should mitigate the vulnerability, though it does create a side-channel that can be exploited in extremely unlikely circumstances, so a better solution would be to use network namespaces (more info here). Unfortunately I'm a noob and I couldn't find any scripts or tools to do it that way.

view more: next ›

xabadak

joined 1 week ago