beh_93825561489

might be helpful cross-posted from: https://lemmy.ml/post/9547307

so since I digged pretty hard to find what is a ucm profile and how to seperate headphones from speakers in pipewire and alsa so yeah heres a guide first of all these are my sources:

https://github.com/luisbocanegra/linux-guide-split-audio-ports https://www.reactivated.net/writing_udev_rules.html https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3556 https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3552

you need a custom ucm profile use this command since its helpful lspci -nn -vvv

SUBSYSTEM!="sound", GOTO="pipewire_end"
ACTION!="change", GOTO="pipewire_end"
KERNEL!="card*", GOTO="pipewire_end"

ATTRS{subsystem_vendor}=="0x103c", ATTRS{subsystem_device}=="0x8742", ENV{ACP_PROFILE_SET}="custom.conf"

LABEL="pipewire_end"

and than create a file in /usr/share/alsa-card-profile/mixer/profile-sets/custom.conf and yeah I guess

https://www.freedesktop.org/wiki/Software/PulseAudio/Backends/ALSA/Profiles/

and this especially

https://github.com/luisbocanegra/linux-guide-split-audio-ports

they helped a lot

[General]
auto-profiles = yes

[Mapping headphones]
device-strings= hw:0,2
channel-map = left,right
paths-output = behe-headphones
paths-input = analog-input-headphone-mic analog-input-headset-mic
priority = 20

[Mapping speaker]
device-strings= hw:0,0
channel-map = left,right
paths-output = behe-speaker
paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
priority = 18

[Profile help]
input-mappings = speaker headphones
output-mappings = speaker headphones
description = both_both_is_good
skip-probe = yes
priority = 100

.include 9999-custom.conf

and yes that was my custom.conf and yes just reboot now and you are set btw no need to touch hdajackretask and that idor 0,2 and 0,0 I just switched profile to proaudio and than ran pactl list sinks short and took the ids from there I am basically following the guides and mimicking /usr/share/alsa-card-profile/mixer/profile-sets/default.conf to be completely honest yes thats all

might be helpful to someone so here we are cross-posted from: https://lemmy.ml/post/9547307

so since I digged pretty hard to find what is a ucm profile and how to seperate headphones from speakers in pipewire and alsa so yeah heres a guide first of all these are my sources:

https://github.com/luisbocanegra/linux-guide-split-audio-ports https://www.reactivated.net/writing_udev_rules.html https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3556 https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3552

you need a custom ucm profile use this command since its helpful lspci -nn -vvv

SUBSYSTEM!="sound", GOTO="pipewire_end"
ACTION!="change", GOTO="pipewire_end"
KERNEL!="card*", GOTO="pipewire_end"

ATTRS{subsystem_vendor}=="0x103c", ATTRS{subsystem_device}=="0x8742", ENV{ACP_PROFILE_SET}="custom.conf"

LABEL="pipewire_end"

and than create a file in /usr/share/alsa-card-profile/mixer/profile-sets/custom.conf and yeah I guess

https://www.freedesktop.org/wiki/Software/PulseAudio/Backends/ALSA/Profiles/

and this especially

https://github.com/luisbocanegra/linux-guide-split-audio-ports

they helped a lot

[General]
auto-profiles = yes

[Mapping headphones]
device-strings= hw:0,2
channel-map = left,right
paths-output = behe-headphones
paths-input = analog-input-headphone-mic analog-input-headset-mic
priority = 20

[Mapping speaker]
device-strings= hw:0,0
channel-map = left,right
paths-output = behe-speaker
paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
priority = 18

[Profile help]
input-mappings = speaker headphones
output-mappings = speaker headphones
description = both_both_is_good
skip-probe = yes
priority = 100

.include 9999-custom.conf

and yes that was my custom.conf and yes just reboot now and you are set btw no need to touch hdajackretask and that idor 0,2 and 0,0 I just switched profile to proaudio and than ran pactl list sinks short and took the ids from there I am basically following the guides and mimicking /usr/share/alsa-card-profile/mixer/profile-sets/default.conf to be completely honest yes thats all

so since I digged pretty hard to find what is a ucm profile and how to seperate headphones from speakers in pipewire and alsa so yeah heres a guide first of all these are my sources:

https://github.com/luisbocanegra/linux-guide-split-audio-ports

https://www.reactivated.net/writing_udev_rules.html

https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3556

https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3552

you need a custom ucm profile use this command since its helpful lspci -nn -vvv

SUBSYSTEM!="sound", GOTO="pipewire_end"
ACTION!="change", GOTO="pipewire_end"
KERNEL!="card*", GOTO="pipewire_end"

ATTRS{subsystem_vendor}=="0x103c", ATTRS{subsystem_device}=="0x8742", ENV{ACP_PROFILE_SET}="custom.conf"

LABEL="pipewire_end"

and than create a file in /usr/share/alsa-card-profile/mixer/profile-sets/custom.conf and yeah I guess

https://www.freedesktop.org/wiki/Software/PulseAudio/Backends/ALSA/Profiles/

and this especially

https://github.com/luisbocanegra/linux-guide-split-audio-ports

they helped a lot

[General]
auto-profiles = yes

[Mapping headphones]
device-strings= hw:0,2
channel-map = left,right
paths-output = behe-headphones
paths-input = analog-input-headphone-mic analog-input-headset-mic
priority = 20

[Mapping speaker]
device-strings= hw:0,0
channel-map = left,right
paths-output = behe-speaker
paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
priority = 18

[Profile help]
input-mappings = speaker headphones
output-mappings = speaker headphones
description = both_both_is_good
skip-probe = yes
priority = 100

.include 9999-custom.conf

and yes that was my custom.conf and yes just reboot now and you are set btw no need to touch hdajackretask and that idor 0,2 and 0,0 I just switched profile to proaudio and than ran pactl list sinks short and took the ids from there I am basically following the guides and mimicking /usr/share/alsa-card-profile/mixer/profile-sets/default.conf to be completely honest yes thats all

-=-=-=-==-==--==

very fast update you actually have to enable indep_hp in hdajackretask btw fun fact you can apply now and test after killing wireplumber so don't forget to do that don't reboot over and over again (I am talking to myself here mostly also enable indep_hd using alsamixer after you do so in hdajackretask) and yes thats all peace

yes I talked to the developers and well I guess I am supposed to figure it out myself but I don't know how so I am basically seeking help here this is the bug report: https://github.com/systemd/systemd/issues/28942

I guess I should post my own pr but I have no idea how to say to udev that the key specified as d8 is actually the lid being closed and the key specified as d7 is actually the lid being open

basically yes I am a noob and a helpful response will be just a documentation page to show me where can I begin to fix this problem

basically each of the following: fn+f2 or fn+f3 (not even being recognised by evtest ) and the lid being closed or opened is being reported as "Event: time 1692812642.988180, type 1 (EV_KEY), code 238 (KEY_WLAN), value 1".

so I though about remapping "Event: time 1692812642.988180, type 4 (EV_MSC), code 4 (MSC_SCAN), value d7" as the closing lid thingy

the same for fn+f2 and fn+f3 (increase and decrease brightness) I have to remap this "Event: time 1692812647.457821, type 4 (EV_MSC), code 4 (MSC_SCAN), value ab" so my question is I can remap the keyboard here 60-keyboard.hwdb but where can I remap the ev_msc stuff

basically all this to say I want to tell udev that the msc this with id d7 is actually the toggle for closing the lid and the msc thing with id ab are actually the two buttons that increase and decrease brightness and yeah that's all

so I want to create two scripts

• first one that basically runs "systemctl suspend" when the lid is closed basically the default behavior doesn't work for some reason and running systemctl suspend always works so yeah you get the idea

• since I have made the headsets aka the jack output and the default speakers each their respective sink (that's what I actually want (to have the power to put whatever I want in each sink using qpwgraph ) ) but that power comes at the cost of not switching between those respective two sinks so I just want to change I guess either the wireplumber config file or create a systemd service that runs when the jack port is plugged or unplugged

but I am lost in both questions to be honest and wireplumber is a mystery lol - sorry for being a noob if that matters

so closing the lid actually stops the wifi the bluetooth but since I am using swayidle for some reson suspending by closing the lid doesn't tell swayidle to actually show up even though pressing the shutdown button which I made it suspend for tests it actually works in the shutdown button so I am guessing this is an nvidia issue I am using nvidia-dkms not even the open ones so to mitigate this issue I though about making systemd ignore it when the lid closed and just right my own script when runs when the system suspends which is basically just systemctl suspend so any ideas

UPDATE_1: yes I wanted to add that I thoroughly checked "journalctl --system" and it was not helpful at all it seems my laptop sends an unknown key that correspends to other laptops tablet mode and that is funny since my laptop has none

well and systemd basically rfkill soft block wifi and doesn't actually enable it again when the lid is open so yeah I guess the solution I gave is fair enough I guess

the game will basically show the load screen and not porceed to show anything else it used to launch without launch options and making it use wine3d using a launch option will not work can any of you actuallly run it this is blatantly confusing I tested using proton 8-03 and proton hot fix and experimental

on my question about torrentleech they seem to open their doors quiet frequently so yeah I am planning to enter the next time they do my question is what are the rules actually

• I found a post from 2 years ago and it says you have to either have a download ratio of 1:1 on the files you download or you seed them for 10 days so my question: is there a way actually to see those stats before deleting that file

• for exemple if Ic seed like for 9 days will I still get a warning isn't there a threshhold

• If I seed for exemple everyday for 10 hours and then shutdown my pc like any normal person than do the same thing for the next 30 days with variation in those 10 hours theoratically speaking I seeded for more than 10 days or sould I constantly seed for 10 days like my pc shouldn't shut down cause if that's the case then hate to break it to you but in some reagions electricity isn't stable

• there is a question I always wanted to ask if you can't reupload stuff in the private repo to anywhere and they somehow will find that out then how is the stuff in the public trackers there in the first place

• as long as the rules are not 10 days in a row I have no problem doing them since well I already have searxng always running in the background lol

• to be honest all my torrent usage is that once in a while anime or movie and I usually keep the file until the ration is like above 1 since I don't mind

• another question are there a lot or qualities and resolutions in torrentleech since if the file is like 20 gb I don't think I will ever reach that 1 ratio I usually go for the 1080p even 720 when the file size is huge + yeah sorry I have 500 gb ssd lol