Eric_Pollock

joined 1 year ago
[–] Eric_Pollock@lemmy.dbzer0.com 31 points 4 days ago (58 children)

Is this a serious thing? It seems so normal here in the states.

[–] Eric_Pollock@lemmy.dbzer0.com 3 points 2 weeks ago* (last edited 2 weeks ago)

👁️👁️
(------)

[–] Eric_Pollock@lemmy.dbzer0.com 25 points 3 weeks ago (3 children)

The episodic rollout of SQ42 is presumed to be a way to inject new cash into the studio alongside reported plans to release higher priced ships and the rumored third game.

What?... Higher priced ships? You've got to be joking...

One of my favorite ships in the game, the Drake Corsair, is already $250. It's a great all-rounder, but it's not even a large ship comparitively! And they're going to start charging more for the newer ships?!

They just released a new ship as well, the RSI Zeus MKII, which is yet another $175. And that doesn't even mention some of the larger ships like the Anvil Carrack, sitting at an insane $600, and the Origin 890 Jump at $950...

And if that's not bad enough, they've had concept ships for years available for purchase in the $1,500-$2,000 range. How can these ships get more expensive?

[–] Eric_Pollock@lemmy.dbzer0.com 16 points 1 month ago (5 children)

So if working at McDonald's is now a form of punishment... What's that saying about the job itself even if you are being paid?

At what point can you be paid a low enough wage to where you're essentially working at McDonald's as a punishment for existing? Very weird standard their setting with this decision...

I didn't realize there were mods that could do that... What are some games that you've used this on?

[–] Eric_Pollock@lemmy.dbzer0.com 37 points 1 month ago (14 children)

Aren't the layers in the rock showing that water was definitely present on Mars, and that they're formed by sediment being deposited and forming into sedementary rock over time?

[–] Eric_Pollock@lemmy.dbzer0.com 101 points 2 months ago

Did this post receive more engagement than the game itself?...

[–] Eric_Pollock@lemmy.dbzer0.com 1 points 2 months ago

Tried to go mining my SO with dual ROCs. Filled them to the brim, then found out there's no way currently to sell anything from them because of the physicalized inventory.

Now we have collectively ~$200,000 sitting in our storage crates because we can't sell...

[–] Eric_Pollock@lemmy.dbzer0.com 3 points 2 months ago* (last edited 2 months ago)

What do I do about this?

Edit: Nevermind, ignored the part where it says to "Use "C:" as destination. My bad!

[–] Eric_Pollock@lemmy.dbzer0.com 29 points 2 months ago* (last edited 2 months ago) (11 children)

Server to host media. Super easy to set up and can run on a Windows client. Don't even need an independent server to run it on. https://jellyfin.org/

https://kodi.tv/ (or https://libreelec.tv/ for an OS that boots to just Kodi)

Application to watch through Kodi https://github.com/jellyfin/jellycon

Client to run Kodi on: MeLE PCG02 Mini PC Stick https://a.co/d/1EGnekO

If you didn't want to install LibreELEC to the PC and just want to keep Windows, you could run Kodi in Kiosk mode and it would boot directly to it just like LibreELEC.

I have not watched normal TV in years, let alone an ad on my TV. I spoke to my neighbors one day and figured out they were paying ~$60 a month for all their streaming services, and they're STILL getting ads...

Stuff like this is unacceptable, and I refuse to partake in the lunacy and delusion that is modern television.

[–] Eric_Pollock@lemmy.dbzer0.com 11 points 3 months ago

I really like Fast Draw. I wanted the app pages like Nova has, and personally didn't really need any more than that. This one works like a charm!

https://github.com/peterfajdiga/FastDraw

29
submitted 4 months ago* (last edited 4 months ago) by Eric_Pollock@lemmy.dbzer0.com to c/linux@lemmy.ml
 

Hello! I use Bazzite Linux with KDE, and I'm having some issues with duplex printing on my system.

I have a Brother HL-L2300D, and I've already installed the drivers for it. Brother provides an install script for their driver on their website, but because my system is rpm-ostree based and immutable, I would get rpm-ostree errors and the installation would fail.

I found a Reddit post yesterday that suggested running sudo rpm-ostree install printer-driver-brlaser, which worked and I was able to connect to the printer and configure everything as needed.

However, when I try to print on both sides of the page, the back side of the page prints upside-down. I've tried changing the setting for which edge to flip when printing (portrait/landscape), and it doesn't seem to change anything. I printed the same document on a Windows machine on this printer, and it went through just fine, so I've isolated the problem down to the CUPS server that my machine is running.

If there's any more information I can provide, please let me know. I've tried the troubleshooting steps I know and have reached the limit of my knowledge.

 

Creating importer: Failed to invoke skopeo proxy method OpenImage: remote error: cryptographic signature verification failed: invalid signature when validating ASN.1 encoded signature ___

I was banging my head against my keyboard for an hour thinking that I broke my system until I saw this.

 

Edit: I found the solution! All I had to do was add the uid with my username, then I also had to add "forceuid" for it to actually go through. My fstab entry now looks like:

//192.168.1.21/Media-Library /mnt/Home-NAS/Media-Library cifs user=Jellyfin,password=password,uid=my_uid,forceuid,iocharset=utf8 0 0

Thank you @lemmyreader@lemmy.ml for posting the solution from Stack Exchange!


Hello! I have an Ubuntu server with a NAS mounted using cifs-utils, and I've created an entry in fstab for the share to be mounted at boot.

My fstab entry looks like this:

//192.168.1.21/Media-Library /mnt/Home-NAS/Media-Library cifs user=Jellyfin,password=password,iocharset=utf8 0 0

(The password is not actually "password" of course)

However, while I'm able to access the share perfectly fine, and even have a Jellyfin server reading from it, I cannot write files to the share without using sudo. I have some applications that manage metadata for music, and they're not able to change or add files in any way.

I am however able to access the share from my Fedora machine just fine with the same credentials, since I use KDE, I just added them to the default "Windows Share Credentials" setting. I don't have the issue where I have to use sudo to modify files, so I know it's just an issue with the share mounted to the server and not permission issues on the NAS itself.

What am I doing wrong?

view more: next ›