this post was submitted on 11 Sep 2024
641 points (98.5% liked)

Just Post

623 readers
63 users here now

Just post something 💛

founded 1 year ago
MODERATORS
 
top 50 comments
sorted by: hot top controversial new old
[–] Bougie_Birdie@lemmy.blahaj.zone 104 points 1 month ago* (last edited 1 month ago) (3 children)

I learned this when I was a wee lad: I was playing Runescape and trying to solve a quest I was stuck on with a walkthrough. The guide said that the macguffin was on the first floor of some building, and I must have spent hours looking on the ground floor with no luck.

I finally asked my big brother for help and he said, "Have you tried looking upstairs?" And there it was, blew my mind.

[–] britishblaze@lemmy.world 33 points 1 month ago

This is why the wiki now has a converter for British to American floorings

[–] SaintWacko 15 points 1 month ago

Dude, I had the same problem, but with a clue scroll! I cannot tell you how long I spent searching the bottom floor of buildings around the Ardougne square...

[–] TehBamski@lemmy.world 10 points 1 month ago (4 children)

#Computergamestaughtmesomething

load more comments (4 replies)
[–] spankmonkey@lemmy.world 80 points 1 month ago (12 children)

In the US we use either 1st floor and Ground floor to refer to the same floor. The second and higher floors are consistently named though, except for those buildings that skip the 13th floor.

[–] aeronmelon@lemmy.world 35 points 1 month ago (1 children)

except for those buildings that skip the 13th floor.

When I was in Malaysia, buildings marked floors in British English and skipped any number ending in four (bad luck for Chinese). #MildlyInfuriating

load more comments (1 replies)
load more comments (11 replies)
[–] Professorozone@lemmy.world 76 points 1 month ago (46 children)

I'm American and I often think we do things wrong...

but not this. First floor on the SECOND floor. It's just wrong.

[–] norimee@lemmy.world 20 points 1 month ago (1 children)
[–] Numuruzero@lemmy.dbzer0.com 18 points 1 month ago (1 children)

Right, the first floor after you ascend from the... Initial floor, which is on the ground, QED.

load more comments (1 replies)
[–] Noel_Skum@sh.itjust.works 14 points 1 month ago (5 children)

We think of it as the first floor that is above the level of the ground - the planet supplies ground level, we just count every level we put above it.

load more comments (5 replies)
load more comments (44 replies)
[–] perviouslyiner@lemmy.world 38 points 1 month ago* (last edited 1 month ago) (14 children)

Distribution of the two (pink is mixed) from Wikipedia:

distribution of the two

[–] booly@sh.itjust.works 16 points 1 month ago (3 children)

What's crazy is that it's not consistent by language. Obviously we have British/Aussie/Kiwi vs US/Canadian English, but the Spanish speaking world is also fractured.

load more comments (3 replies)
load more comments (13 replies)
[–] Signtist@lemm.ee 32 points 1 month ago (4 children)

Never understood how ground floor and first floor aren't always synonymous. If the ground floor is a floor, then how could it not be the first of the floors?

[–] TehBamski@lemmy.world 21 points 1 month ago (6 children)

They might think of it as zero floor as if you were dealing with the decimal system. You even start your number count with a zero in computer science.

[–] norimee@lemmy.world 12 points 1 month ago

European elevators often have the ground floor as 0.

I think it's because we are counting the upstairs. In german the word is "Stock" like you stack something onto the base building.

load more comments (5 replies)
[–] Daerun@lemmy.world 9 points 1 month ago

That's because in some languages the word for "floor" is not sinonimous to "ground", and thus floor means somethimg that is above the ground.

load more comments (2 replies)
[–] Kazumara@discuss.tchncs.de 26 points 1 month ago* (last edited 1 month ago) (4 children)

In German we call the floors "Geschoss" we have "Erdgeschoss" (earth-floor) and then "Obergeschoss" (above-floor) "Untergeschoss" (under-floor). So you have the ground floor called EG, above it is 1.OG then 2.OG, etc. From the EG downwards there is the 1.UG and further down the 2.UG, etc.

With this terminology there can't be any confusion, because there needs to be a reference floor from which to count up and down. Lucky us.

[–] accideath@lemmy.world 10 points 1 month ago

Sometimes (not sure how regional it is, but at least where I live, it’s predominant), „Stock“ is also used for upper floors, so you have „Erdgeschoss“ and then „1. Stock“, „2. Stock“, etc.

You wouldn’t use this in official descriptions but in conversation this is wayyy more common.

Oh, and if you live directly under the roof, you can also refer to that as „Dachgeschoss“ ("roof floor"), especially if you, like me, lost count on which floor number you actually live.

load more comments (3 replies)
[–] blaue_Fledermaus@mstdn.io 23 points 1 month ago

Not exclusive to UK or US; here in Brazil me and my wife are from neighboring states and have this same difference in floor naming.

[–] lustyargonian@lemm.ee 22 points 1 month ago (2 children)

British use 0 indexing? Never thought about it like that huh

load more comments (2 replies)
[–] dejected_warp_core@lemmy.world 21 points 1 month ago (3 children)

Me: What is this we're standing on?

Patrick: The floor.

Me: And if I go up the stairs, what will I be standing on?

Patrick: The floor.

Me: So there is a floor above this one?

Patrick: Yes.

Me: And in order, that floor upstairs would come after this one?

Patrick: Yes.

Me: So, that would make it the second floor I've touched after coming inside?

Patrick: Yes.

Me: So which floor are we on now?

Patrick: Ground floor.

load more comments (3 replies)
[–] Broken@lemmy.ml 20 points 1 month ago (4 children)

Hot tip in the US. In an elevator the floor with the star is the ground floor, regardless of what number is present. This helps clarify any confusion between systems and also is clear for locations that have floors below the ground floor (I've most commonly seen this with parking structures)

[–] dafo@lemmy.world 12 points 1 month ago (2 children)

In Sweden, maybe the rest of the EU, the entrance floor (entrevåning) has a green ring around it.

load more comments (2 replies)
load more comments (3 replies)
[–] johannesvanderwhales@lemmy.world 20 points 1 month ago (2 children)

I would be okay with this if Britain started with the zeroth floor.

load more comments (2 replies)
[–] Kolanaki@yiffit.net 19 points 1 month ago* (last edited 1 month ago) (1 children)

As someone who does a bit of programming, I think a 256 story tall building should have floors 0-255. But as an American there should be 257 total floors so we can skip floor 13 because it's bad luck.

load more comments (1 replies)
[–] emerald@lemmy.blahaj.zone 19 points 1 month ago (1 children)

I didn't know they used 0-indexed buildings in ingerland

[–] repungnant_canary@lemmy.world 12 points 1 month ago (3 children)
load more comments (3 replies)
[–] Daerun@lemmy.world 18 points 1 month ago

Wait for the old spanish way of doing it. It was abandoned some 40-50 years ago and now we use the same as the british system, but the traditional way of doing it was (bottom to top on this same image): -Bajos -Entresuelo -Principal -First

[–] RandomStickman@fedia.io 18 points 1 month ago (3 children)

The older buildings in Hong Kong often need to clarify this to avoid mix ups. Back in the day it's not uncommon to see signs advertising a business on the 3rd floor of a building, for example, to have 3 樓 2字 (3rd floor, number 2) to tell people they're on the 3rd floor but you need the press the 2 button in the lift. Also some (most? all?) skip the 4th floor for bad luck.

load more comments (3 replies)
[–] tobogganablaze@lemmus.org 14 points 1 month ago (1 children)

~~Arrays~~ Buildings start at zero.

load more comments (1 replies)
[–] esc27@lemmy.world 14 points 1 month ago (1 children)

I've worked in two U.S. buildings with Both ground and first floors. The buildings were built into a hill so street level entered the first floor, but parking entered the ground floor. Very easy to get confused until you figure it out.

load more comments (1 replies)
[–] sin_free_for_00_days@sopuli.xyz 13 points 1 month ago (11 children)

Do "2-story" homes in England actually have 3 floors?

[–] BigBootyBoy@sh.itjust.works 13 points 1 month ago (9 children)

We use the same thing in Australia as the British and if someone told me they have a 2 story home I would think ground floor and first floor

load more comments (9 replies)
load more comments (10 replies)
[–] OldWoodFrame@lemm.ee 13 points 1 month ago (2 children)

I feel like the British way should always be phrased like "first floor up" or "third floor up" because then you count starting at zero. American way should be phrased as "the first floor" or "the fourth floor."

load more comments (2 replies)
[–] ChickenLadyLovesLife@lemmy.world 11 points 1 month ago (5 children)

Don't forget the mezzanine. Super bon bon!

load more comments (5 replies)
[–] HK65@sopuli.xyz 11 points 1 month ago (12 children)

I did a quick search, it seems it's similar to imperial and metric in that it's only the US doing 1st floor as ground floor. It's for various reasons, but in most European languages the word used for the numbered "floors" either means "horizontal division between floors" or the first "construction over the previous floor", so it makes sense that the first is the first above the ground.

It's like the basement, the ground floor is special.

load more comments (12 replies)
[–] AllNewTypeFace@leminal.space 11 points 1 month ago (3 children)

It gets worse after the 12th floor where American buildings skip the 13th floor because it’s bad luck.

[–] TargaryenTKE@lemmy.world 12 points 1 month ago (3 children)

This probably used to be way more common, like when skyscrapers first became a thing, but I'm an American and was recently in an elevator that had the 13th floor button. It's definitely not a universal truth or like a building code violation or anything

load more comments (3 replies)
load more comments (2 replies)
[–] justme@lemmy.dbzer0.com 11 points 1 month ago (7 children)

More or less everybody except US and Russia has zero floor, counting in big office buildings is fun: 3,2,1,-1,-2, I know... The concept of a number zero is not that old (couple hundred years, don't remember the details), but should be enough to update your language :-*

[–] elucubra@sopuli.xyz 23 points 1 month ago (3 children)

0 is a couple of centuries old?!?!!!!?

You may want to check that one out, you may be missing a zero somewhere there...

load more comments (3 replies)
[–] Soggy@lemmy.world 17 points 1 month ago* (last edited 1 month ago)

We usually do B1, B2 etc. for "basement levels" rather than negative numbers. But if there's just one then it's usually "basement" with no number.

load more comments (5 replies)
[–] Moah@lemmy.blahaj.zone 11 points 1 month ago (2 children)

Wait until you reach the 13th floor

load more comments (2 replies)
[–] GissaMittJobb@lemmy.ml 10 points 1 month ago (1 children)

Zero-indexed versus one-indexed. You all know which is the right one

load more comments (1 replies)
[–] disguy_ovahea@lemmy.world 10 points 1 month ago
[–] MonkderVierte@lemmy.ml 10 points 1 month ago (1 children)
load more comments (1 replies)
[–] lemto@sopuli.xyz 9 points 1 month ago (1 children)

This is surprisingly annoying where I live and some houses use the British way and everyone uses the American way in speech.

We live on the American second floor. So whenever someone new comes to visit there is no easy answer to where our apartment is: if I tell them we are on the first floor, they won’t find us looking on the ground floor. If I say come to the second floor, they may use the elevator and press 2 which will then take them to the third floor.

Happens almost every time I’m not specific enough.

load more comments (1 replies)
load more comments
view more: next ›