3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
The official marlin-based firmware also "only" goes up to something like 200mm/s and 3000mm/s^2 for my model, but I've flashed klipper on it which has given me more control so I wasn't constrained by the limitations set by the manufacturer in the firmware.
I was able to push it to 500mm/s print speed and 11000mm/s^2 accelerations, but small details started to suffer and I was getting too much ringing. For simple large prints I still use it though if I need a quick-ish prototype.
Surely that wasn't with the stock hot end though. I've done 400 mm/s at 12k mm/s² but I only achieved enough flow after upgrading to a KE style hot end Proof
Using a V6 style hot end with 0.2MM brass CHT nozzle. According to the flow test method CNC kitchen uses I max out around 54mm^3/s @220°C. I can only print that fast on larger prints though because my cooling can't keep up on small prints.
Figured as much 😜