Grippler

joined 1 year ago
[–] Grippler@feddit.dk 1 points 10 minutes ago* (last edited 2 minutes ago)

If you live in a high energy cost area the ROI on going SSD can be as low as 3-4 years

~$800 on two 8tb SSDs

2 x 8tb HDDs is roughly $200USD

I don't know what kind of electricity prices you're paying, but to hit a 3 year ROI on your SSDs, you're paying at least $2.2USD/kWh, assuming the full 15W (232kWh/year total) consumption of the HDDs and assuming negligible power consumption from the SSDs.

[–] Grippler@feddit.dk 11 points 1 week ago* (last edited 1 week ago) (1 children)

It's also the most unlikely explanation of all, that phones brought in communicated with the ones in custody to reboot them. Even if it was a security feature to reboot phones under certain conditions, which is very likely TBH graphene OS does this, the best implementation isn't going to be relying on other phones randomly passing near by, it's going to be self-managed by the phone that reboots.

[–] Grippler@feddit.dk 1 points 3 weeks ago (1 children)

IMO battery life is absolutely excellent, I brought it with me on a 2 week holiday last year, read for 30-90min almost every night and didn't need to charge it during the trip or worry about battery life.

[–] Grippler@feddit.dk -2 points 3 weeks ago

If i haven't specifically agreed to, or asked for, promotional content I consider it unsolicited.

[–] Grippler@feddit.dk -2 points 3 weeks ago (2 children)

Unsolicited Ads are poison. I don't give two shits who's behind them, if you spew that shit in people faces, fuck you.

[–] Grippler@feddit.dk 7 points 3 weeks ago* (last edited 3 weeks ago) (5 children)

I'm using a Boox Leaf 2 myself, it's basically just an android tablet with an eink screen. I can load pretty much any eBook format, and you can put regular android apps from play store (or any other app store) on it as well if you want. And they have a microSD card slot available from the outside to expand storage.

All the hacks and mods people do to their kobo are not needed, because it's supported by default on my Leaf 2.

[–] Grippler@feddit.dk -4 points 3 weeks ago (5 children)

So it is actually just an advertisement...yuck 🤮

[–] Grippler@feddit.dk 21 points 1 month ago* (last edited 1 month ago)

I tried blocking anything Amazon in my adguard home instance...holy shit that broke a lot of sites, I had to unblock it to have functional internet.

[–] Grippler@feddit.dk 11 points 2 months ago

Because the EU is a diverse group of different interests, and while some intend to do good some are also fucking psychopaths.

 

Haven't really used a mocha pot before, so I'm experimenting a little to find the right grind settings and ratios for my taste. Normally brew espresso on a flair classic. Went with this more modern design from bialetti because it also works on induction stoves.

1
submitted 4 months ago* (last edited 4 months ago) by Grippler@feddit.dk to c/foto@feddit.dk
 

BBQ drumsticks på grillen m. kartoffelsalat og gnavegrønt når nu solen endelig skinner igen

25
submitted 8 months ago* (last edited 8 months ago) by Grippler@feddit.dk to c/3dprinting@lemmy.world
 

Is there a slicer that let's you configure sections of the model to print at a different layer height?

I often have some larger models I'm printing, and 0.3mm layers are just fine for this to speed things up, but some of the overhangs print very poorly with thick layers and require thinner layers to print well.

17
submitted 9 months ago* (last edited 9 months ago) by Grippler@feddit.dk to c/3dprinting@lemmy.world
 

I recently made the switch from the marlin-based stock firmware on my anycubic kobra 2, to klipper. I didn't have issues with bed levelling or first layer on the stock firmware, but I'm having significant issues running klipper. The bed is uneven, the probed mesh shows a deviation of 0.197mm, it was the same when running stock FW+octoprint.

But it seemed to be correcting just fine for this on the stock FW. I got a consistent decent first layer across the entire bed.

With klipper, it's absolutely impossible to get it to correct for this unevenness. Half the bed will get perfect first layer, but then the second half is either way too squished or hardly connecting to the bed. And it's causing further issues as it's also hitting the print when moving, despite having Z-hop of 0.3mm for travel moves.

What the hell is going on? How do I fix this?

22
submitted 9 months ago* (last edited 9 months ago) by Grippler@feddit.dk to c/3dprinting@lemmy.world
 

I have this incredibly loud noise coming from my Y-axis. It doesn't affect print quality, but it is horrible to listen to and really loud. It is present when the Y-axis moves at ~100mm/s and gets worse/louder as speed increases.

How can I mitigate this? There doesn't seem to be any mechanical issues when I move the bed by hand, it is smooth and easy to move.

view more: next ›