3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
I've got a long shot, but I saw a similar post a while back where someone was having extrusion issues on specific parts of the bed. After everyone was digging through diagnosing the gcode, extruder, hotend etc, ended up that the bowden tube was getting bent/stuck at certain positions and was keeping the filament from flowing properly.
IIRC, your printers cables running to the nozzle come from the left side.. are they maybe getting caught on something as the nozzle moves to the right? Or anything else that could cause your print head/ sensor to get pulled or pushed while on that side of the printer?
I saw in a comment you'd mentioned some bolts had come loose - check the bolts holding your z-axes bolts and make sure they aren't loose too. Have you tried calibrating bed tilt? (I don't have dual z so don't know much about this but do know it's a potential problem)
Hope you get it figured out!