this post was submitted on 17 Feb 2024
138 points (94.2% liked)

3DPrinting

15534 readers
134 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
 

https://www.printables.com/model/759734-oreck-vacuum-tube-extension#preview

Replacement tubes are only about $15 but why spend that when I can just print them!

you are viewing a single comment's thread
view the rest of the comments
[–] Thorry84@feddit.nl 5 points 8 months ago* (last edited 8 months ago)

Yes normally the tube gets inserted into another tube, which is the stuck into another tube or a foot. This leaves a large moment force directly where the tube is pushed into the other tube. Most likely even with careful use, this tube will break very quickly. The layer joint is the weak spot and the type of plastic most likely isn't ideal.

Vacuum cleaner parts are made from a high impact plastic, something that's tough but a bit on the softer side. This way it can take a beating without breaking into a million pieces.

3D printing this is cool and impressive to pull off such a high and narrow print. But practically speaking it makes no sense.