xan1242

joined 1 year ago
[–] xan1242@lemmy.ml 5 points 8 months ago (1 children)

Hey Shadow, what do you think of this guy's cock?

[–] xan1242@lemmy.ml 11 points 8 months ago

I should've clarified I did that on my email provider lol

Eh, works either way.

[–] xan1242@lemmy.ml 13 points 8 months ago (1 children)

I shall yoink that, thank you very much.

[–] xan1242@lemmy.ml 45 points 8 months ago (4 children)

I reported it as spam.

[–] xan1242@lemmy.ml 7 points 8 months ago

delete this

i tried to sleep and now i can't, thanks lmao

[–] xan1242@lemmy.ml 1 points 8 months ago

I honestly vastly prefer using IDA and Windows specific tools (x64dbg) over gdb. IDA can interface with gdb so it can act as a frontend which can be handy for visualization.

[–] xan1242@lemmy.ml 2 points 8 months ago

I have the same issue on one of the controllers.

There are some hall effect sensor kits on Aliexpress but that requires extensive work to set up and install.

[–] xan1242@lemmy.ml 1 points 9 months ago

Not a bad idea actually, totally didn't think about that.

[–] xan1242@lemmy.ml 1 points 9 months ago

Maybe even a PCIe pass through to a VM could do the trick if you're desparate lol (with Linux living in a separate drive)

Orrrr maybe even try FreeBSD... (or mac OS, but eww gross don't test that)

[–] xan1242@lemmy.ml 3 points 9 months ago (5 children)

The only thing I can think of is to try the drives in a different system and see how they behave (same OS and configuration).

If they behave the same then that rules out everything except the drives themselves and the OS.

Considering how you mentioned the behavior is better in Windows, it sounds like a software issue, but you never know until you try.

[–] xan1242@lemmy.ml 2 points 9 months ago* (last edited 9 months ago)

FWIW I've also had memory issues with XMP.

Turns out that ASUS firmware is omega pepega and decided to go against AMD's specifications even for XMP profiles.

CLDO VDDP was stuck at the same voltage as SOC. Per AMD it has to be up to VSOC - 0.1V

So, after manually setting that, and other VDDP and VDDG voltages, it magically started working perfectly.

So do check voltages anyway even if you found a bad stick. Mine endured through the crappy firmware thanks to it being Samsung B-die.

Also check this for more info in general (I recommend this even if you won't OC, just the memtest alone is a huge section)

https://github.com/integralfx/MemTestHelper/blob/oc-guide/DDR4%20OC%20Guide.md

I tested with OCCT to find even more errors, so either do that in a mini windows environment or do one of the Linux tests to check memory some more. Memtest86+ isn't enough.

[–] xan1242@lemmy.ml 6 points 9 months ago

I remember way back, around 2013, asking Gigabyte Mobile for the kernel source of one of their devices (Mika M3) via their business support.

Needless to say, they obliged! They uploaded it and then gave a link to an FTP server and credentials to use it.

So sometimes it's just worth asking.

I couldn't compile it fwiw, because it was missing key Mediatek components, but eh, what can you do...

 

(I apologize in advance if I may break any rules with this post.)

I feel obliged to share my awful experience with my attempt to contribute to PCSX2 after trying to submit patches.

Link to my pull request (archived)

TLDR; I got disrespected for my hard work by refractionpcsx2 and I decided to pack up my work and leave from contributing to PCSX2. And this isn't the first time it had happened...

Notes

Basically, let's just start with what had happened in notes:

  • I make a PR for a no interlace patch for Gran Turismo 3 NTSC-J, translated from code from asasega on the PCSX2 forum

  • A friend of mine also submits his for the PAL version, ends up not working, so I push that out too

  • A couple of contributors point out that the joker command doesn't work on the PAL version, so I disable them

  • In the meantime, I started working on a completely new code, which properly increases the resolution. I described as such in the comments.

  • This took about a week to work on and get a (as much as possible) properly working patch on NTSC-U and J versions.

  • I clearly comment on each new state and update the situation within the PR itself and state that PAL version still needs work (and I was working on it at the time)

  • Someone suggests to get help at the forums, but I decline as I had already tested with a few other people myself privately. I also suggest I can now remove the "experimental" wording out of the description (which was in the description of the patch itself at the time)

  • refractionpcsx2 comes along and decides to collectively call the patches broken "regardless of your wording", when I clearly stated they're not, with the exception of the PAL version that is currently being worked on

  • I reiterate and say that PAL is being worked on and emphasize, quote "And you would've known it's not broken if you tried the patch for yourself" (as I was referring to the NTSC patches). I also point out that they'd be losing out on a good patch if it doesn't get merged.

  • refractionpcsx2 decides to twist my words and says, quote, "And saying "" you'd never had known it was broken if you'd not tried it* isn't exactly instilling me with confidence in what you're submitting."

  • Feeling very patronized, I asked what's the exact problem, pointed out that he can wait before merging

  • After a bit of contemplation, I felt demotivated and closed my PR

  • refractionpcsx2 decides to accuse me of "trying to sneak in "experimental" patches" and belittle further

  • I leave a final comment, pointing out my exact grievances with him and revoking the right of them using my codes and state that I won't contribute any longer

  • refractionpcsx2 tells me "good riddance" and decides to block me from the entire PCSX2 organization

That's what had happened. I felt extremely disrespected for my hard work and I decided to pack up and leave.

I had even asked multiple times for these patches to be tested, but apparently that was heresy according to them.

What I had done wrong

  • I could've opened a draft instead of a PR (or converted this one into a draft)

  • I could've worked on this aside and make a PR later

  • I could've simply removed the PAL patches and just merged NTSC ones

Sure, those are the things I could've and probably should've done.

But another mistake was expecting my notes to be properly read with comprehension by the maintainer(s)...

What they had done wrong

  • Instead of pointing out my mistakes, refractionpcsx2 decided to immediately disrespect me and my work. (This was very demotivating.)

  • Refusing to listen to my explanations or read anything I had written before

  • Refusing to explain what I did wrong and point me in the right direction in a timely matter

  • Being petty, blocking me and my access to the PCSX2 organization over this

If certain things and/or rules are expected from contributors - write them down in a code of conduct or guidelines. PCSX2 does NOT have that anywhere.

Instead of cooperating with their contributors to help them build new things, they fully expect everything served to them finished and fully working (to perfection).

I'm not complaining about my PAL code not being accepted. That isn't the problem at all. I was willing to work on it more and finish it.

What can the PCSX2 team do differently?

  • This kind of behavior needs to be put to an end and in check

  • Show some respect for your contributors and the time they spend on/for your project

  • If they make a mistake contributing, point it out to them and point them in the right direction

  • Write down guidelines and your contribution expectations somewhere so people can know exactly what to expect. If you absolutely refuse to do any testing whatsoever yourselves, then say so.

  • And last, but not least, COOPERATE with your contributors so that they can bring a new feature or a bugfix easier to your project. (Another example of what was done wrong.)

Closing words

Was it wrong of me to expect basic social skills and decency throughout this?

I honestly wanted to help and fix a few bugs in PCSX2, perhaps introduce more patches for games in the future.

But with behavior like this, they're alienating people who could genuinely help.

I don't feel proud, at all, that I had to pull out like this. It feels petty looking from the outside, I know. But trust me, after a week of work, then being spit in your face and disrespected, you'd feel the same way. It's very frustrating.

I don't have anything against the rest of the PCSX2 team and I hope we can resolve this matter.

Again I apologize once more for the darker/harsher tone here, but it is what it is.

view more: next ›