That was good, tnx
BlastboomStrice
Hey, I had seen that meme around here some weeks ago, but I lost it and was searching it recently. Thank you, gonna share it with my friend now:)
Kinda wondering if you'd get different results for using a different display (especially of different technology)
This what I got from two consecutive tests anyways (weird that the percentage is different)
Your boundary is at hue 168, greener than 81% of the population. For you, turquoise is blue.
Your boundary is at hue 168, greener than 85% of the population. For you, turquoise is blue.
I don't exactly understand your comment (did you mean to type "can" or "much" instead?), but either way I didnt find its gameplay limited. It had lots of stuff to try.😅 I just didnt have enough time to play it.
PS. Do you know if you can become a multi-cellular organism in the game?
Wait, you can actually evolve out of the water amd become multicellular? Lol, I've played it so little that I've only gotten to have a few organelles
I think from the tests I did here with 2 people (from different instances) the downvotes are from any instance that federates with mine (though still not 100% sure).
I asked above to downvote me from their non-mander.xyz instance and I can see 2 downvotes.
[The guide isn't mine and I'm not affiliated with it, I'm just sharing a mind-blown moment for me.]
Over the years, I have gathered many notebooks that admittedly not all contain very important information and take up a lot of space (possibly a cubic meter or more). But being kind of a (data)hoarder, I dont want to just throw them away. It's work that took years.
My solution: scanning them. My phone has a built-in camera scanner that does a suprisingly good job (it helps that the camera is kinda good too), so I have scanned thousands of pages so far. But the process is slow and takes a lot of manual labor (flipping pages, aligning pages, retaking bad photos, creating pds etc.). A typical notebook (~120pages) may take me 15minutes or more.
So I thought that maybe I could speed up the process (partially at least) by either buying a scanner or paying someone to scan them (I don't have a proper scanner, yet). Removing the pages without damaging them is a challenge though. That's where the guide in the link comes in: it turns out it's very easy to remove the spiral spring from the notebooks! I was gonna pull the pages until I found that guide. I suppose it's also very easy to remove the staples from staple-bound notebooks too. I might just have "won" many hours of my life with this idea.
The video in the guide that helped me:
https://www.youtube.com/watch?v=lfMUVpwLZGM
(For the record, my xiaomi 10 phone can scan items by creating ~20MP images which translates to typical-to-high resolutions if I scan A4 or A5 pages. Fortunately, many scanners can reach that quality. I just need them not to apply any weird effects or compression to the scanned document.)
Yesterday, after this conversation with Wild Bill, we concluded that Deemix can't download songs from spotify playlists. It does recognize the songs in the playlists, but somehow it fails to download them and reports cannot read properties of undefined (reading 'flac')
(on Bill's pc it only reports cannot read properties of undefined
). If you hover the cursor over the error, a tooltip comes up with more info:
TypeError Cannot read properties of undefined (reading 'flac')
at f (C:\Program Files\deemix-gui\resources\app.asar\server\dist\app.js:2:94278)
at z (C:\Program Files\deemix-gui\resources\app.asar\server\dist\app.js:2:94979)
at process.processTicks.AndRejections (node:internal/process/task_queues:96:5)
at async Downloader.download (C:\Program Files\deemix-gui\resources\app.asar\server\dist\app.js:2:97603)
at async Downloader.downloadWrapper (C:\Program Files\deemix-gui\resources\app.asar\server\dist\app.js:2:102154)
at async C:\Program Files\deemix-gui\resources\app.asar\server\dist\app.js:2:96320
You can't just paste the spotify playlists link in the search bar and download the playlist.
Apparently, Spotify or Deezer or somethibg else changed their api or something and is giving Deemix a hard time.
Notes:
-
It worked for me about half a year ago (I have downloaded around 3k songs that way).
-
I can download individual songs from spotify with their link.
-
The tracking parameter spotify adds in the end doesnt seem to play any role, as the playlists dont get downloaded whether I remove the parameter or not and individual songs get downloaded whether I remove the parameter or not.
-
I tried creating a new "app" in spotify developer dashboard and use its iIDs, but it didnt help.
-
I also tried adding the "Web Playback SDK" kit in the spotify app, but it didnt help (I have the "Web API" on at all times btw). Spotify shows in the dashboard that I have indeed made calls to their api by downloding songs.
-
I'm using the latest deemix-gui version (I think):
2022.12.14-r222.5d447b6035
. -
I'm using it on windows 10.
-
If you want to see my settings, it's under the Deemix settings section in this guide I made https://mander.xyz/post/13720820
-
I use a hifi account (from a random arl). I also tried another account, still didnt help.
-
The same issue occurs when downloading mp3, not just flac
-
I tried downloading playlists which deemix had successfully downloaded in the past, it failed. I even tried creating new playlists for deemix to download, it failed again.
I tried searching the error online, ~nothing related to deemix came up. This is the deemix gitlab repository, in case it helps anyone with finding more info.
Plz halp.
So my main language is Greek and I read english and greek books. Depending on the book/author I may have 2-5 words per page that I may not understand (or at least I want to understand them better). Thus, many times after I finish a page, I use aard2 and either search the word in the english-to-english dictionary or (rarer) in the greek wiktionary for a translation. (For context, I'm reading ~mainly fantasy, sci-fi or dystopian books of the 20th and 21th century and currently I'm on "Croocked kingdom". I haven't dared to try reading a classic book in english.)
The issue is that this effectively slows me down by an extra ~50% time per page and I'm not even very sure that those words are remembered. I could simply keep reading without searching the words up and just use the context to get a vague sense of their meaning (or simply ignore them as they ~usually aren't necessary to the plot), but I think I'd miss on the whole experience by doing this and it doesn't address the underlying issue (being that I don't know english extremely well even if I have C2 and scored high on vocabulary), which will perpetuate the problem. I'd like to note that I have made searching words almost as efficient as it gets by using downloaded dictionaries, so I don't think I can reduce the time I spend looking up words by anything more, at least on paper books.
I'd like to ask anyone who searches up words like me:
Did you eventually reach a point where you learnt enough words this way, that it wasn't that much necessary to use dictionaries anymore? (I'd be kinda satisfied if I could reduce the frequnecy of unknown words to 1 per two pages or something.)
Go to your uploads on your profile and delete anything you don't want. Very helpful in case you upload anything sentitive by mistake (I remember an issue on github about this).
![](https://mander.xyz/pictrs/image/bdf3686b-5e84-4faa-8052-2d47e0ca0ea7.jpeg)
Happens about 20mins after I wake up.
Image transcription:
Random npc spongebob fish character looking miserable holding a cup during a sunset and another overlayed image of the same guy on the left with the same look.
It is captioned with:
When you already checked your usual 5 apps and don't know what else to do with your day:
![](https://mander.xyz/pictrs/image/aad5dc91-3dc0-4cc1-b78e-1da9bdf287fa.jpeg)
After all these recent upgrades, updates and improvements, things are going veeert smoothly and fast!🔥 I think this comment I made about a week ago about experiencing slow responses is no longer valid!
Sal and anyone else who helped, you did a great job! Thank you!☺️
Hello people
Im trying to find music that aligns with my views and opinions, so that I can listen to it guilt-free and simply enjoy it. I have some prerequisites/requirements and some preferences. I want to ask you if you can share any artist/band (or songs if you dont know any artists) that matches all the prerequisites and if possible any of the preferences.
The prerequisites about the artists(/songs):
-
They have leftist (and anti-capitalist) opinions
-
They have feminist (and anti-patriarchist) opinions
-
They are friendly towards all the queer community (including non-binary and trans people)
-
They have atheistic/agnostic opinions
-
They have anti-racist opinions (I forgot to add this, I took it as granted, provided all the previous requirements were passed😅. I'm editing my post to add it.)
The preferences about the artists(/songs):
a) They dont promote self-destructive behaviours (like substance/alcohol abuse). I dont have any issue with them singing about such behaviours, but I want to see them trying to help people get out of this situation. (This one could be a prerequisite too, but then there would almost no artist that would pass my requirements..)
b) They express their opinions in the songs by singing about social issues and such
c) Their genre is rap/metal/rock (generally I tend to prefer songs that have some anger/that are powerful)
d) They sing mainly in either English or Greek (the languages I know well so that I can understand them😅). I also know some German, so that could be a good option too. And I'd like to learn Spanish some time. (If you know artists/songs that sing in other languages, you're welcome to share them)
Please, I would like anything you share to pass my prerequisites and to mention any of my preferences that it matches (in case it doesn't pass any of the prerequistes at least mention it). I have them all in order to make it easier for you.
So for example, the band "Rationalistas" (a greek rap band) passes the prerequistes and seems to match b), c) and d) preferences (I listen to them almost exclusively this week, lol).
Another artist that seem pass my requirements seems to be Macklemore (as seen on "Hinds hall") and matches c) and d) of my preferences (and in some songs I think he matches a) and b) too).
Demi Lovato in her HOLY FVCK album seems to pass my requirements (though not sure about the 1.) and probably matches all of my preferences.
Jesse Welles seems to pass my requirements as well and matches at least b) and d) of my preferences.
Lemmy seems to opinions similar to what my requirements are, so I kinda hope I might get good recommendations here.
(For even greater coverage, I've cross-posted this on the ~equally active music community on hexbear https://mander.xyz/post/14452658. Sharing the link in case you want to find extra material, I might combine all the recommendations eventually in a list or a playlist.)
Here I'm gonna list ~anything you and I suggest:
List of artists/bands (and album/song picks)
Against Me! (Their politics have become a bit more "softer" over time, but were left-anarchists at first. Feminist and the singer is a trans woman. Picks:"Reinventing Axl Rose" and "As the Eternal Cowboy")
AJJ (Andrew Jackson Jihad) (Folk punk.)
Bad Religion (Punk/Rock.)
Bands that publish under libre/free licences, they are often leftist, feminist and they are political by design.
Billy Bragg (Folk/Rock/Protest. Left wing. Picks: "Red flag")
Bloc Party (Indie Rock)
Bomb the Music Industry! (Lefty ska-punk.)
Circus Marcus (Piano/Emotional music.)
Crass (Anarcho Punk. The logo was designed to look "fascist" to draw in youth that, at the time, were drawn to fascism through the iconography. The hope was to expose these fascist at risk youth to Crass' version of radical politics involving anti-racism, anti-sexism, anarchist socialism. Picks: "Best before 1984")
Dad Bods (Rock. Their youtube page because it's hard to find them: https://www.youtube.com/@dadbods1328 Picks: "System")
Danger Dan - (German Rap. Unfortunately Antideutsche. Picks: "Sand in die Augen")
David Rovics (Folk/Ballads. Picks: "Who Would Jesus Bomb")
Dead Prez (Rap.)
Defiance (Folk punk.)
DJ Spooky (Electronic/Hip-Hop.)
eta (Punk Rock/Grunge. Their discogs page because it's hard to find them: https://www.discogs.com/artist/7205-ETA)
G.L.O.S.S. (Anti-capitalist, anti-fascist punk rock made by trans women.)
Godspeed You! Black Emperor (Post Rock.)
grandson (Rap/Rock Picks: "Blood in the water")
grim104 (German Rap. Picks: "2. Mai")
https://music.youtube.com/playlist?list=PLKByGkH3_rqBVE7gvYaL3rQQDWOKbUcuL (Very angry anti-fascist Youtube playlist. Mostly metal and rap. The artist themselves may not all be leftist but I picked songs that work. Immortal Technique don't pass the feminism and queer friendliness requirements. The songs in the playlist should be unoffensive on that front though. Used when the only way to get through the day is with pure rage at the injustice of the world.)
IDLES (Punk Rock. Picks: "Samaritans:")
Irie Revoltes (German Punk/Reggae/Hip-Hop)
Johnny Hobo & the Freight Trains, Wingnut Dishwashers Union (Projects from Pat the Bunny. Folk punk. A lot of his music deals with substance abuse but not in a glamorizing way. They mark his stages of recovery in a way that is very interesting.)
K.I.Z. (German Hip-Hop. Warning: Wikipedia says "Characteristic for the group are sexist, provocative lyrics containing black humour, irony, sarcasm and cynicism." I don't know enough German to tell how "ok" are their lyrics. Yet they were recommended to me, so I put them in the list. Picks: "Görlitzer Park")
Krav Boca (French/Greek Rap.)
Laibach (Industrial.)
Lupe Fiasco (Leftist Rapper. Picks: "Mural" and "American Terrorist")
Michael Franti and Spearhead (Hip-Hop/Reggae.)
Modest Mouse (Their real strengths come out in their more reflective songs. Picks: "Lonesome Crowded West")
NT (Picks: https://ntband.bandcamp.com/album/present-recover-past)
Ohio (Folk punk.)
Osiris Saline (Classical/Gothic/Symphonic/Progressive Punk)
Pablo Hasel (Catalan Rapper)
Plagiat (French Rock. Songs in some kind of bizarre French. Their bandcamp page because it's hard to find them: https://plagiatbros.bandcamp.com/)
Propagandhi (Conventional punk. Picks: "Less Talk, More Rock")
Punk bands. folk punk.Try checking out smaller punk bands on Bandcamp.
Rage Against the Machine (Rap/Metal/Rock)
Refused (Swedish Hardcore band with leftist themed music. Their singer Dennis Lyxzén is an outspoken socialist and vegan. They broke up for about 15 years after TSoPtC, but reunited and have been releasing new albums and playing shows since 2015. Picks: "The Shape of Punk to Come"
Rise Against (Melodic Hardcore/Punk Rock. Picks: "Make it stop(September children)"
Sebkha-Chott (French Metal/Jazz/Fusion. Old band from Plagiat members.)
Stray From The Path (Hardcore Punk. Picks: "Goodnight Alt Right", "Guillotine" and "Euthanasia".)
Streetlight Manifesto (Lefty ska-punk.)
System of a Down (Nu Metal. You probably know them already.)
The Clash (OG Leftist Punk.)
The Residents (Art Rock.)
The Warning (Rock. Band comprised of 3 Mexican women.)
Ton Steine Scherben (Oldschool German Rock)
Utah Philips (Folk music.)
Vandalismus (German Rap. Picks: "Maskulina")
Zugezogen Maskulin (German Rap. Picks: "Alle gegen Alle")
spoiler List of unreviewed Artists/Bands that I don't know if they pass my prerequisites, using suggestions from this comment thread https://mander.xyz/post/14380057/11458375 Ashenspire
boundries
Brkovi (Balkan Punk.)
Chat Pile
Clarion Knell (Marxist band)
crust
Destrage (Italian metalcore band)
Dubioza Kolektiv(Balkan Punk.)
dying (pro-palestine before it was cool)
Feminazgul (RABM (Red/Anarchist Black Metal) band)
foreign hands
Incendiary
Iskra (RABM (Red/Anarchist Black Metal)
king gizzard and the lizard wizard
kittie
Knocked Loose (Metalcore band)
Kultur Shock (Balkan Punk.)
Maximum the Hormone
Misery Index
nothingface
Panopticon
Protest the Hero
Realm and Ritual (RABM/Dungeon Synth tape label)
S.A.R.S (Balkan Punk.)
Sankara (Marxist band)
seeyouspacecowboy
sepultura
soulfly
stick to your guns (melodic heavy hardcore)
unearth (anti-fascist, eco-anarchist, closer to traditional metal then metalcore)
Wolves in the Throne Room (not political but spoke out against fascists)
Yellow Eyes (not political but spoke out against fascists) :::
Hello everyone!
About 2 weeks ago, kbin.social went down due to maintenance issues, but it seems like federation hasn't been restored on this instance.
Specifically, I am subscribed to https://kbin.social/m/greece which federates with lemmy.world, but on this instance posts since 2 weeks ago and later dont seem to be federating.
Could you please check it and maybe re-enable it in the future?
(I know that currently there's a migration happening and we'll soon(?) update to 0.19.4, so this issue I'm pointing may have to wait till all these finish first (or updating may fix it without any extra work)).
Thank you for maintaining this instance! :)
[Original date of post creation: 2024-06-02]
Hello everyone!
For a long time, I wanted to write a guide with my process of donwloading and tagging songs (I can use it as a guide for me in case I forget it, haha). Anything here is a suggestion, you can do it differently if you want. (This guide is for windows (10) devices, linux tools may be different. I haven't moved to Linux, yet..) This is gonna be long.
Tools we may need:
(online means that they don't have to be installed)
-- Deemix to download songs from deezer (open source).
-- Soulseek platfrom to share music. There is an android open source client SeekerAndroid and a PC open source client Nicotine+.
-- TuneMyMusic website to create/edit/import/export playlists to/from/in various music platfrom (online). It can also export in text.
-- ytDownloader to download songs from Youtube (for PC, open source). It can also download videos/songs from many other sources, acts as a gui for yt-dpl.
-- Seal to download songs from Youtube (for android, open source). It can also download videos/songs from many other sources, acts as a gui for yt-dpl.
-- Mp3tag (for Linux you can use puddletag, but I can't help you with that as of now) to manually (and batch) edit tags of my downloaded songs (closed source freeware, until recently I thought it was open source.. I might replace it with Kid3 if I ever get to know how to use it). Mp3tag has "actions" which help you do batch edit of metadata, like format the filename of a song using the artist and title tags (and with ctrl+a you can select all songs to apply that action).
-- OneTagger to automatically tag songs (open source). It can fetch metadata from various platforms, like musicbrainz, deeer, spotify, musixmatch, bandcamp, discogs etc.
-- LyricsGenius python program to fetch data from genius using genius api (open source).
-- lrcget to batch fetch lyrics from lrclib (open source).
-- lrclib website with synced and unsynced lyrics (online).
-- Genius website with unsynced lyrics, song metadata and lyrics interpretations (online).
-- Notepad++ to edit text (open source).
-- fre:ac to convert my files from .flac to .opus (open source). It can do many more, it can also rip CDs etc.
-- Quodlibet windows/linux/macos music player (open source). Very good.
-- Symphony android music player (open source). Very good.
-- ListenBrainz to record my listening history (open source, online). It has an offcial open source android client too. Many music players (on pc at least) have plug-ins that support ListenBrainz.
-- Noteable mentions: Simplest file renamer to batch rename files or get a list of the filenames in a folder (open source) and Libre Office to use the Office calc funtions (open source).
The download part:
I will be using Deemix as my primary source, Soulseek for anything else and Youtube when I can't find my song anywhere else.
Deemix needs an account, so you can probably find a ARL here (arl is like a token for an account). If the link doesn't work in the future, you'll have to find it yourself. Soulseek simply needs a free account (but there it is encouraged to share your music with others).
In Deemix you can search songs seperately or download playlists (either from deemix or spotify). You can create spotify playlists from various sources (even text list) with TuneMyMusic.
Deemix settings:
-- Use this trackname template in all occasions:
%artist% - %title% [%year%]
-- Save covers at 1200 size in .png format
-- Save all tags apart from copyright
-- Set concurent downloads to 1, because it makes sure songs from playlists get downloaded with the same order in the playlist (it helps me check later what has been downloaded properly) and makes it harder to be detected.
-- Set it to download Flac
and set it to create .lrc files
-- Turn on Keep "Various artists" in the Album artists
-- Use YYYY-MM-DD
date format
-- Set it to remove "featured artists" from the title
-- Add your Spotify account with the proper tokens/credentials
Youtube: either use yt-dpl or ytDonloader (it has a gui)
The tagging part (the longest part):
Our main tools will be Mp3tag and OneTagger. OneTagger will fetch the tags and Mp3tag will edit them.
First, we will create our folder structure which we will use:
-- Create a folder 1T
.
-- Inside create 10 more: 0 Raw
, 1 Deezer
, 2 Spotify
, 3 Musicbrainz
, 4 Bandcamp
, 5 Musixmatch
, 6 Opus
, 7 Final
, Images
, Texts
.
-- Inside the 7 Final
folder create 2 more: Flac
and Opus
.
I will first describe how to set up OneTagger, Mp3tag and anything else and then I'll describe the steps.
OneTagger settings:
(!Attention!) I mention any changes from the default, anything else I'll probably not mention it.
Some terms explained before we start:
-- ReleaseID
is the part after the last /
of the deezer url of the album which the song belongs to. i.e. from this link https://www.deezer.com/en/album/5447741
the id is 5447741
.
-- TrackID
is the part after the last /
of the deezer url of the album which the song belongs to. If you download a song from Deemix, it usually has the TrackID saved in the SOURCEID
tag. i.e. from this link https://www.deezer.com/en/track/55848051
the id is 55848051
.
First we will create our AutoTag profiles:
1) Create new profile 1 Deezer
(This is for songs downloaded with Deemix, the 6th profile is the universal alternative.)
-- In platforms tab select Deezer
as platform
-- In tags tab, select Version
, Label
, ReleaseID
, Catalog Number
, Disc Number
, OneTagger Tags
. (Select album art only if you want to change the art or you haven't downloaded the songs from deemix). Select as input the path of the folder 0 Raw
.
-- In platform specific settings set Album Art resolution to 1600 (Redundant step)
-- In advanced turn on only ID3v2.4
, Identify tracks with Shazam
, Move successfully tagged files after taggins
and add the path of the 1 Deezer
folder underneath. In the overwrite tags area, add those tags: Version
, Label
, ReleaseID
, Catalog Number
, Disc Number
, OneTagger Tags
. Set track number leading zeros to 2 and use //
as separators.
2) Create new profile 2 Spotify
-- In platforms tab select Spotify
as platform
-- In tags tab, select Album Artist
, ReleaseID
, TrackID
, URL
. Select as input the path of the folder 1 Deezer
.
-- In platform specific settings put in your Spotify credentials
-- In advanced turn on only ID3v2.4
, Identify tracks with Shazam
, Move successfully tagged files after taggins
and add the path of the 2 Spotify
folder underneath. In the overwrite tags area, add those tags: Album Artist
, ReleaseID
, TrackID
, URL
. Set track number leading zeros to 2 and use //
as separators.
3) Create new profile 3 Musicbrainz
-- In platforms tab select Musicbrainz
as platform
-- In tags tab, select Genre
, ReleaseID
, TrackID
, URL
. Select as input the path of the folder 2 Spotify
.
-- In advanced turn on only ID3v2.4
, Identify tracks with Shazam
, Move successfully tagged files after taggins
and add the path of the 3 Musicbrainz
folder underneath. In the overwrite tags area, add those tags: Genre
, ReleaseID
, TrackID
, URL
. Set track number leading zeros to 2 and use //
as separators.
4) Create new profile 4 Bandcamp
-- In platforms tab select Bandcamp
as platform
-- In tags tab, select Genre
, Style/Subgenre
, ReleaseID
, TrackID
. Select as input the path of the folder 3 Musicbrainz
.
-- In advanced turn on only ID3v2.4
, Identify tracks with Shazam
, Move successfully tagged files after taggins
and add the path of the 4 Bandcamp
folder underneath. In the overwrite tags area, add those tags: Genre
, Style/Subgenre
, ReleaseID
, TrackID
. Set track number leading zeros to 2 and use //
as separators. In Genre/Style/Subgenre options select Merge to Genre tag
.
5) Create new profile 5 Musixmatch
-- In platforms tab select Musixmatch
as platform
-- In tags tab, select Unsynced Lyrics
, Synced Lyrics
. Select as input the path of the folder 4 Bandcamp
.
-- In advanced turn on only ID3v2.4
, Identify tracks with Shazam
, Write .LRC file
, Move successfully tagged files after taggins
and add the path of the 5 Musixmatch
folder underneath. In the overwrite tags area, add those tags: Unsynced Lyrics
, Synced Lyrics
. Set track number leading zeros to 2 and use //
as separators. In Genre/Style/Subgenre options select Merge to Genre tag
.
Extra/Secondary profiles to use when you don't tag songs downloaded from Deemix:
6) Create new profile 1 Deezer - Universal
-- In platforms tab select Deezer
as platform
-- In tags tab, select everything apart from Explicit
and Album Art
(select album art only if you want to change the art or you haven't downloaded the songs from deemix). Select as input the path of the folder 0 Raw
.
-- In platform specific settings set Album Art resolution to 1600 (Redundant step)
-- In advanced turn on only Overwrite tags
, ID3v2.4
, Identify tracks with Shazam
, Move successfully tagged files after taggins
and add the path of the 1 Deezer
folder underneath. Set track number leading zeros to 2 and use //
as separators.
7) Create new profile 2 Spotify - Universal
-- In platforms tab select Spotify
as platform
-- In tags tab, select Artist
, Album Artist
, ReleaseID
, TrackID
, ISRC
, URL
. Select as input the path of the folder 1 Deezer
.
-- In platform specific settings put in your Spotify credentials
-- In advanced turn on only ID3v2.4
, Identify tracks with Shazam
, Move successfully tagged files after taggins
and add the path of the 2 Spotify
folder underneath. In the overwrite tags area, add those tags: Artist
, ReleaseID
, TrackID
, ISRC
, URL
. Set track number leading zeros to 2 and use //
as separators.
8) Create new profile 3 Musicbrainz - Universal
-- In platforms tab select Musicbrainz
as platform
-- In tags tab, select Genre
, ReleaseID
, TrackID
, ISRC
, URL
. Select as input the path of the folder 2 Spotify
.
-- In advanced turn on only ID3v2.4
, Identify tracks with Shazam
, Move successfully tagged files after taggins
and add the path of the 3 Musicbrainz
folder underneath. In the overwrite tags area, add those tags: Genre
, ReleaseID
, TrackID
, ISRC
, URL
. Set track number leading zeros to 2 and use //
as separators.
These are all the profiles we will need.
Next we will set up the Audio Features tab:
-- Put in your spotify credentials and log in.
-- In the Select Input field put the path of the 5 Musixmatch
folder.
-- Leave properties as they are.
-- In separators section use //
as the separators.
-- In advanced section enable the Write OneTagger meta tag
and Include subfolders
. Disable the Skip already tagged tracks
.
And now OneTagger is set up.
Mp3tag setup:
1) First we will create an export configuration which we will use later:
-- Create a new configuration csv for py script (only artist and title)
, and edit it using this as the code:
$filename(titleartistlist.csv,utf-16)artist title
$loop(%_filename_ext%)$meta_sep(artist,$char(44) ) %title%
$loopend()
-- Set export filename to titleartistlist.csv
and add behind it the path of the Texts
folder we created before (we want the exported file to be inside the Texts folder)
2) Then we will create our actions:
(I will write the name and the steps needed to create each action)
1. wwwaudio to wwwaudiosource (Deezer) from Deemix
-- Create a format action type: set field to WWWAUDIOSOURCE
and format string to https://www.deezer.com/track/%sourceid%
2. wwwaudio to www (Spotify)
-- Create a format action type: set field to WWW
and format string to %wwwaudiofile%
3a. Format 1 rating
-- Create a format action type: set field to RATING
and format string to 20
-- Create a format action type: set field to RATING WMP
and format string to 1
3b. Format 1 rating
-- Create a format action type: set field to RATING
and format string to 40
-- Create a format action type: set field to RATING WMP
and format string to 64
3c. Format 1 rating
-- Create a format action type: set field to RATING
and format string to 60
-- Create a format action type: set field to RATING WMP
and format string to 128
3d. Format 1 rating
-- Create a format action type: set field to RATING
and format string to 80
-- Create a format action type: set field to RATING WMP
and format string to 192
3e. Format 1 rating
-- Create a format action type: set field to RATING
and format string to 100
-- Create a format action type: set field to RATING WMP
and format string to 255
4. Filename format artist - title [year]( -- [YT])
-- Create a format action type: set field to _FILENAME
and format string to $meta_sep(artist,; ) - %title% $char(91)$left(%year%,4)$char(93)$if($geql($strstr($meta_sep(genre,\\),$char(91)YT$char(93)),1), -- $char(91)YT$char(93),)
-- Note: $char(91) is [
and $char(93) is ]
4b. Filename format artist - title [year]( -- [YT])
-- Create a format action type: set field to _FILENAME
and format string to $meta_sep(artist,; ) - %title%$if($geql($strstr($meta_sep(genre,\\),$char(91)YT$char(93)),1), -- $char(91)YT$char(93),)
5. Add-Fix [Xstar(s)] genre
-- Create a format action type: set field to GENRE
and format string to $if($or($geql($strstr($meta_sep(genre,\\),$char(91)5stars$char(93)),1),$geql($strstr($meta_sep(genre,\\),$char(91)4stars$char(93)),1),$geql($strstr($meta_sep(genre,\\),$char(91)3stars$char(93)),1),$geql($strstr($meta_sep(genre,\\),$char(91)2stars$char(93)),1),$geql($strstr($meta_sep(genre,\\),$char(91)1star$char(93)),1),$geql($strstr($meta_sep(genre,\\),$char(91)0star$char(93)),1)),$replace($meta_sep(genre,\\\\),$char(91)5stars$char(93),$char(91)$div(%rating%,20)star$ifgreater(%rating%,20,s,)$char(93),$char(91)4stars$char(93),$char(91)$div(%rating%,20)star$ifgreater(%rating%,20,s,)$char(93),$char(91)3stars$char(93),$char(91)$div(%rating%,20)star$ifgreater(%rating%,20,s,)$char(93),$char(91)2stars$char(93),$char(91)$div(%rating%,20)star$ifgreater(%rating%,20,s,)$char(93),$char(91)1star$char(93),$char(91)$div(%rating%,20)star$ifgreater(%rating%,20,s,)$char(93),$char(91)0star$char(93),$char(91)$div(%rating%,20)star$ifgreater(%rating%,20,s,)$char(93)),$meta_sep(genre,\\\\)\\\\$char(91)$div(%rating%,20)star$ifgreater(%rating%,20,s,)$char(93))
6. Replace hiphoprap and Capitalise Genre
-- Create a replace action type: set field to GENRE
, original to Hip-hop-rap
and replace with Rap/Hip-Hop
-- Create a replace action type: set field to GENRE
, original to Rap/Hip Hop
and replace with Rap/Hip-Hop
-- Create a case conversion action type: set field to GENRE
, case conversion to Mixed Case
and words begin from/after any of ;/&[-
(the spacebar is not a typo)
7. Synced Lyrics from lrc
(this has a lot of steps because we use regular expressions to fix the line breaks)
-- Create an Import text file action type: set field to SYNCEDLYRICS
and filename %_filename%.lrc
-- Create a replace with regular expression action type: set field to SYNCEDLYRICS
, regular expression to \]\x20
, replace with \]
and don't use case-sensitive comparison
-- Create a replace with regular expression action type: set field to SYNCEDLYRICS
, regular expression to \]\x20
, replace with \]
and don't use case-sensitive comparison
-- Create a replace with regular expression action type: set field to SYNCEDLYRICS
, regular expression to (\]\r\n|\]\n)
, replace with \]\x{266A}\n
and don't use case-sensitive comparison
-- Create a replace with regular expression action type: set field to SYNCEDLYRICS
, regular expression to \r
, replace with `` (nothing, blank) and don't use case-sensitive comparison
-- Create a format action type: set field to SYNCEDLYRICS
and format string to $if($strcmp($right(%syncedlyrics%,1),$char(93)),%syncedlyrics%$char(9834),%syncedlyrics%)
-- Create a format action type: set field to SYNCEDLYRICS
and format string to $char(91)ti:%title%$char(93)$char(10)$char(91)ar:%artist%$char(93)$char(10)%syncedlyrics%
-- Create a format action type: set field to LYRICS
and format string to %syncedlyrics%
-- Create a replace with regular expression action type: set field to LYRICS
, regular expression to (\[\d\d\:\d\d.\d\d\]|\[\d\d\:\d\d.\d\d\d])
, replace with `` (nothing, blank) and don't use case-sensitive comparison
-- Create a format action type: set field to UNSYNCEDLYRICS
and format string to %lyrics%
8. Export artist and title for genius and backup year and cover
-- Create an export action type: pick the csv for py script (only artist and title)
we've created and set export filename to titleartistlist.csv
and add behind it the path of the Texts
folder we created before (we want the exported file to be inside the Texts folder)
-- Create a format action type: set field to DEEZER_YEAR
and format string to %year%
-- Create an export cover to file action and in the format string add the path to the Images\Old\%_filename%_Deezer
(from the Images
folder we've created). This will act as a backup of our images. Note that it adds the _Deezer name at the end of each filename, this may cause inaccuracies if we use songs that have images from different sources.
9. Merge, trim, and genius Year
-- Create a merge duplicate fields action type: set field to YEAR
and separator to \\
-- Create a replace action type: set field to GENIUS_YEAR
, original to None
and replace with 00
-- Create a replace with regular expression action type: set field to GENIUS_YEAR
, regular expression to (\d+)-(\d+)-(\d+)
, replace with $1-$if($eql($len($2),1),0$2,$2)-$if($eql($len($3),1),0$3,$3)
and don't use case-sensitive comparison
-- Create a format action type: set field to YEAR
and format string to $if($grtr($len(%year%),10),$cutLeft(%year%,6),%year%)
-- Create a format action type: set field to YEAR
and format string to $if($or($eql($left(%genius_year%,1),0),$and($strstr(%genius_year%,$char(45)00$char(45)00),$and($eql($len(%deezer_year%),10),$leql($if($less($sub($left(%genius_year%,4),$left(%deezer_year%,4)),0),$mul(-1,$sub($left(%genius_year%,4),$left(%deezer_year%,4))),$sub($left(%genius_year%,4),$left(%deezer_year%,4))),1)))),%deezer_year%,%genius_year%)
Genre adding [YT]
-- Create a format action type: set field to GENRE
and format string to $if($eql($strstr($meta_sep(genre,\\),$char(91)YT$char(93)),0),$meta_sep(genre,\\\\)\\\\$char(91)YT$char(93),$meta_sep(genre,\\\\))
Genre adding [Instrument@l]
-- Create a format action type: set field to GENRE
and format string to $if($eql($strstr($meta_sep(genre,\\),$char(91)Instrument$char(64)l$char(93)),0),$meta_sep(genre,\\\\)\\\\$char(91)Instrument$char(64)l$char(93),$meta_sep(genre,\\\\))
Genre adding [Gr33k]
-- Create a format action type: set field to GENRE
and format string to $if($eql($strstr($meta_sep(genre,\\),$char(91)Gr33k$char(93)),0),$meta_sep(genre,\\\\)\\\\$char(91)Gr33k$char(93),$meta_sep(genre,\\\\))
Genre adding [8b@ll]
-- Create a format action type: set field to GENRE
and format string to $if($eql($strstr($meta_sep(genre,\\),$char(91)8B$char(64)ll$char(93)),0),$meta_sep(genre,\\\\)\\\\$char(91)8B$char(64)ll$char(93),$meta_sep(genre,\\\\))
Genre adding [Nitr0]
-- Create a format action type: set field to GENRE
and format string to $if($eql($strstr($meta_sep(genre,\\),$char(91)Nitr0$char(93)),0),$meta_sep(genre,\\\\)\\\\$char(91)Nitr0$char(93),$meta_sep(genre,\\\\))
Genre adding [F@vourites]
-- Create a format action type: set field to GENRE
and format string to $if($eql($strstr($meta_sep(genre,\\),$char(91)F$char(64)vourites$char(93)),0),$meta_sep(genre,\\\\)\\\\$char(91)F$char(64)vourites$char(93),$meta_sep(genre,\\\\))
Remove favourite genre
-- Create a format action type: set field to GENRE
and format string to $if($eql($strstr($meta_sep(genre,\\),$char(91)F$char(64)vourites$char(93)),0),$meta_sep(genre,\\\\),$replace($meta_sep(genre,\\\\),$char(91)F$char(64)vourites$char(93),))
Source to Deezer
-- Create a format action type: set field to SOURCE
and format string to Deezer
wwwaudio to wwwaudiosource (Deezer)
-- Create a format action type: set field to WWWAUDIOSOURCE
and format string to %wwwaudiofile%
Merge and split tags
-- Create a merge duplicate fields action type: set field to ALBUMARTIST
and separator to \\
-- Create a replace action type: set field to ALBUMARTIST
, original to \\
and replace with ;
-- Create a merge duplicate fields action type: set field to ARTIST
and separator to \\
-- Create a replace action type: set field to ARTIST
, original to \\
and replace with ;
-- Create a merge duplicate fields action type: set field to GENRE
and separator to \\
-- Create a replace action type: set field to GENRE
, original to \\
and replace with ;
-- Create a merge duplicate fields action type: set field to PUBLISHER
and separator to \\
-- Create a replace action type: set field to PUBLISHER
, original to \\
and replace with ;
-- Create a merge duplicate fields action type: set field to AUTHOR
and separator to \\
-- Create a replace action type: set field to AUTHOR
, original to \\
and replace with ;
-- Create a merge duplicate fields action type: set field to COMPOSER
and separator to \\
-- Create a replace action type: set field to COMPOSER
, original to \\
and replace with ;
-- Create a merge duplicate fields action type: set field to AUDIO_FEATURES
and separator to \\
-- Create a replace action type: set field to AUDIO_FEATURES
, original to \\
and replace with ;
-- Create a merge duplicate fields action type: set field to LABEL
and separator to \\
-- Create a replace action type: set field to LABEL
, original to \\
and replace with ;
; to double inverted slash
-- Create a replace action type: set field to ARTIST
, original to ;
and replace with \\
-- Create a replace action type: set field to GENRE
, original to ;
and replace with \\
-- Create a replace action type: set field to ALBUMARTIST
, original to ;
and replace with \\
-- Create a replace action type: set field to AUDIO_FEATURES
, original to ;
and replace with \\
-- Create a replace action type: set field to PUBLISHER
, original to ;
and replace with \\
-- Create a replace action type: set field to LABEL
, original to ;
and replace with \\
-- Create a replace action type: set field to COMPOSER
, original to ;
and replace with \\
-- Create a replace action type: set field to AUTHOR
, original to ;
and replace with \\
And these were all the actions we needed!
3) Next we will create our python script that will fetch data from genius:
For this we first need to install the LyricsGenius program from github. Our script will use that program.
I'll just copy paste the code. Name it genius_data_fetcher.py
and saved it in the Texts
folder we've created.
This script takes a titleartistlist.csv
list we create and it creates a geniusdata.txt
file which contains the following items separated by tab: geniusID
, url
, genius song cover url
, genius song cover url
, arists
and title
. It also adds in the begging the date
or at least the year or year-month (if they exist, otherwise their data slots are filled with zeroes). Lastly it adds in the end of each line the artists
and the title
of each song it reads from the list. Currently I have disabled/commented out the part that downloads the images, as it's not much necessary.
Remeber to change the path to match the appropriate folders on your device and use your own Genius token (replace the PlaceholderForYourGeniusToken
)!
code
import csv
import requests
from lyricsgenius import Genius
genius = Genius('PlaceholderForYourGeniusToken', timeout=20, sleep_time=1)
'''
#imports two .txt
#importing title list
with open("title_list.txt",'r', encoding='utf-16') as titles_file:
titlelist = titles_file.read().splitlines()
titles_file.close()
# importing artist list
with open("artist_list.txt",'r', encoding='utf-16') as artist_file:
artistlist = artist_file.read().splitlines()
artist_file.close()
'''
titlelist = []
artistlist = []
with open('C:\\Users\BS\\Downloads\\1T\\Texts\\titleartistlist.csv', mode='r', encoding='utf-16') as csv_file:
csv_reader = csv.DictReader(csv_file, delimiter='\t')
#line_count = 0
for row in csv_reader:
'''if line_count == 0:
#print(f'Column names are {", ".join(row)}')
#print(row["title"])
line_count += 1
#print(f'{row["title"]} ; {row["title"]}')
else:'''
#print(row["artist"])
artistlist.append(row["artist"])
titlelist.append(row["title"])
#line_count += 1
#print(f'Processed {line_count} lines.\n')
array_length = len(artistlist)
#searching genius
with open('C:\\Users\BS\\Downloads\\1T\\Texts\\geniusdata.txt', 'w', encoding='utf-16') as gd:
for i in range(array_length):
SArtist = artistlist[i]
STitle = titlelist[i]
song = genius.search_song(STitle, SArtist)
if song is None:
gd.write('0000-00-00\t0000\t0000\t0000\t0000\t0000') #00 or 0000 as error code
gd.write('\t')
gd.write(SArtist)
gd.write('\t')
gd.write(STitle)
gd.write('\n')
else:
song_dict = song.to_dict()
RDate=song_dict.get('release_date_components')
if RDate is None:
line = ['0000-00-00\t',
str(song_dict.get('id')),'\t',
song_dict.get('url'),'\t',
song_dict.get('song_art_image_url'),'\t',
song_dict.get('artist_names'),'\t',
song_dict.get('title'),'\t',
SArtist,'\t',STitle,'\n']
gd.writelines(line)
#uncomment the next two blocks of code if you want to download the images as well
'''image_url = song_dict.get('song_art_image_url') #downloads image
default_url_check = image_url.find('default_cover_image.png') #checks default image
print(default_url_check)
if default_url_check == -1:
file_destination = ''.join(['C:\\Users\BS\\Downloads\\1T\\Images\\Genius\\',image_url.rsplit('/', 1)[-1]])
res = requests.get(image_url)
if res.status_code == 200: # http 200 means success
with open(file_destination, 'wb') as file_handle: # wb means Write Binary
file_handle.write(res.content)
file_handle.close()
print('Image downloaded')
else:
print('Default image, skip.')'''
else:
line = [str(RDate.get('year')),'-',
str(RDate.get('month')),'-',
str(RDate.get('day')),'\t',
str(song_dict.get('id')),'\t',
song_dict.get('url'),'\t',
song_dict.get('song_art_image_url'),'\t',
song_dict.get('artist_names'),'\t',
song_dict.get('title'),'\t',
SArtist,'\t',STitle,'\n']
'''image_url = song_dict.get('song_art_image_url') #downloads image
default_url_check = image_url.find('default_cover_image') #checks default image
if default_url_check == -1:
file_destination = ''.join(['C:\\Users\BS\\Downloads\\1T\\Images\\Genius\\',image_url.rsplit('/', 1)[-1]])
res = requests.get(image_url)
if res.status_code == 200: # http 200 means success
with open(file_destination, 'wb') as file_handle: # wb means Write Binary
file_handle.write(res.content)
file_handle.close()
print('Image downloaded')
else:
print('Default image, skip.')'''
gd.writelines(line)
gd.close()
print('Finished!!\nGo to:\nC:\\Users\BS\\Downloads\\1T\\Texts\\')
#['_type', 'annotation_count', 'api_path', 'artist_names', 'full_title', 'header_image_thumbnail_url', 'header_image_url', 'id', 'instrumental', 'lyrics_owner_id', 'lyrics_state', 'lyrics_updated_at', 'path', 'pyongs_count', 'relationships_index_url', 'release_date_components', 'release_date_for_display', 'release_date_with_abbreviated_month_for_display', 'song_art_image_thumbnail_url', 'song_art_image_url', 'stats', 'title', 'title_with_featured', 'updated_by_human_at', 'url', 'featured_artists', 'primary_artist', 'artist', 'lyrics']
4) Now that we have our python script, we will create a batch script that will call the python script:
-- Name it GeniusFetcherCall.bat
and save it inside the Texts
folder. It's just 3 lines of code:
cd C:\Users\BS\Downloads\1T\Texts
python genius_data_fetcher.py
PAUSE
5) We will use this batch script to create a tool in Mp3tag:
(It makes it easier to call it without searching for the actual file.)
-- Go to File->Options->Tools->New
-- In the name field put Genius Data Fetcher
and in the path field put the path of your batch script.
We have finished setting up Mp3tag!
Now it's time to actually tag the files:
-
Throw all your downloaded song files in
0 Raw
folder. In case you also downloaded .lrc files, throw the .lrc files in the5 Musixmatch
folder. -
Open OneTagger and run the
1. Deezer
profile. (If the downloaded files aren't downloaded using Deemix, run the1. Deezer - Universal
profile instead.)(!Attention!) Re-run if there are fails/skips. If there are fails again, re-run by enabling the
Force Shazam
option in the advanced tab (shazam seems to stop working after 20 (successfull?) scans, so you'll have to manually cut and paste the failed scaned songs to the1 Deezer
folder. Do this section every time we run a profile and you get failed/skipped songs. Remember to move the files to the appropriate folder. (Here we move them from0 Raw
to1 Deezer
manually, because we have the set profile to only move the successfully tagged files to the next folder. I won't repeat this section in the next steps to avoid repeating myself.Once you're done with scanning, move all songs to the
1 Deezer
folder.Side note: failed songs probably won't have the Deezer ReleaseID and TrackID. You can add them manually (painfull) with the edit tag tab of OneTagger (or with Mp3tag), by searching online Deezer for each song separately.
-
Open Mp3tag.
(!Attention!) You must select the appropriate folder each time you use Mp3tag. This time we must open the
1 Deezer
folder by pasting the path of the folder on the directory field located at the middle-bottom right of the window. We want to edit the newly tagged files each time, so we will change that directory after we focus on a different folder. I think simply opening the folder to where we last moved our files should be good. I want mention every time what Directory we will open.Select all the songs and run the action
1. wwwaudio to wwwaudiosource (Deezer) from Deemix
. If you didn't get the songs using Deemix, then choosewwwaudio to wwwaudiosource (Deezer)
instead. This will copy the deezer url of the songs in theWWWAUDIOSOURCE
tag. -
In OneTagger run the
2. Spotify
profile. (If the downloaded files aren't downloaded using Deemix, run the2. Spotify - Universal
profile instead.)Once you're done with scanning, move all songs to the
3 Musicbrainz
folder. -
Open Mp3tag, select all the songs and run the action
2. wwwaudio to www (Spotify)
. This will copy the spotify url of the songs in theWWW
tag. -
In OneTagger run the
3. Musicbrainz
profile. (If the downloaded files aren't downloaded using Deemix, run the3. Musicbrainz - Universal
profile instead.)Once you're done with scanning, move all songs to the
4 Bandcamp
folder. -
In OneTagger run the
4. Bandcamp
profile.Once you're done with scanning, move all songs to the
5 Musixmatch
folder. -
In OneTagger run the
5. Musixmatch
profile.Once you're done with scanning, move the .lrc files (stored in
4 Bandcamp
folder) to the5 Musixmatch
folder. -
Open Mp3tag and tag/rate any songs you want using actions from 3a. to 3e. Each of those actions writes on two different tags, one for windows media player and one for the general rating tag. As you can see the 1/2/3/4/5 star scale corresponts to 1/64/128/192/255 in wmp rating and to 20/40/60/80/100 in rating.
-
In Mp3tag select all the songs and run the
4. Filename format artist - title [year]( -- [YT])
action. This will change the filename of all the songs by using the following template:Artist1; Artist2 - Title [Year]
(not the date)Each artist is separated by
;
and the action adds the-- [YT]
suffix only if we have added[YT]
as genre in the song, which denotes that we got the song from Youtube.The 4b. action is used just in case we don't want to add the [Year] suffix (yet).
-
In Mp3tag select all the songs and run the
5. Add-Fix [Xstar(s)] genre
action. This action reads theRATING
tag and adds the appropriate star rating in theGENRE
tag. i.e. A song with rating 100 gets[5stars]
in the genre tag. A song with 20 rating gets[1star]
. -
In Mp3tag select all songs and run the
6. Replace hiphoprap and Capitalise Genre
action. This fixes theRap/Hip-Hop
genre (some sources use different name for the same genre, so I replace them to be uniform) and capitalises the 1st letter of each word. -
Now it's time to deal with lyrics. Musixmatch may not find all the lyrics or it may not find synced lyrics (on very rare occassions it may create black .lrc files??). Adding lyrics can be very time consuming. Side note: Mp3tag should change the filename of the .lrc files when you change the filename of the song (.flac, .opus etc.) files.
a) One way is to install and use lrcget to automatically batch download lyrics and then copy the generated .lrc files to the
5 Musixmatch
folder.b) Another way is to use the lrclib website which where lrcget fetches the lyrics. You can fine tune the search by yourself. Then you can copy the result to a text file with the same filename of the song you searched and use the .lrc extension. i.e.
The Script; will.i.am - Hall of Fame [2012].flac
should have aThe Script; will.i.am - Hall of Fame [2012].lrc
lyrics file.c) One last way is to browse Genius website (or any other lyrics website) which has only unsynced lyrics and copy-paste the lyrics to an appropriate .lrc file you will create.
Once you have all the lyrics files together, you'll have to batch edit them.
Open all of the files in Notepad++ (just select them all and drag them inside the window). Turn on the document list from notepad to have a better view of the files in a list. Mp3tag and many music players that support lrc files seem to have some issues with extra linebreakes and the way linebreaks are created. On windows
\r\n
is used for a line break, while linux (and mp3tag/music players seem to prefer)\n
. To fix this open the replace dialogue (ctrl+h) on Notepad++. Enable only theWrap around
,Transparency
andExtended
(search mode) options. In theFind what
field we put the text we want to detect and in theReplace with
we put the text which we want our detected text to be replace with.We will run a series of replacements (follow the order):
a) Replace
]
with]
b) Replace
]\n
with]♪\n
c) Replace
\n\r
with♪
d) Replace
\r\n\r\n
with\r\n♪\r\n
e) Replace
\n\n
with\n♪\n
f) Replace
\r\n
with\r\n♪
This should fix most of the lyrics. Save them all (you can try closing the Notepad++ window and press enter on each confirmation dialogue which will ask to save the file before closing.
After all these, in Mp3tag run the
7. Synced Lyrics from lrc
action. It will copy the contents of the .lrc files in the songs (inside theSYNCEDLYRICS
,LYRICS
andUNSYNCEDLYRICS
tags). TheUNSYNCEDLYRICS
tag will have the timestamps removed.Note: Any songs that don't have an .lrc file will return an error window, just ignore it.
-
In Mp3tag run the
8. Export artist and title for genius and backup year and cover
action. This exports a list containing only the artists and the titles of the songs in a .csv file which will later be used by our python script. It also copies theYEAR
(date) tag in theDEEZER_YEAR
tag. Lastly, it exports the cover images in theImages/Old
folder, while adding the_Deezer
suffix to each file created. -
Time to use the script we made: Select a random song, right-click, go to Tools and select the
Genius Data Fetcher
tool. It will open a cmd window and run the python script. This may take a while. It will start writing thegeniusdata.txt
inside theTexts
folder.It may stop at a random point. If this happens, copy the contents of the
geniusdata.txt
to a separate text file, delete thegeniusdata.txt
and remove any artists-titles the script managed to scan on genius. You want to retain the order of the songs as they are in thetitleartistlist.csv
list, so be careful when you merge the data from interrupted uses of the script (create a geniusdata.txt with the same order of songs as they are on titleartistlist.csv). -
Paste the contents of
geniusdata.txt
inside LibreOffice Calc (or any kind of Excel program), read them as csv and selectTab
as the only delimiter. The script may not have been 100% accurate and it may has mistaken songs for different songs. To fix this, check if the genius artists and title match the last 2 columns which contain the artists and the title we used as input. If there is a mismatch set thedate
of this song to0000-00-00
. This will prevent from wrong info to appear later in theYEAR
tag. -
In Mp3tag select all the songs and right-click->Convert->
Text file-Tag
. In the filename field puth the path of thegeniusdata.txt
. In the format string field put this text:%genius_year% %genius_id% %genius_url% %genius_art_url% %temp%
. This reads the values from the text file we created and pastes them in the appropriate tags of our songs. -
In Mp3tag select all songs and run
9. Merge, trim, and genius Year
action. This tidies up theYEAR
andGENIUS_YEAR
tags (merges any duplicate fields, converts the textNone
to 00 (redundant) and it adds a leading zero to the month and year fields of the genius year). Then it compares theGENIUS_YEAR
andDEEZER_YEAR
. If the Genius_year starts with 0 (meaning that the date is 0000-00-00) or the month and the days are zero (year-00-00) and the deezer_year has more info than the year (meaning if it isn't simply 4 digits without month-day) and the absolute difference of the years between deezer and genius years are less than one year, it will keep the old,DEEZER_YEAR
in theYEAR
field, otherwise theGENIUS_YEAR
is written on theYEAR
field. -
In Mp3tag select all songs and run
4. Filename format artist - title [year]( -- [YT])
action. This updates the year in the filename since it probably changed in the step above (19). -
Use any of the
Genre adding [YT]
,Genre adding [Instrument@l]
,Genre adding [Gr33k]
,Genre adding [8b@ll]
,Genre adding [Nitr0]
,Genre adding [F@vourites]
actions if you deem it necessary. Afterwards run the6. Replace hiphoprap and Capitalise Genre
action just to make sure things are properly capitalised.I decided not to use playlists anymore, but instead to add in the
GENRE
tag, names of playlists or (custom) attributes. This way, if the player supports multiple genres, you ~don't need playlists anymore! You just pick the genre(s) you want. I put my custom Genres in[]
to differentiate them from the rest. You can add more if you know how edit my code in the appropriate actions above. The code I've written checks if the Genre I add already exists in theGENRE
tag (it reads all the genres in the tag by mentioning that the separator is\\
) and if it doesn't, then it adds the new Genre, along with the rest that already existed.[YT]
: songs that I downloaded from Youtube[Instrument@l]
: songs that are purely instrumental[Gr33k]
: songs that are of Greek language (you can do something similar for other languages)[8b@ll]
and[Nitr0]
: names of previous playlists[F@vourites]
: songs that I would otherwise add (or already have added) in my spotify/etc. favourites category -
In Mp3tag select all songs that got donwloaded from Deemix (or Deezer) and run the
Source to Deezer
action. This writes the wordDeezer
in theSOURCE
tag. You can edit this if you want to use it with different sources or simply just ignore this step. -
To make sure the correct separators are used, use the
; to double inverted slash
actions. I have decided to use the double inverted slash\\
as my separator in my .flac files when a tag field has multiple tags (for example theArtist
tag in2Pac; Roniece - Changes [2012].flac
will be2Pac\\Roniece
. Mp3tag interpretes\\
as separator for multiple tags and if you check the extended tags of the song, you'll see theArtist
tag twice). Many music players seem to get along with that, so I kept it. -
Time to convert our songs to .opus (we will also keep the .flac files as well).
(!Attention!) There may be an issue with deleting/editing the .opus files on windows, this can be somewhat fixed by following one of the two soltions provided in the comments here on reddit (web archive link).
To do this we must open and set up fre:ac:
Go to Options->General settings setup:
a) Select
Encoders
tab:-- Select the
Opus Audio Encoder
tab. Configure the encoder and leave everything default apart from Bitrate and file extension. Set the Bitrate to128
and the extension to.opus
. Click OK and go back.b) Select
Output files
tab:-- In the output folder put the path of the
6 Opus
folder we created.-- In the output filenames enable only the
Use <filename> when title info is not available
,Append sequential numbers to otherwise identical filenames
andAllow Unicode characters
. In the Filename pattern field put<filename>
(this prevents fre:ac from creating new folder for each song, as the default behaviour would do).And we're done! Fre:ac is set up.
Go to File->Add->Audio file(s) and add all the .flac files (this could also be done differently). Start the encoding process with the "play" button and wait.
-
Now we must put our songs in the correct folders:
-- Move all the .flac files and the .lrc files in the
Flac
folder we created inside theFinal
folder.-- Move all the .opus files in the
Opus
folder we created inside theFinal
folder.-- Copy-paste all the .lrc files in the
Opus
folder we created inside theFinal
folder. -
Now we will transfer any tags to the .opus files that went missing during the conversion.
-- Open Mp3tag and choose the
Flac
folder path. Make sure songs are sorted alphabetically (from a to z), select all and then copy (ctrl+c).-- In Mp3tag choose the
Opus
folder path. Make sure songs are sorted alphabetically (from a to z), select all and then paste (ctrl+v). -
The last necassary (or not so necassary) step! In Mp3tag choose the
Opus
folder path. Select all songs and run theMerge and split tags
action. This changes the separator from\\
to;
. The reason for that is because the music player on my phone doesn't recognize tag fields with multiple tags. Thus, I have to convert the seperator to;
and this way Mp3tag will merge all multiple tags of the same type into a single tag. Then my music player will separate the tags by recognizing the;
separator.
WE DID IT! Our songs are properly organized and tagged!
As you may have noticed, we didn't use one action. I'll explain what it does:
Remove favourite genre
: Removes the [F@vourites]
genre. It searches if this genre exist and if yes it removes it. The only limitation I managed to find in my code is that if you somehow only have the [F@vourites]
genre multiple times (>1 time) and you have no other genre in the tag field, it won't remove anything. It seems like a very rare case, but this is a bug.
Happy tagging!
Extras:
Music players:
-
For my Windows PC I use Quodlibet. It reads multiple tags very well and scans my .flac collection rather fast.
How to set it up:
-- I have enabled the following plug-ins:
Advanced Prefernces
,Application Information
,Change Language
,ListenBrainz Submission
,Rescan Songs
,Synchronized Lyrics
,Unique Query
,View Lyrics
andWaveform Seek Bar
.-- In layout prefernces I'm using the Small Column layout and in the column content I use a custom set up with 3 genre columns. I'm using the Panned browser.
-- In preferences:
a) Song list tab:
- I've enabled
Jump to playing song automatically
,Always allow sorting
,Sort songs when tags are modified
andTitle includes version
. I've selected theArtist
,Title
,Year
,Genre
andLength
to be visible.
b) Browsers:
- I have disabled
Enable one-click ratings
c) Library:
- In the scan directories I have put the path of the
Flac
directory and have enabledScan library on start
.
d) Tags:
- I have everything disabled: I have disabled
Auto-save tag changes
andSave ratings and play counts in tags
.
Generally, I don't want Quodlibet to alter my tags.
- I've enabled
-
For my Android (13) device I'm using Symphony.
It has support for custom tag separators, but it doesn't read multiple tags. That's the reason why I'm separting tags with multiple items using
;
.It takes a long while to initially load the files when you first add the folder, but once it does it is very fast. It has many features, probably the most you can find on an open source android local music player. Plus, it's beauuuutiful.
Music scrobblers/listen history recorders:
I use ListenBrainz on my devices to record my listen history. I have integated my Spotify account too (I just have to find a way to import my whole Spotify listening history with the proper tools). I have installed it on my android device and I added my music players to the list of apps to watch and record. On pc I have the built-in listenbrainz plugin enabled in Quodlibet. One issue or feature (depending on how you see it) with this platform is that it makes publicly available your listening history with detailed timestamps (date and time with minute resolution). That's why I am using a kinda random nickname. This helps you find people with similar tastes.
This is the end of the guide! I hope it helped you somehow or gave you any ideas for your workflow!
I just checked the github page of lsposed and saw that it is now archived :/
I found a short thread on xda mentioning it as well.
The official announcement is on telegram.
This is sad...
Due to the nature of fediverse, you can't just do a "site:lemmy" search as you'd do with reddit (site:reddit.com). I was searching for ways to do it on my firefox browsers and I came to a solution that searches 21 different instances simultaneously, which I consider to be a big part of lemmy (I also include kbin instances). I am using firefox with DDGO (which has a 500-character limit per search query).
There's gonna be a text you will have to copy, I'll just write it once here hidden inside the spoiler:
"URL string"
https://duckduckgo.com/%s (site:lemmy.world |site:kbin.social |site:lemm.ee |site:programming.dev |site:lemmy.ml |site:sh.itjust.works |site:feddit.de |site:lemmy.ca |site:beehaw.org |site:lemmy.dbzer0.com |site:lemmy.blahaj.zone |site:discuss.tchncs.de |site:sopuli.xyz |site:lemmy.one |site:feddit.uk |site:midwest.social |site:infosec.pub |site:slrpnk.net |site:mander.xyz |site:ttrpg.network |site:lemdro.id)
Replace it when I ask you to write the "URL string".
There are different processes, depending on the type of device/OS (computer, mobile/android etc.). I will list some of them and you can pick the one you want:
-
Firefox Android: Go to search settings->manage alternative search engines->add search engine. Pick a name you want (eg.
Lemmy
) and on the search string URL paste the "URL string" I've written above. Now next time you want to search Lemmy, just select "Lemmy" as your search engine. -
Firefox Computer V1: Create a bookmark with a name you want (eg. Lemmy search). In the URL field paste the "URL string" I've written above. In the keyword field add a keyword to use as a prefix to your searches (eg.
@l
). Now to search Lemmy, you can type@l "random search"
in the address bar. -
Firefox Computer V2: Open a new tab and type
about:config
in the address bar. In the search box type:browser.urlbar.update2.engineAliasRefresh
Click on the little+
symbol on the right. Go to firefox Settings->Search or enter this in the address bar:about:preferences#search
In the "Search Shortcuts" section you should notice a new "Add" button. Just like on android, press "Add", insert a name (eg.Lemmy
), add the "URL string" from above and once you're done you can add a keyword (eg.@lemmy
). If you want, you can now go back and disablebrowser.urlbar.update2.engineAliasRefresh
(press the trash can icon) (I don't know if this will crash anything).
I really wanted to search lemmy, but not being able to do a simple site:lemmy detered me from doing so.
So there you have it! The added text is 412 characters which leaves 88 characters for your searches. You can change the url to add/remove instances you want. If anyone can improve it please (like shrinking the url or if you manage to search all instances) it will be appreciated.
Credits:
-
The idea came from this site (which I found on lemmy): https://fedi-search.com/ I asked it to search lemmy on ddgo and gave me a similar string to the one I have above, only limited to fewer instances.
-
I found the biggest instances I wanted to include in the search using the csv from this github page: https://github.com/maltfield/awesome-lemmy-instances/blob/main/awesome-lemmy-instances.csv
-
Lastly, I found the computer process from 2 answers on this stackoverflow question: https://superuser.com/questions/7327/how-to-add-a-custom-search-engine-to-firefox
Hope this helps:)
(The chart legend seems not to be placed properly, maybe that's why they mirrored the chart.)
Oi, I noticed the vertical axis is logarithmic, the impact difference is bigger than I thought.