this post was submitted on 21 Oct 2023
348 points (95.5% liked)

Linux

48216 readers
702 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS
 

Date: Tue, 17 Oct 2023 03:17:36 +0300 From: turistu To: oss-security@...ts.openwall.com Subject: with firefox on X11, any page can pastejack you anytime

Note to the moderator: I have already submitted this to the firefox people three weeks ago, and according to them, this is not a real security issue, or at least not worse than those pesky scripts which you cannot kill without killing firefox itself; if you think the same, just ignore this without replying.

I would however appreciate if you let this through and so give it some visibility so that the other 2 or 3 people who may be affected by this could learn about it.

Thank you very much.

====

In firefox running on X11, any script from any page can freely write to the primary selection, and that can be easily exploited to run arbitrary code on the user's machine.

No user interaction is necessary -- any page able to run javascript can do it, including e.g. a page from a background tab of a minimized window, an iframe inside such a window, an error page, a sandboxed iframe, a page that has reloaded itself via meta http-equiv=refresh, etc.

This applies to all the versions of mozilla/firefox and their derivatives (seamonkey, etc) that I was able to test, including the latest nightly.

Example

The simplest example, which works in the default configurations of systems like OpenBSD or Alpine Linux (= any Unix/Linux system where Wayland is not the default and the default shell does not implement bracketed-paste), would go like this:

Load the following snippet in firefox:

<pre></pre>
intentionally left blank

Then pretend to forget about it, and go about your work. Sooner or later, when trying to paste something in the terminal with shift-Insert or middle click, you will end up running the command writeXPrimary() has injected just between your copy and paste.

live example of that snippet: https://turistu.github.io/firefox/pastejack.html

Short technical explanation

Browsers like firefox have the concepts of "secure context" (e.g. https://) and "transient user activation"; the javascript from the page gets some temporary powers as soon as you have interacted even so little with the page, like clicked, touched, etc.

For instance, writing with Clipboard.writeText() to the windows-style Ctrl-C Ctrl-V clipboard selection is only possible from secure contexts and only in the short while after the user has clicked a button, etc on the page. As this bug demonstrates, those prerequisites are not needed for writing to the primary selection, which on X11 is much more used and much more valuable.

Workaround

Without patching firefox, the only workaround I can think about is disabling the Clipboard.selectAllChildren() function from an addon's content script, e.g. like this:

let block = function(){ throw Error('blocked') };
exportFunction(block, Selection.prototype, { defineAs: 'selectAllChildren' });

Complete extension here at https://github.com/turistu/odds-n-ends/raw/main/firefox/no-sel.xpi.

I tried to submit it to addons.mozilla.org but they didn't accept it. If you're running firefox-esr, the development edition or nightly, you can just set xpinstall.signatures.required to true in about:config and install it with firefox no-sel.xpi.

Firefox Patch

diff -r 9b362770f30b layout/generic/nsFrameSelection.cpp
***
a/layout/generic/nsFrameSelection.cpp	Fri Oct 06 12:03:17 2023 +0000
+++ b/layout/generic/nsFrameSelection.cpp	Sun Oct 08 11:04:41 2023 +0300
@@ -3345,6 +3345,10 @@
     return;  // Don't care if we are still dragging.
   }
 
+  if (aReason &amp; nsISelectionListener::JS_REASON) {
+    return;
+  }
+
   if (!aDocument || aSelection.IsCollapsed()) {
 #ifdef DEBUG_CLIPBOARD
     fprintf(stderr, "CLIPBOARD: no selection/collapsed selection\n");

The idea of this patch was to always prevent javascript from indirectly messing with the primary selection via the Selection API. However, it turned out that the JS_REASON flag was not reliable; if javascript calls some function like addRange() or selectAllChildren() while the user has started dragging but hasn't released the mouse button yet, that code will be called without that flag but with the text set by javascript, not the text selected by the user. However, I think that this patch is still enough to fill the glaring hole opened by selectAllChildren().

About the example and bracketed-paste

The bracketed paste feature of bash/readline and zsh means that you cannot just append a CR or LF to the payload and be done, it's the user who has to press ENTER for it to run.

However, workarounds exist. For instance, some terminals like mlterm don't filter out the pasted data, and you can terminate the pasting mode early by inserting a \e[201~ in the payload.

For bash, you can take advantage of some quirks in the readline library to turn off the highlighting and make the payload invisible to the user. E.g.:

let payload = 'touch ~/LOL-' + Date.now() / 1000;
writeXPrimary('\n' + payload + '\n'.repeat(100) + ' '.repeat(30)
	+ '\n'.repeat(100))

which will confuse the user with the same screen as when some stray background job had written something to the terminal:

user@...t:~$ : previous unrelated command
user@...t:~$	&lt;-- paste here
#   &lt;-- cursor here, most users will just hit Enter to get a new prompt

live example of that snippet: https://turistu.github.io/firefox/bash-pastejack.html

Just to be clear, I don't think that either mlterm, bash, nor the shells that don't do have that bracketed-paste feature are at fault here in any way (and I personally always turn off that misfeature as it badly interferes with my workflow): It's firefox which should get all the blame for letting random javascript evade its pretended "sandbox" in this way.

About Wayland

For firefox running in Wayland, writeXPrimary() will only succeed when the firefox window (the main window, not necessarily the tab the code runs in) has the focus. Otherwise the selection will be cleared. At first I assumed that this is something specific to the Wayland protocol, but that turned out to be utterly false; it's just some quirk, bug or "feature" specific to either firefox itself or GTK.

But I think that's still bad enough, even if the page should take care to only set the selection when the main window has gained focus.

And of course, all this doesn't affect the situation where you're copying and pasting in another firefox tab with a different context, origin, etc; and all the other situations where you don't appreciate having random javascript you don't even know about messing with your copy & paste.

===

This is a slightly edited version of https://github.com/turistu/odds-n-ends/blob/main/firefox/pastejack.md.

I will correct any errors or omissions and also add more info there.

top 50 comments
sorted by: hot top controversial new old
[–] jsdz@lemmy.ml 71 points 1 year ago* (last edited 1 year ago) (1 children)

I tried to submit it to addons.mozilla.org but they didn’t accept it.

It sort of looks as if they did accept it. If they were hesitant, perhaps it has something to do with the description suggesting that it's a broken and pointless temporary kludge, as well as calling Firefox "removed", and the ridiculously irrelevant screenshot.

I didn't realise it was that easy to build a simple firefox extension like that. Maybe I'll modify it to disable the whole clipboard api and some other stuff.

[–] Thorned_Rose@kbin.social 47 points 1 year ago (1 children)

Wtf is that screenshot?! When you're talking about user protection, it generally helps to have a relevant screenshot and not something thats going to confuse or put off users.

[–] clothes@lemmy.world 13 points 1 year ago* (last edited 1 year ago)

Wow, you weren't kidding! Makes me think it's a sketchy add-on, even if it's not.

[–] lemmyvore@feddit.nl 50 points 1 year ago* (last edited 1 year ago) (2 children)

There's one tiny little problem with the hijack scenario – people only ever paste from the primary selection immediately after selecting something themselves (and thus overwriting whatever was in there). That's precisely because the primary selection is so easy to overwrite (basically when you select anything), so you want to select and then immediately paste so you don't lose it.

So in reality this scenario in which a random page injects something in the primary selection and the user pastes it sometime later in a terminal, of all things, probably has like a million to one chance of occuring.

PS: Also, just for trivia, any user who's been around the console for a while will hit Ctrl+C out of reflex when confronted with unexpected output, not Enter.

[–] fahfahfahfah@lemmy.billiam.net 18 points 1 year ago (3 children)

PS: Also, just for trivia, any user who's been around the console for a while will hit Ctrl+C out of reflex when confronted with unexpected output, not Enter.

You don’t need to press enter if there’s a new line character in the content.

[–] lemmyvore@feddit.nl 35 points 1 year ago

As explained in the post, most modern terminal apps will ignore the newlines and not execute the command until the user hits Enter explicitly.

[–] vrighter@discuss.tchncs.de 13 points 1 year ago

nowadays most terminals send control codes indicating whether the text was typed or pasted. So the shell can handle newlines differently in different cases

[–] emax_gomax@lemmy.world 4 points 1 year ago

Both bash and zsh will block until the end of a clipboard input and require an explicit return after it to execute. IIRC this is enabled by default in zsh but can be set for bash. Frankly I'm amazed it isn't the default everywhere.

[–] stifle867@programming.dev 7 points 1 year ago (1 children)

The included example script re-runs the selection every 500ms so it would instantly overwrite what the user has selected. In theory you could even lower this timer.

[–] lemmyvore@feddit.nl 3 points 1 year ago (1 children)

That doesn't do anything to facilitate the attack, on the contrary. In order for the primary selection to work, the selected text must stay marked as selection until you paste, and everybody who uses primary selection has been conditioned to watch for that selection. If it were to suddenly dissapear you would assume you clicked somewhere by mistake, and attempt to select again, and again. You wouldn't attempt to paste because you've been taught that the selection must hold in order to be able to paste. My next reaction would be to use the regular clipboard instead.

If anything, the script should attempt a longer retry, not a shorter one. A few seconds might be just right to catch someone after they've selected and are moving to the paste window, but before they've pasted the good text. But since the script is looping blindly and has no way to know when to inject, it would have to be a purely coincidental good timing.

I can't imagine that this will manage to succeed very often.

[–] stifle867@programming.dev 4 points 1 year ago (1 children)

It's a simple POC. To address your points you could easily add an event listener for the window blur event so whenever the window loses focuses. You could also use javascript to manually highlight the user selected text when the window regains focus. You can make it as complex as you wanted.

The point is that the core of the issue, that you can override the users select buffer which could be used to maliciously insert commands, exists.

[–] lemmyvore@feddit.nl 2 points 1 year ago (1 children)

The Firefox window is not necessarily involved, the user could be copy-pasting between two other windows.

Look, I agree it's annoying and it should be fixed. God knows Firefox is full of dumb little quirks that should have been fixed 10 years ago. But it's not the gruesome attack vector it's made out to be. It is a vector but not a great one, too many planets need to align for anything to happen.

[–] stifle867@programming.dev 4 points 1 year ago

I 100% agree that it effects an extremely small percentage of the population, but it's also not hard to imagine a scenario in which this can have real consequences.

Let's imagine I have a popular website that documents Linux tips and tricks (think: which command can I run to see drive storage used again?). In there I have a short command people can copy and paste to run (maybe df -h). The user copies this command and switches window to their terminal, at which point the blur event listener fires and I override the innocuous command with a malicious command. The user pastes it into their terminal without any indication that the primary selection content is now different.

Yes, this is due to both insecure X and shell settings that doesn't effect everyone (Wayland and sane shell). It's as much or even more the fault of the insecure programs, but Firefox is a part of that. Even in this situation it would be much more likely that the user is effected compared to the "general population". It's more of a targeted attack than a broad insecurity, but it's not a "one in a million" chance.

[–] ClemaX@lemm.ee 38 points 1 year ago

Maybe Firefox needs to add a new "Clipboard access" permission that can be granted on a site-per-site basis. When disabled, simple highlight and copy could still be enabled if hidden text cannot be added in between normal text.

The same permission model could be used system wide, but I do not think that such a feature exists on the X server or Wayland. Maybe using a wrapper that runs before the Desktop Environment?

[–] smileyhead@discuss.tchncs.de 29 points 1 year ago (2 children)
[–] LufyCZ@lemmy.dbzer0.com 9 points 1 year ago (1 children)

Yes, pure html pages are so much better and nicer to use!

[–] smileyhead@discuss.tchncs.de 12 points 1 year ago (1 children)

Not always 🤞. But most sites should be just documents + suggested styling. It really looks good and is super light.

[–] Taian@sh.itjust.works 1 points 1 year ago (1 children)

Must people also should only eat pineapples, they are tasty.

[–] smileyhead@discuss.tchncs.de 5 points 1 year ago

Technical problems created by complicating the web to the point where only one/two companies in the world are able to maintain web browser is not a matter of taste.

[–] schnurrito@discuss.tchncs.de 5 points 1 year ago (1 children)

JavaScript has created a cross-platform world in which people can do most things without being locked into their OS. That is a good thing.

[–] smileyhead@discuss.tchncs.de 6 points 1 year ago* (last edited 1 year ago) (2 children)

A world where you cannot access bank, buy a flight ticket, do your taxes or rent a domain name without loading up propietary program on your machine that should be unnessesary.

I'm not against JavaScript as a whole. But those things should not require any additional app, regardles if compiled to assembly and running on Windows or compiled to JavaScript and running in Chrome. Anything above pure HTML should be optional and critical websites (like goverment) should work with scripts or styles disabled.

[–] schnurrito@discuss.tchncs.de 4 points 1 year ago

I don't disagree with that at all. But better that it runs in the browser's sandbox than that you have to install it to your machine which would work only under certain OS.

[–] AnUnusualRelic@lemmy.world 2 points 1 year ago

Case in point, in France we used to do all those things using a minitel terminal (which is about as bright as a VT100) and it worked fine (although at a slow 1200/75 speed).

[–] possiblylinux127@lemmy.zip 22 points 1 year ago* (last edited 1 year ago) (1 children)
[–] MonkderZweite@feddit.ch 4 points 1 year ago* (last edited 1 year ago) (1 children)
[–] BaumGeist@lemmy.ml 6 points 1 year ago (1 children)

If that's true, I urge you to submit your findings to the relevant bug bounty program of whichever browser and at least get paid for all the hard work you've been doing

load more comments (1 replies)
[–] stifle867@programming.dev 21 points 1 year ago (1 children)

While this is a real issue, the threat is best mitigated outside of the browser. In theory any application you run could put contents in your primary selection, the threat is what you do with that. The biggest threats I can imagine are insecure shell settings which the author pointed out and can be mitigated easily. Or as a commenter pointed out, cryptocurrency related activities could be at risk - such as pasting in an address to send the currency to could be hijacked and you probably wouldn't even notice as the addresses are random. X is known to be insecure and if you're doing something sensitive like handling cryptocurrency it would be best practice not to run X anyway.

[–] Natanael 8 points 1 year ago

A background service showing what you just copied might work for that, including one that could be set to automatically detect certain exanples of insecure clipboard content (hidden lines, weird Unicode, etc)

[–] avidamoeba@lemmy.ca 19 points 1 year ago (1 children)

Are Chromium browsers affected by this too?

[–] hottari@lemmy.ml 26 points 1 year ago

Long answer: Chrome like every other application with a textbox will paste the text when copied from Firefox (bug originator). But you cannot trigger this bug from Chrome so...

Short answer: No.

[–] nyan@lemmy.cafe 15 points 1 year ago

And people wonder why my main browser profile restricts Javascript so tightly.

[–] ProgrammingSocks@pawb.social 10 points 1 year ago

Wow am I glad for my NoScript usage right now. I'm definitely going to be even more restrictive after this.

[–] qwool@lemmy.world 8 points 1 year ago

javascript shouldve only been used for changine element state and sending requests. anything more major, like mic access or custom players, would be sandboxed wasm that asks for permissions

[–] chicken@lemmy.dbzer0.com 8 points 1 year ago

this is not a real security issue

This could be a huge security issue for anyone doing cryptocurrency stuff

[–] darcy@sh.itjust.works 5 points 1 year ago

great explaination

[–] Pantherina@feddit.de 3 points 1 year ago (2 children)

Thanks! So when using the Firefox or Librewolf or Torbrowser Flatpak, make sure to disable X11 and X11 Fallback!

[–] donio@lemmy.world 21 points 1 year ago

The last paragraph notes this is not X11 specific, Wayland is affected too it's just that a bug prevents it from working when the FF window is not focused.

[–] iHUNTcriminals@lemm.ee 2 points 1 year ago (1 children)
[–] Infiltrated_ad8271@kbin.social 1 points 1 year ago (1 children)

Search flatseal on flathub.

[–] Pantherina@feddit.de 2 points 1 year ago

In KDE its in the settings

[–] MigratingtoLemmy@lemmy.world 0 points 1 year ago (1 children)

I'm not a web developer: is this a problem on Librewolf? Any settings I should be looking at?

[–] stifle867@programming.dev 5 points 1 year ago (1 children)

It would be much easier to check the settings for your shell and display server. It's a very niche threat. Think about how having something copied into your clipboard could actually effect you? I can't imagine too many scenarios where you would paste something malicious that would actually be a problem. Paste something malicious into an email and you could just delete it. Paste something into the URL address bar and it wouldn't submit until you told it to. Paste something malicious into your terminal and it wouldn't submit until you hit enter (check that last one yourself).

Alternatively, disable javascript in the browser.

[–] MigratingtoLemmy@lemmy.world 0 points 1 year ago

I think there is a way to paste commands into the shell which will run without me pressing the carriage return.

I do disable JS on websites I've never visited before, and the ones I allow to use JS, I attempt to audit the domains that need to run for the website to function.

load more comments
view more: next ›