The average user would still try to change DNS settings by editing /etc/relov.conf (which is overwritten and will not survive reboots) or changing settings in Network Manager.
No. The average user would use NetworkManager GUI integrated into DE.
this post was submitted on 20 Oct 2023
104 points (86.6% liked)
Linux
48083 readers
774 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
load more comments
(3 replies)
changing settings in Network Manager.
What's wrong with this method? I feel like this is the main one and it works well for me. Even if you were using systemd-resolved, I believe it still works.
This is the answer for desktop Linux. Have NM create the drop in for systemd-resolved when the settings are changed. This is NM’s job.
1.It doesn't support DoH 2.It's set per connection, not system-wide. If you connect to another wifi network you have to set dns again.
Do any modern OS's set DNS system wide?
I don't disagree there should be an option because I see maybe why they wouldn't do that.
All of them?
Oh never mind. I'm thinking per adapter, not per connection. You're right.
load more comments
(1 replies)
I typically leave my DNS config to my router and PiHole. I run a VPN server to my home network so I have the same setup no matter where I am. I'll agree, it used to be that /etc/resolv.conf was the go to, but systemd had been interesting to say the least.
I also found this if it helps you any.
load more comments
(2 replies)
Most major Linux distributions use systemd-resolved for DNS but there is no utility for changing its configuration.
Nor should there be. That's what the configuration files are for, and the utility to edit them is the editor of your choice.
My two cents: Yes, it's bad. The biggest hurdle to people not "intimately familiar" with their distro is A) what it's using for DNS configuration and B) realizing that there are so many different ways in different distributions, and sometimes within one distribution, that you have to be very careful what googled results you follow. That many browsers do their own thing doesn't help. I think the best way to solve it would be some desktop level abstraction like PackageKit where it doesn't really matter what services does the resolving under the hood.
Totally agree. There should be only one place for setting the system-wide DNS.
I don't think systemd-resolved has support for DNS-over-HTTPS yet but it has support for DNS over TLS which I have used issue free for years now.
All the browsers will use your system configured DNS if you do not touch the browser's DNS settings.
DNS is not broken on Linux, your configuration is.
Your suggested solution would leak DNS for everything except thr browser. That's a broken implementation
Your suggested solution would leak DNS for everything except thr browser
How so?
All the browsers will use your system configured DNS if you do not touch the browser’s DNS settings.
Not necessarily. Firefox ships with its own DoH enabled out of the box, which uses Cloudflare servers.
Then Firefox is broken in this context. It should respect the user's system DNS settings.
Edit: You are wrong. The correct answer is somewhere along the lines of borderline confusing and you don't have to worry about it if everything is working. In my case, it used my DNS provider set by systemd-resolved and not cloudflare but YMMV.
This is what the default menu for Firefox DNS settings say:
Enable secure DNS using:
...
Firefox decides when to use secure DNS to protect your privacy.
Use secure DNS in regions where it’s available
Use your default DNS resolver if there is a problem with the secure DNS provider
Use a local provider, if possible
....
Turn off when VPN, parental control, or enterprise policies are active
Turn off when a network tells Firefox it shouldn’t use secure DNS
load more comments
(4 replies)
I don't touch my fedora DNS settings because my openwrt router handles DoT for the entire network.
That doesn't help outside of home. When we are in an untrusted network then the DNS mess makes us vulnerable for spoofing attacks.
Wireguard to home or a vps running a pihole. Block all dns other than over wireguard.
- Wireguard
- I run my own DoT/DoH server and able to connect it from everywhere. This makes option 1 mostly obsolete.
PS. And yes, I fucking love to solve captchas. No, I am not a Robot.
load more comments
(2 replies)
Slightly off topic, but as long as we're ranting about DNS...
Proxmox handles DNS for each container as a setting in the hypervisor. It's not a bad way of simplifying things, but if, hypothetically, you didn't know about that, then you could find yourself in a situation where you spend an entire afternoon trying every single one of the million different ways to edit DNS in Linux and getting increasingly frustrated because the IP gets overwritten every time you restart the container no matter what you do, until eventually you figure out that the solution is just like three clicks and a text entry box in the Proxmox GUI!
...Hypothetically, of course.
Wait, what? LOL didn’t know Proxmox had that!
Thanks, you’ve saved me from spending some afternoons. I don’t want to think about how much time I spent on DNS before this
Modern browsers use their buit-in DNS settings which adds to the confusion.
There's no way of stopping any application sending DNS queries on its own unless you really want to lock down everything with a heavy hand (firewall, container, apparmor / selinux). As long as there's a toggle to turn it off, I'm okay with that.
How do you think it should be fixed?
The Tailscale folks speak of systemd-resolved positively and it works well for my own use case.
Right now I use both systemd-resolved & systemd-networkd on my laptop with a dnsproxy service to query outside DNS servers with DNS-over-HTTPS. systemd-resolved is responsible for handling queries from applications, caching and per-domain DNS routing (~home.arpa for virtual machines and ~lan for machines in my home network).
There is one little caveat: when I have to connect to a free Wi-Fi which requires authorizing via a captive portal implemented by traffic hijacking, I'll have to enable DNSDefaultRoute= in the Wi-Fi network config file, tell systemd-networkd to reload, finish the authorization in a browser page, revert the previous change, reload systemd-networkd again. It's a lot of steps but I can automate most of them with a script for now.
Long term wise, hopefully systemd-resolved will support DNS-over-HTTPS (and DNS-over-QUIC) then I can stop running dnsproxy.
Edit: link to some blog post
I just edit resolv.conf directly, and then do chattr +i /etc/resolv.conf to make it persistent
Systemd likes to ruin all the easy stuff with overcomplicated bloated programms.
No software should EVER touch any DNS related configuration or file and no application should bring it’s own system for DNS request. Everything regarding DNS without any exception should be done by the application that sets up and handle the network connection.
load more comments
(1 replies)
This isn't really a "Linux" problem. Calling it a Linux problem implies all distros do the same thing out of the box because it's a part of the core system. Systemd has a file, /etc/systemd/resolved.conf which has one line DNS= that you can add the servers you want. It's as simple as that. If you're using Dnsmasq for DNS instead, you'd edit the Dnsmasq file. If you're not using my of those (i.e. you removed systemd-resolved, Dnsmasq, etc) then you can just edit the /etc/reeolv.conf directly without worry of it being overwritten.
While many distros come with systemd out of the box, not all of them do. For example, I use Gentoo with rc and after editing my resolv.conf, never had to worry about it again unless I decided to install a custom DNS software on it later.
I read many replies to your post as "DNS software shouldn't be allowed to change DNS settings" for the most part, and that doesn't quite make sense to me. If it's a problem, remove said software. Browsers are definitely annoying in the DNS front, I won't disagree with that. Fortunately, they allow you to turn that off though.
You haven't used Ubuntu Server... The resolv.conf is managed by the network manager (NetworkManager if I recall correctly). But if you configure the DNS in NM it won't survive the reboot because there is another layer on top, cloudinit.
This is terrible. At least they should deprecate that file.
Can't, it's hardcoded by too many programs out there. resolv.conf is still the place to get DNS configuration, but it was hijacked by various "helping" tools so you can't edit it manually anymore. Why they couldn't stick to adding /etc/resolv.d/*.conf files like to many other /etc/ stuff, I'll never know.
You basically just made the case for exactly why.
Programs should be using the system resolver, not parsing that file.
The system resolver should have predictable behavior. But if other programs are doing their own DNS resolution (or otherwise predicating their functionality) based directly on the contents of resolv.conf then their behavior will not always be consistent with the system resolver (or with how the sysadmin intended things to function).
And that can break things in subtle, unpredictable ways, which is always a headache.
Thus, on some modern systems, resolv.conf simply declares the local systemd-resolved instance (i.e. 127.0.0.1) and nothing else.
A single global resolv.conf file also will not let you configure different behavior based on interface or on network namespace. Want to ensure DNS lookups for specific apps occur only through your VPN-specific DNS servers but all other apps only use the normal system resolvers (i.e. no leaking from either side of the divide)? Want to also ensure DNS lookups for those specific apps fail when the VPN is down (again, as opposed to leaking)? systemd-resolved has your back.
And before anyone asks, yes, I am aware there are other, more crude and convoluted ways to do that with e.g. iptables (just like you can use crude, inconsistent init.d spaghetti scripts to manage services). It's just one single real-world example.
A single global resolv.conf file also will not let you configure different behavior based on interface or on network namespace.
The point is to configure everything using consistent, predictable configuration files and syntax, and to ensure consistent, predictable behavior.
But if you ultimately still want resolv.conf.d back, then your distro of choice undoubtedly provides a way to do so.
Programs should be using the system resolver, not parsing that file.
What's a "system resolver"? We're talking about DNS servers. You're either running one locally or not. Either way, you need a way for everybody to know what DNS servers to use, regardless of whether you run one on the machine. That's where resolv.conf comes in.
And that can break things in subtle, unpredictable ways, which is always a headache.
Let's see some examples.
A single global resolv.conf file also will not let you configure different behavior based on interface or on network namespace.
Good, because that has nothing to do with DNS, it's a matter of routing. They're orthogonal issues.
load more comments
(1 replies)
Very much agreed 👍 I realized when using the dnscrypt to set the DNS settings. There is resolv.conf which used to be the final authority regarding your DNS. Now I don't know anymore
it still is, just make it read only.
not reliable, even if it should be. i've seen updates replace the file in a way that clears the read-only flag. same with other clever tricks like making it a symlink.
Yup. Tried that, doesn't work.
chattr +i
;)
It's very easy when not using systemd-resolved.
In defense of systemd-resolved, it's meant for static configurations. I absolutely love it for my stationary machines for its simplicity and tooling. However, for machines that might need to change settings at one point - say notebooks - I'd never consider it. Same for systemd-networkd.
Just between yesterday and today I was struggling with this, to get DoH or DoT working, but Network Manager would override /etc/resolv.conf. At least I figured out how to stop NM from modifying the DNS.
I tried my putting my dns settings in /etc/systemd/resolv.conf, as suggested by Nextdns setup page, but that didn't seem to work, at least on Tumbleweed. On my Debian laptop running as a headless server, the /etc/systemd/resolv.conf does work.
I'm currently with Stubby, and it's working at least, but I would've liked to figure out the systemd-resolved way on Tumbleweed.
No problems here using /etc/systemd/resolved.conf for NextDNS settings. I also set the dns settings for NextDNS in Firefox.
view more: next ›