I have an RTL-SDR v4, and a Raspberry Pi. I am wondering if there is some way to get the ease of use that comes with the flipper zero with the pi. This is ignoring the packaging, and how small the flipper is. And also ignoring the replaying of signals, as additional hardware would be needed.

top 3 comments

sorted by: hot top controversial new old

[–] pelya@lemmy.world 1 points 4 months ago

You can listen to FM radio with gqrx relatively easily, if you can navigate through hundreds of input boxes.

sudo apt-get install gqrx

Anything more complicated will require some coding knowledge, unless someone already created a library for that specific thing.

There is also a ready-made package to listen to GPS signal, unfortunately it needs an external amplifier and a proper antenna, because RTL-SDR is not sensitive enough for GPS.

[–] duckythescientist@sh.itjust.works 1 points 4 months ago (1 children)

Universal Radio Hacker probably isn't as simple as you are hoping, but it should be moderately easy and very powerful https://github.com/jopohl/urh

[–] Dust0741@lemmy.world 1 points 4 months ago

Ah cool. Yea asking for something as simple as the flipper is basically impossible with my setup.