3DPrinting

15591 readers

38 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

j4k3@lemmy.world

andypiper@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee

Nesting capabilities of slicer (overview) (lemmy.ml)

submitted 5 months ago* (last edited 5 months ago) by EmilieEvans@lemmy.ml to c/3dprinting@lemmy.world

14 comments fedilink hide all child comments

Short overview of how good the nesting capabilities of various 3D slicer are.

The task is simple: placing as many of these shapes on a 200x300mm printed as possible. Manual (quick and dirty for reference): 6 pcs.

Ranking:

Ultimaker Cura: 7 pcs.
human (me): 6 pcs.
Orca slicer: 5 pcs.
PrusaSlicer & BCN3D stratos: 4 pcs. By switching (for this particular part) from the worst (Prusa) to the best (Cura) slicer the nesting performance improved by a whopping 75%!

Ultimaker Cura:

Prusa:

BCN3D Stratos (forked from an old version of Cura):

OrcaSlicer:

you are viewing a single comment's thread
view the rest of the comments

[–] EmilieEvans@lemmy.ml 1 points 5 months ago (1 children)

With mainsail and klipper, you can cancel one failed part mid-print and keep going on the rest of the parts.

There is an addon for Duet (RRF) but I can't get it working. Anyway, once it is time for a batch print the first testprint has been completed successfully and build plate adhesion is a non-issue on this printer.

You have to tell it the dimensions of your extruded head, so it doesn’t crash the part Ask me how I destroyed two z-endstops this year (very asymmetrical toolhead and Prusa can't be configured to reflect this and with a "radius" large enough it would block half of the printbed (60mm radius or so) meaning eyeballing is the best option).

I only use this option if I need the part before the entire batch is finished and don't want to start multiple prints. Which isn't frequent.

[–] mystik@lemmy.world 1 points 5 months ago

I think it's not widely front-and-center because it's kinda fiddly, especially with folks with customized printers and there are caveats that can damage the machine or ruin the print if you are not careful. Sadly, I think that some of the more 'closed' slicer/printer systems could support it more reliably because the dimensions of the head + arm are much better known and the tool path can be planned much more precisely.