this post was submitted on 24 Jan 2024
105 points (95.7% liked)
Linux
48216 readers
1351 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
What's up with the ux design of nix? I get it's made for advanced users but still. I'm reading through this guide and man it's convoluted.
The different ways of installing packages. Either through editing the configuration.nix or running a command. The weird inconsistency of nix commands.
nix-env -iAto install andnix-env --uninstallto uninstall. Then updating usesnix-channel --updatebut upgrade usesnixos-rebuild switch --upgrade. All this to use the package manager. Also haven't even mentioned flakes or home manager.It's a cool OS, but the UX really needs work imo.
[Edit] I do wanna add something else too because I feel like my point isn't getting across.
It's okay to have a complicated ui. Especially if your target audience are tech-savvy. But even tech-savvy people have to start as new users. A tech-savvy new user isn't going to know what the best practices are. Being able to anticipate the steps for installing a package is important for ux. If the commands for installing packages isn't cohesive/intuitive, then the user has to spend more time looking for guides and learning how to use the software.
People also mentioned a new command in the works. This is great! However, these current commands are being recommended through blogs and nix. New users won't know about this new command.
There is controversy in the nix world because nix flakes were (some say) merged without proper vetting first. OG nix diehards don't want to taint nix documentation with 'experimental' flakes. But probably the majority of nix users are all in on flakes. So you have documentation from the OG camp that doesn't include flakes, and you have innumerable unofficial guides for the flakes way. This on top of the quirkiness of nix the language and the multiple ways to do things. Unfortunate.
IMO nix-env was a mistake. It feels like an imperative package manager which may be comfortable to new users who are used to apt or similar. But really what you should be doing on nix is maintaining *.nix files which document/specify your system setup, and nixos-rebuild to update your system to that configuration. Similarly, nix channels are an imperative holdover, which can be done away with if you use flakes, which results in your current nixpkgs version being documented in a system level flake.lock file.
I think both nix-env and flakes are designed with making package management easier. Nix-env tries to make it intuitive and familiar for new users. Flakes improve package management by simplifying the configuration.
Personally I would love to see syntax highlighting, language server, code completion. Maybe all in a dedicated application which is configured to give the easiest experience for new users. If nix is intended to be managed through config files, then the experience of writing a config should be as easy as possible.
Syntax highlighting, LSP and code formatting work flawlessly for me using Helix, and therefore should on any editor that implemented LSP
The intent of nix-env was to make it easier, but the effect was to push some of your system state into a shadowy 'env' realm that is not managed by your *nix files. Same with channels - its state that isn't in your configuration.nix.
To me the whole point is to have all your state in some files you can check in to version control, and use to reproduce your system.
Agree it would be cool to have a way to edit nix files that would give you all the args to functions, code completion etc. You do get some of that with the nix repl. Would be nice to even have a GUI for selecting packages for those that don't "do" text editing.
I'm using nixd for a nix language server, but haven't seen a lot of benefit so far to be honest. I think part of the reason is nixpkgs isn't pulled in until runtime, so most things are undefined as far as the lsp is concerned. Haven't put a lot of time into it, there may be ways to make it more useful.
They have resolved this exact problem. There is an "experimental" cli tool that fixes a lot of your complaints about nix-env, nix-channel, etc. Itcs wrapped together with "flakes". This newer feature is a little different, and working with or without flakes segments the community AND the types of articles about nix, like this one.
As far as I know though, nixos related thing still have a bizarre set of commands, and even with flakes "nixos-rebuild switch --upgrade" is still how you switch configs.
And as far as installation goes, using nix-env -iA really is a bad practice. Thats installing something ad hoc like you would in any other package manager. That defeats the point of nixos, where your configuration file explicitly defines all the packages you need installed, and nothing else. Nix will remove any packages you didnt specify.
Oh that's good that they are addressing those issues with a new command. Hopefully it gets into stable soon.
Might be that
nix-env -iAis bad practice! I'm strictly talking about ux design here andnix-env -iAis being recommend by blogs and nix themselves. (Nixpkgs tells you how to install usingnix-env -iA)A new user isn't going to know what bad practice is.
It actually recommends using
nix-env -i, which is even worse because with that command it searches the whole repository instead of just getting the correct attribute on nixpkgs. It takes half a minute to run the command, it's insane.What is this experimental tool called so I can read more about it?
Add this to your nix.conf: experimental-features = nix-command flakes
Then check out nix --help.
I do think it's important to emphasize the difference between installing software in user environments and system wide, which is why the tool is named nix-env. System packages must be installed via the nixos configuration file and a rebuild.
To me the biggest missing piece for new users is a tool to help manage your system configuration and reduce the frustration of having to constantly look up nix syntax or nixpkgs quirks. Maybe thinking of it as a nixos/nix IDE? Also a polished distribution built on nixos would be a good starting point (and easy to do, I didn't realize I could just copy someone else's configuration until well after I had my system working well enough)
The other thing that got me starting out is the need to garbage collect old packages. It's not strictly necessary if you have a large enough disk, but it took me several iterations of filling my root partition before I figured out how to properly clean up old generations.
Have a good guide on cleanup? 👀
I think ultimately
Sudo nix-collect-garbage --delete-old
Is my go-to command. For a while I was looking at generations manually, but now I just wait a while (days, a few reboots, or until I need more space) to run this after changing things in case the new stuff is broken.
I think running this as my normal user cleans out old env generations... But I'm not 100% sure.
Imho I wouldn't bother with nix-env or nix profile. It just creates a secondary list of packages that needs to be maintained and it's cumbersome to do so. There's nix-shell or nix shell if you need a package temporarily and there's your configuration.nix or flake for everything else.
Side note: nix profile at least has consistent commands: install/remove/upgrade
After trying out Nix as a package manager I realized I have a pretty different world view than the makers of Nix. I agree with the end goal but how they are trying achieve it is just alien to me. The nix command line is just downright user hostile.
I am personally hoping that someone else takes a stab at the Nix concept but have accepted Nix isn’t for me.
I've read so many things that try to explain what flakes are, and for the life of me I still don't understand what they are or what they're for lol.
They're not that different from the classic nix files. Their main difference is that their inputs are always well-defined (as opposed to a channels registry, i.e. you can get totally different systems by reapplying a configuration when you change channels which doesn't change your nix file at all). A configuration is always exactly described by a flake.nix and flake.lock.
I mean there is more to it, but this is the primary motivation. What you would normally put into use case specific nix files goes into a flake's output section. The stuff in your input sections is what you can use in there.
The errors are also pretty terrible, usually the thing that interests you is buried under a lot of text that makes troubleshooting a real pain.
Yeah because when you make an error it causes a snowball affect and it shows you too little information but when you look at the trace its a wall of errors.
oof, yeah.
i had a syntax error in my dotfiles that took me two hours to solve.
it was a missing semicolon that was wayyy above where the error said it was. it didn't even say missing semicolon, instead saying
unexpected '}' on line ...Yep, today I had a typo in a package name, and it cascaded into a syntax error. The syntax was absolutely fine.
Here's an example of a tutorial that uses flakes and the new cli. You might glance through here to see how the syntax compares: https://zero-to-nix.com/start