Motorcycles

2460 readers

2 users here now

Here we discuss everything related to riding, maintenance and gear.

founded 1 year ago

MODERATORS

behohippy@lemmy.world

Scooter misfire at top speed. (lemmy.one)

submitted 1 year ago by pepsison52895@lemmy.one to c/motorcycles@lemmy.world

2 comments fedilink hide all child comments

I've got a 1984 Honda Elite 125 scooter and it misfires at top speed. At WOT, it pulls up to 48 MPH and starts popping and surging. Backing down to about 90% throttle smooths it out and brings it up to 50-51 MPH. I've tried changing the main jets and it makes no difference. It changes how hard and smoothly it accelerates, but it still starts stumbling at the same point.

I was thinking it had a rev limiter of some kind, but changing the CDI also had no impact.

So far, the carb has been replaced (PO put a 250 carb on it for some reason and it still had the same issue, but was running FAR too rich). Ignition coil, spark plug, plug wire, and CDI have all been replaced as well without change.

you are viewing a single comment's thread
view the rest of the comments

[–] pepsison52895@lemmy.one 3 points 1 year ago

Looks like it was a mixture issue. When I swapped the jets before, I had some old foam filter on it and an open header (previous owner cut it unfortunately). Now it has a go kart muffler and a proper cone filter, so I decided to mess with the jets again when I found some spare time today. It easily hits 55 MPH now and doesn't pop as much. Going to do some fine tuning this weekend.