96
3D printer nightmare fuel: Bambu X1C and P1P started printing while owners were asleep
(www.theverge.com)
this post was submitted on 16 Aug 2023
96 points (97.1% liked)
3DPrinting
15570 readers
206 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Makes me very glad that my printer has a power supply with a big clicky hard-cutoff switch that only gets turned on when I intend to use it.
Yeah but now you have a smart plug in your house.
Is the smart plug company going to turn it on in the middle of the night? You've just moved the problem from one closed, proprietary technology to a different closed, proprietary technology.
Not all smart plugs are proprietary. You could even make one yourself with an ESP-01, a relay, and open-source firmware like ESP Home if you know what you're doing to make it safe at that kind of voltage. If you're overconfident in your ability to make it safe, then you've still got an untrustworthy smart plug at the end of the process, so it's not necessarily a good idea, but it's not proprietary.
Hmm that's a good point. Never seen one for sale that I trusted though, and I did have a good look at one point.
There are many that can be reflashed with open source Tasmota firmware. Sonoff is one of the popular ones.
IKEAs Trådfri plug can be adopted into anything that supports Zigbee. Works out of the box with Zigbee2MQTT. No flashing required.
Don't use wifi smart stuff. My house uses zigbee, so you have to be physically close to interact in any way. That really narrows down bad actors.
I've got my smart plugs on Zigbee, through Home Assistant, so they're not on the cloud. But that did require some research so I could get the right devices, because it's a bit of a minefield trying to find smart devices that don't need to be cloud based.
You don't even need a pi for this option. I'm running octoprint off an old android phone and it works great.
These printers come with that too. Just most didn't have it turned off overnight when this happened.
They should have it turned off because the Bambu lab printed have been tested and shown to draw much more power when idle compared to other printers. It's not much but overtime it adds up.
Same :)