ErgoMechKeyboards

5829 readers

18 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

EMK wiki
Split keyboard compare tool
Compare keycap profiles Looking for another set of keycaps - check this site to compare the different keycap profiles https://www.keycaps.info/
Keymap database A database with all kinds of keymap layouts - some of them fits ergo keyboards - get inspired https://keymapdb.com/

founded 1 year ago

MODERATORS

is dactyl manuform having hot-swap function a good idea? (lemmy.world)

submitted 1 year ago by dactylmanuform@lemmy.world to c/ergomechkeyboards@lemmy.world

4 comments fedilink hide all child comments

I have do some research about doing dactyl manuform, and I see people mostly solder directly diodes and copper wire to the switch. So i want to know that if i build dactyl manuform with hotswap function, will there have some problems which can kill my board? And when comparing handwired and hotswap. which is easier to do if i'm a beginner? And another question: is reset buttons neccessary for this build? (because i saw many guides are always including this component)

you are viewing a single comment's thread
view the rest of the comments

[–] nydas@lemmy.world 3 points 1 year ago

If you use hotswap, you’ll need something solid and immovable to mount those hotswaps to. That’s generally the pcb, as they both slot in and get soldered on. So you’d need to have a pcb with hotswaps that could work on a Dactyl, and a way to mount it so that is was stable and would take the pressure of pushing in a new switch.

Amoeba Kings is a per key pcb. I have one I built in my git that is choc spaced with RGB too. But you then have to solder each of these together, and attach them firmly to the case. So it would certainly be more work/effort/planning than simply hand wiring.