this post was submitted on 09 Aug 2023
156 points (99.4% liked)

3DPrinting

15548 readers
268 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
 

It seems that most of the drywall mounts that I looked for printed in a vertical orientation, which is not good for strength.

For once, I didn't reverse engineer anything to design this. Lulz.

https://www.printables.com/model/548516-printable-drywall-mount


Update 8/10 - Added dimension sketches, Added .step file, Added a thinner support ring option that will sit more flush (but not completely)

you are viewing a single comment's thread
view the rest of the comments
[–] Semi-Hemi-Demigod@kbin.social 4 points 1 year ago (1 children)

I bet these would also work in masonry

[–] remotelove@lemmy.world 2 points 1 year ago

They expand quite a bit and the little tabs are intended to dig into the drywall to keep the assembly from rotating while it the screw is set.

I suppose you could cut the little tabs off and not use the ring and it would still work. It may be problematic since the main anchor bit is split in half.