3DPrinting

15276 readers

58 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

j4k3@lemmy.world

andypiper@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee

Voxelab Aquila - BLTouch Upgrade - Did someone here already do it? (lemmy.world)

submitted 1 year ago by Gorroth@lemmy.world to c/3dprinting@lemmy.world

15 comments fedilink hide all child comments

Hello everyone!

I am dealing with a slightly warped print bed. Smaller prints are no problem and come out absolutely perfect (for me), but as the prints get larger and go near the sides of the printbed they won’t stick very good, because the bed is a bit more away from the nozzle on all sides, causing my prints to warp or even fall off the printbed.

So now I am thinking about upgrading my Voxelab Aquila with a BLTouch (or similar) to get rid of that problem. So far I read you could use Voxelab‘s Aquila X2 BLTouch Firmware with the standard Aquila?! Is that true? Does someone here know it or already upgraded one? Or maybe have a link to a tutorial?

Any help appreciated! Thanks in advance :)

you are viewing a single comment's thread
view the rest of the comments

[–] Gorroth@lemmy.world 1 points 1 year ago (1 children)

Thanks for all this information. Very interesting! Do you have a link to that firmware or a name I can search for? I have no problem with manually leveling, I just need to be able to tell my printer where the highs and lows of my print bed are if you get what I mean.

No I don’t think that. In my case it just looks like the plate (the one unter the printing surface that heats up) seems to be bent even in disassembled state. And yes, I don’t really need another instance of frustration, that hobby brings enough of that along its way :D So if I can do it without a probe I might give mesh leveling a try.

I am using a PEI print bed. I had a glass one before, that i had nearly the same problem with (but never tried this big prints, so it didn’t actually bother me).

[–] thantik@lemmy.world 1 points 1 year ago* (last edited 1 year ago) (1 children)

I literally gave you instructions with the name of the firmware my dude...

If there's a build of Marlin for your machine, check the bed leveling section in the source code, and enable "Manual Mesh" leveling.

Marlinfw.org

A quick search on github gave me this: https://github.com/shadow578/Marlin-H32

Honestly though, you're better fixing the mechanical issue you have with the machine.

[–] Gorroth@lemmy.world 1 points 1 year ago

Oh my… sorry, it might have been to early for me to read your comment, sorry. Will have a look at it, thank you!

I am already trying to fix it mechanically, but I need a Plan B, that’s why I made that post :)