this post was submitted on 12 Jun 2023
25 points (100.0% liked)
Technology
37699 readers
256 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I highly recommend PC Partpicker for compiling all your components (although I don't typically follow the listed purchase links). The comparability checker it has can save some real headaches!
Otherwise, some general advice:
Remember the motherboard standoff screws. Most cases these days have them pre-installed, but my first rig did not. And I bent the mobo a little bit before realizing my mistake. It still worked in the end, but it's now my #1 cautionary tale about PC Building.
Do yourself a favor, and make an attempt at proper cable management. It'll make replacing components so much easier down the line.
Get a fully modular PSU (if in your budget). This will help with #2 above immensely.
Read the manual that comes with your motherboard. It usually has a lot of guidance for assembling the computer, especially if this is your first time.
Have fun! PC Building/Gaming is one of my favorite hobbies, and I'm always glad to see new people getting interested in it!
Good luck, and don't be afraid to ask questions!
This is all spot on advice. The motherboard and case manual should be open and nearby as you build the pc.