this post was submitted on 21 Jun 2023
4 points (83.3% liked)

3DPrinting

15548 readers
221 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
 

I got myself a tungsten nozzle, thinking it would last forever…

Today I tried to clean it with a needle (learning after about many suggestions not to do so) and the needle snapped inside the nozzle, quickly fusing to the clog…

I’ve tried blasting it with a kitchen torch, without success at loosening this thing. Any tips?

Thanks!

you are viewing a single comment's thread
view the rest of the comments
[–] nyan@lemmy.cafe 1 points 1 year ago

Heat gun. One of more powerful ones used for stripping paint, not the cruddy ones for heatshrinking. You need to get the nozzle hot enough to soften that clog to have any chance at all of clearing it, which means you're going to have to get it up to the kind of temperature you'd be printing at. Put the nozzle in a vise while you're doing this, so that you don't touch it and burn yourself, or drop it and set something on fire.

I have a sneaking suspicion you're going to have to chalk this one up to "lessons learned" and get a new nozzle, though.