TL;DR No.
What you should do:
- buy fresh IPA. It is approx. $5/L. As such a 2L washing bin is approx. $10 + 10L waste disposal. In the broader picture of total costs and production value, this is manageable (resin cost, machine depreciation, PPE/gloves, ...)!
- use two or three stages of washing
- fill the washing containers with as little as necessary to get it done
- periodically expose the liquid to sunlight and let the particles settle down. Separate the "clean" liquid from the sump (you might add special chemicals to speed up this process).
- if the first stage needs replacement: 1.) responsible disposal of the liquid in compliance with local regulation 2.) move the liquids around: (the third stage is the new fresh liquid, the second is the prior third stage and the second washing station is now the first "dirty" stage).
- check for alternative chemicals that can be used with your particular resin
If you use water-washable resin: IT IS A DANGEROUS LIQUID! Dispose of dirty water responsibly as chemical waste.
Long answer:
To answer that, let's first look at what isopropanol (IPA) is: Its formal name is propan-2-ol and its CAS number is 67-63-0.
As a starting point, check a database like GESTIS (German) and NOT wikipedia: https://gestis.dguv.de/data?name=011190
At the top of the page we see that it has GHS-02 and GHS-07 warning labels. Looking further, it is a colourless liquid with a flash point of 12°C and an ignition point of 425°C. The explosive range is 2-13.4% vol. The signal word is DANGER.
Scrolling down:
The substance forms explosive peroxides.
What does this mean?
There is no mechanism mentioned, but generally, if you expose these chemicals to sunlight they will react over time to form a peroxide, which is much more reactive and can explode at high concentrations (there are exceptions to this rule, but most of them go boom).
This means for distillation:
- avoid "old" IPA if possible
- check for peroxides (if necessary, treat the peroxides before distillation)
- don't distill dry (leave some liquid in the sump to avoid high concentrations of peroxides)
As I believe this shouldn't be done at home I won't tell you how it can be safely done (if this isn't enough to deter you: read scientific literature/books describing how it shall be done).
Instead, focus further on what advice is out there on the internet/YouTube:
- A water distiller is made for water and water isn't flammable and doesn't form explosive atmospheres. In other words they are unsafe for Isopropanol or Ethanol.
- Do you think a 2kg fire extinguisher is enough? Are you truly capable of thinking rationally when there is a fire or would you panic like most people?
- Don't even consider doing it indoors or in a garage.
- Don't work with large volumes. In a laboratory with proper fumehoods and equipment, there might be limits like 500mL batch sizes.
- If somebody isn't wearing eye protection or heating large amounts of liquid without stirring question his qualification to talk about this topic. Being an influencer or posting online, like this post, doesn't require any formal qualification as such even the big YouTubers/influencers post horrendous content that is dangerous or misleading.
Shit just even for filament printing, there's some solvents that get thrown around online that yeah, you really shouldn't use in a home setting, it's really easy to get things like MEK, which work, but starting to get into nasty territory for stuff that will dissolve filament.
Most people do not have adequate ppe or ventilation to deal with chemicals at home, or a fire cabinet, or even know how to find an SDS.
Semi related, lithium batteries are straight up terrifying, primary cells more than rechargeables, but same idea, I honestly hope no one ever gets to experience an actual full on cell failure, I avoided them thankfully but heard stories of just how much energy is released in even one C or D sized cell going.
On the composite filaments, abrasive filament sure sounds like a great thing to make wear surfaces out of! There's a list if things that idk if I'd print, and that'd be up there, ots oil bronze bushings are like, a buck, maybe 2? And they'll last a hell of a lot longer.
People in the office next to mine deal with prototype lithium cells and yeah, terrifying. They charge them in a special fire cabinet in case they go pop, and have buckets of sand everywhere (although the official advice is to not bother, gtfo). If you plot energy density on a line, there is an overlap between the highest density lithium cells and lowest density high explosives
Most people are moving torwards glass- or carbonfibre filled materials for one reason or another (e.g. asthetics). If the 3D-printed part contains a bushing than it is the same material. Often it is enough to just stick a metal rod through it. No need to worry about sourcing and installing bushings.
Also for the Igus materials (e.g. Nylon with PTFE) it is a composite. Anyway. If you have a real need for a high endurance than you can't 3D-print. Injection molding is king and if this isn't possible at least use a hybrid manefacutring (additve + subtracte) to get the appropiate surface finish and tolerances.
Was more a thought about if you are concerned about micro fibre particulate (what I took from your post, sorry if I misunderstood) plastic on plastic or plastic on metal are fine for sure, maybe a little exaggerated. Do wonder though about the wear of 3d printed bushings, surfaces won't be smooth, some of the glass filled nylon I've used has almost a soft surface to it, it's really hard to describe, some post processing though would probably make my (mild) concern moot though so.
Wrt composites hobbyist/prosumer grade manufacturers (some that target engineering customers in that bucket too) claim they don't experience the same warping or shrinkage in general, whether or not that's true I don't have enough information to tell you unfortunately. Have found both common types definitely have more rigidity, I use them in places where that really matters.
It's pretty common to see cheap bearings in 3d printed parts, actually mildly interesting to me that bushings don't seem to be, at least at the hobbyist level. To go further, how many designs do you see with heat set inserts or pressed in nuts?
Heat set inserts are an interesting topic. You don't need them if the screw is only installed once. Sure enough you can drive a metric screw into a 3D-prind and form/cut the threads but better are self tapping plastic screws. For nut vs. insert: It depends. if you can get away with a square nut (e.g. DIN 557 | don't use hex nuts like DIN934) they are quicker to install. Make the cutout slightly undersized so the nut is fixed/wont move when the screw is installed.
If you use inserts consider the flange type to get a very nice aesthetic: e.g. https://de.aliexpress.com/item/1005006135129074.html
Removable plastic rivts are also a great fastening option. Push pins with integrated spring are equally briliant. Parts with snap fits are awsome but very diffuclt to design as the tab needs to flexible to be pushed in place but still strong enough to not break (layer adhesion).
Warping is indeed a big selling point for these materials. Major selling point/driving force I belive is still the esthetics of them as they provide a surface finish which can be sold (without post processing) without looking like a FDM 3D-print. Less warping, improved properties is more of a nice to have for most applications.
This can be sad about a dozens of constructions. ISO1234 /DIN91/GB91-2000 splints are everywhere in the industry but nobody in the hobby space knows about them.
For bushing vs. bearing: It always depends on the application and industry.
Talked a while ago to somebody that run studies on FDM printed bushings. The verdict was that print orientation/layer adhesion was a limiting factor with their setup.