3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
Number one priority is safety.
SLA Resin contains chemicals that are safe if handled appropriately and a serious health risk when no precautions are taken.
First of all apply the common rules for chemicals like separate workspace, no food and drink around it, minimizing exposure as best as possible, and not working with them if the available material/workspace is unsafe.
Resin in particular has two noteworthy exposure paths: 1.) Vapors -> well-ventilated space. Ideally a fume hood. This will be the largest challenge and might be the biggest investment. One option is to work outside and only go near it as little as possible. Not great but good enough to achieve a low exposure. 2.) Skin contact -> safety googles, long clothes, closed footwear and gloves. Keep in mind that a glove is only spillage protection and up to 1.5 gloves in a 100 box can be damaged! Use tools to handle the uncured resin parts.
Due to the hassle of working safely with it, I have quit SLA 3D-printing and use online services for it (eg. JLC3DP).
How to print?
Experience. That simple. Try, fail, and repeat.
Watch a video on how to setup the printer. Print the exposure test pattern. Go from there.
For a booklet take a look at the Prusa SL1 guide and post/ask if you encounter a specific issue (writing everything down that is to SLA printing would take hours): https://www.prusa3d.com/downloads/manual/prusa3d_manual_sl1_en.pdf
I believe SLA parts also require drain holes for the resin on the inside of the part to drain out through?
Yes and if the part isn't hollow use the slicer to make it hollow.