Coffee

I’ve been pretty happy with my home setup for a while. I have progressed from the Sage Barista Express to the Sage Oracle and never had any issues at all. I recently bought a hand grinder for when I have a speciality blend or am on the road and so purchased a KinGrinder K6. I have found that it is actually a lot better than the grinder built into the Sage.

I am now looking at upgrading to a separate grinder and maybe swapping to a more manual Espresso machine also.

I have looked at Niche and Eureka as well as the Df83 grinders but honestly am a little lost. I only drink Espresso based drinks and am UK based.

I have also looked at the La Pavoni and Eureka machines for Espresso.

Just really looking for some guidance. I have an independent coffee roaster that I get my beans from and like a darker roast and am happy with what I get. I very rarely change blends or if I do I switch between one or two blends.

Lately I've had some obviously inaccurate measurements from my Timemore Black Mirror scale. That would happen occasionally but not always. I was charging it today and as luck would have it, I was sitting beside it. I typically charge it unattended. I noticed that it took a very long time to charge and multiple times it seemed to restart charging. I grabbed it to check the cable and noticed it was quite warm in one spot. I though - that's alright, it's likely where the battery cell is, it's charging, lithium cells get warm during charging. Later I took it off the charger and while handling it I examined the hot spot a bit more. I noticed that when I squeezed the scale at that corner, the top plate wouldn't sink towards the bottom as it does in the other corners. A few mental calculations later I figured this could be a swollen cell that has grown so large that it impacts the plates and doesn't let them come together as they do normally. I took it apart. Lo and behold this spicy pillow:

The marking on it means it's supposed to be 8mm thick. It's currently closer to 12.5mm. Removing the battery allowed the two plates to come together in all corners as normal. That confirmed the hypothesis. Further, the reason why it only occasionally impacted the measurements is likely due to the weight of the cup I was using. When using a lighter cup, the total weight would be lower than needed to get the two plate to touch the battery and produce inaccurate measurement.

I ordered this as a replacement. It fits the dimensions and it's got some safety certification.

To check if your scale is a fire hazard, squeeze this corner:

Normal squeeze action looks like this. Unfortunately I didn't record a video prior to removing the battery.

If it the two plates come together as the do in the other corners, you're probably okay. If the plates don't come nearly as close, you've got an unlit petard in your hands.

I'm currently looking to replace my gaggia classic. I don't want to upgrade. I want to replace it, so I just went to eBay thinking I could take my pick of hundreds of machines, but I was surprised to find none at all.

Where else do home baristas sell their gear in the EU? I'd rather not import one from the UK or US

• 40 grams of coffee ground fine to medium fine.
• 24 hours in the fridge.
• Filtered with an Aeropress allowing it to naturally drain, and then filling the Aeropress with fresh water to rinse the grounds and drain again.
• This clip shows the press pushing the remaining coffee through after draining twice and the previously drained coffee poured on top.

I had never really thought about using an immersion brewer as a pure pour-over device but just had a mind blowing honey process Ethiopian, and I noticed barista was brewing it in a Hario switch with the switch open the whole time. Tasted as good as a v60 brew to me. I've been wanting to try immersion brewing for a while. I get the sense this forum and many others lean more strongly towards the clever dripper. I imagine that device could also be kept open and used as a pour-over. Do you think an open Hario switch basically IS a v60? That sounds like the ultimate multi-Tasker to me. Am I missing something here? Any thoughts on the perceived lean toward clever? I've ruled out the plastic version and would be looking at glass clever vs switch.

I mostly do drip coffee (shh, I'm basic), but I'd like a more consistent, fresh brew, and potentially something that could do an espresso grind, as well.

I've seen good things about the Capresso Infinity Plus, but thought I'd ask about the personal preferences from more experienced folks here.

It'd be lovely to have something that can easily fit on the counter, and with a simple mechanism and/or reparability (even if that means looking for old stock of a certain model).

Thanks!

Anybody else in Denver tune their water for brewing? Denver city water is insanely hard. I'm using a simple two-phase under-sink filter since I live in an apartment, but it doesn't touch the hardness problem. I've also read the city has drastically changed the pH to reduce lead leaching from old pipes.

I'm about to pay for water testing to see what I'm getting out of the tap and measure how much I'll need to adjust, but was curious if anybody else had numbers.

with Google's assault on Invidious leaving it inoperable, consider watching this video with FreeTube, a nifty open source program that lets you watch youtube videos privately!

Combined with Libredirect, which automatically opens youtube links in Freetube, it becomes really slick and effortless to use.

For Mobile, consider giving FluxTube a try.

In our house, we generally go for variety in our coffee beans. That means when we are finishing one bag, we're going to open a different bag with totally different beans inside.

What do you do if there aren't enough old beans to make a full serving of coffee?

It may be heresey, but I mix the final old beans with a few beans from the new bag and call it my "bonus blend".

Finally, AeroPress made of glass and metal, came out. Its double-walled design should reduce heat loss.

Price: $149,95.

Official site

Was introduced on Williams Sonoma first

Picture driving home after picking up a 12oz bag from a local roaster I haven't tried before. The entire car smells gloriously of Carmel and peach. The aroma is powerful and invigorating.

Pan to Me only thinking, "damn that is some piss poor packaging"

I usually prefer to just store beans in oem bag with a good bag clip. I've tried other containers and feel like it's typically no better or worse. Going to throw a ziplock around this one.

Any other favorite storage methods?

I've been using James Hoffman's recipe since I bought AeroPress, and I was pretty satisfied. While being simple, it produced rich, balanced cups of coffee for both light and medium roasts. I was happy with it. But then I started noticing that some light-roasted coffee was too bitter. It rarely happened, but when it did, it wasn't possible to get rid of that excessive bitterness. When I tried to increase the grind size, I got watery, but still too bitter coffee. At first, I thought there was something wrong with the coffee beans, but then I thought, maybe immersion brewing was just not suitable for them. So, I decided to find another recipe.

I wanted to try a hybrid recipe containing a percolation phase, as I believed it could produce more balanced cups. So I searched on the Aeromatic app and found a recipe from The Real Sprometheus. It has a long percolation phase and quite a short immersion phase. And this recipe fixed my coffee. I got a balanced cup without excessive bitterness and with more detailed acidity. Now, this is my recipe to go, as I think it's superior to James Hoffman's recipe.

The civet processed beans? I'm wondering if it's all hype? Or worth buying a bag to try?

Edit: Thanks for the responses everyone! I'm gonna pass on it 👍

My wife and I go through about 4lbs a month using mainly Chemex and Areopress. Used to get (decent) crummy coffee at Aldi and Grocery Outlet, occasionally splurging for local roasts at the coffee shops. Still, I calculate that's about $35 or so a month on beans, Chemex filters should probably be calculated with how pricey they can be - napkin maths say $11 roughly for a months supply.

$46USD ain't bad compared to my other vices 😪

Curious to hear if I'm around the average spender or how it tracks! Maybe you have some tips on cheap but amazing coffee? I wouldn't know unless I asked y'all

I've just reached the point where'd id say I have full control of the process (just bought a grinder, kettle has temp, I've got an accurate scale)

I've got a basic understanding of how for example water temp affects the taste, but not how to combine the right grind size with the right temp with the right beans at the right ratio

I do pourover

thank you all

To my coffee drinking friends in the American East (and elsewhere): I'm curious, has third wave coffee arrived? Did it get lost in translation?

Here's why I ask: I picked up some coffee in Boston recently, and I am shocked, shocked! I say, by the definition of light roast that seems to be in play. First, a pricey bag of venerable Gesha Village Estate by esteemed roaster George Howell. It's sold and labelled as a light roast, right in the middle of the light range. It is clearly a solid medium in colour, flavour, and bean hardness. Who am I now, to argue with George, but, here's the kicker, it tastes like a medium roast, that is to say, chocolatey-burnt. Not ruined exactly… well, a little bit ruined. I can see these beans being to somebody's taste, but any delicate flavours they might have had, those are lost to the burning, and to call them "lightly roasted," that's just wrong.

I was ready to write this off as a miscommunication or something, but next I opened a bag of Fogbuster "Blonde Bombshell" so light, you won't believe how light this is, but brace yourself for an explosion of flavor. I'm just reading the label, here. I have never before personally handled a bean as dark as this one. They are dark. Caliginous. Stygian. Oily dark. Toss 'em in the waste heap dark, because I don't want to have to clean my grinder from the oleaginous coating these poor, distressed beans have had forced upon them.

More than that, these beans are even darker on the inside. Fogbuster somehow injected more dark in the innards, after making the outards dark and shiny like I don't even want to touch. What these things must taste like; I'm not even curious.

A serious question then: what constitutes a light roast in Boston? Did I just get twice unlucky?

Am currently sick with a bad throat. While enjoying my cup of coffee, I had the thought; "Should I avoid coffee if I have a bad throat?". So, are there any studies or general consensus on this?

https://archive.is/GH0VK

I'd like to experiment with a drip assist tool. Currently looking at Melodrip vs Hario v60 drip assist. The Hario is much cheaper, and I like the idea of not having to tie up both hands. Of note, I have been using less of my Chemex and more of the Orea big boy for multicup brews. It looks close, but I think the Hario drip assist might fit on big boy without falling in. Do you all think that these drip assists will have a bigger or smaller impact on these bigger multicup brews? Is channeling a real concern with the Hario and a bigger brew bed? What if I just rotate it between pours? How much are you adjusting grind size for these?

What's your opinion about adding chicory to coffee? I know there's a few places, like Café du Monde in New Orleans that offers coffee with chicory. It's also sold as a mix in grocery stores in France.

I started trying it recently by adding a small teaspoon to my coffee in my French press and it gives a really smooth brew.

What do you think? Are you a purist? Have you tried it? What's your opinion?

Hi all,

I've got an uncoated aluminum boiler to replace the flaking one in my Gaggia Classic Pro Evo. Given that aluminum boiler coupled with the brass group head will cause galvanic corrosion, what are my options?

I know I can wait for companies to get chrome plated group heads in stock, but I hear the new (since April) GCP Evos are using the brass group head and the uncoated boiler. How are they pulling that off?

Thanks.

Some time ago I commented that one of my favorite ways to brew coffee is on a moka pot which I then aeropress to clean out the particulates. Many responded that they just put an aeropress filter on the moka pot for the same results. So, I tried it. The resulting brew is VERY different and, to me, not good at all.

It seems that the aeropress filter in the moka pot is removeding the brew by requiring more pressure to boil over. The result is a bitter brew that loses any subtlety in flavor.

If you are someone that uses the "filter in pot" method, please try brewing the cup unfiltered and then pressing it. Let me know what you think.