aprentic

joined 1 year ago
[–] aprentic@lemm.ee 1 points 2 months ago

I don't know. The 6 finalists that we know about were all white males but we can only speculate who she interviewed to get down to those 6 finalists.

While it's always a reasonable guess that a white male's identity played a role in their hiring process, we don't seem to have any evidence to support it.

Calling someone a "DEI hire" doesn't just mean that they're a different race than other people in an organization. It's used to imply that the person is otherwise unqualified for the job and was specifically hired to fill a diversity requirement.

I don't think that's an accurate description of Walz and I'd do some pretty serious eye rolling if MAGA starts trying to portray him as such.

[–] aprentic@lemm.ee 1 points 2 months ago (3 children)

He was clearly chosen for the votes he's likely to bring in. That's smart strategy on Harris' part.
As near as I can tell "the media" spent a few days wildly guessing about who her VP pick would be and many of them where white males. There are many articles that predicted that she would pick a white male but I couldn't find any that argued that it should be a consideration.

[–] aprentic@lemm.ee 1 points 6 months ago (1 children)

Thanks. Those look like they're likes per post or comment rather than per user but it's pretty close to what I'm looking for. I'm gonna test that out when I get back from my conference!

[–] aprentic@lemm.ee 2 points 6 months ago* (last edited 6 months ago)

That's exactly what I'm looking for!

I'm gonna go test out Boost. Do you happen to know what API endpoint it hits?

update: It looks like Boost is only available on Android and I don't have one.

 

Is there a way for me to get a list of all the posts I've liked/disliked?

 

I'm trying to follow the instructions at https://blog.joinmastodon.org/2018/06/how-to-implement-a-basic-activitypub-server/

I get the error message: {"error":"Unable to fetch key JSON at https://<domain>/actor"}

The actor file is located at: /var/www/<subdomain>/actor

that contains:

{
    "@context": [
        "https://www.w3.org/ns/activitystreams",
        "https://w3id.org/security/v1"
    ],

    "id": "https://<domain>/actor",
    "type": "Person",
    "preferredUsername": "alice",
    "inbox": "https://<domain>/inbox",

    "publicKey": {
        "id": "https://<domain>/actor#main-key",
        "owner": "https://<domain>/actor",
        "publicKeyPem": "-----BEGIN PUBLIC KEY-----\nMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAnioC3W5cHbHLo+ln4QPm\n6EX1Ypvs5h+h47b5RwhF+2N84dSHXURUuA6a33+IlVqiO/3gGxIX+4MJuSDAxGZM\nWFDbuqDnHft2zWorKmIqyDzSSB/oMSqOVL8QV1KYWsCyhw9v2l5U6EIw2Z7u3Fc9\nW19dumK0ieL7CPME2dJGV5quBoa2AGg0D36XCp8hAWMXGUnlEcaqjyePJg9/quZn\no3W/+h5ujoUQG73SIUaJdsK16Q0E7o5N7JP7pqqE8p8pEXtpwXJJYE9y9ItTqvRS\na29xymyboCI6jSK+VTgjz1tj6W+EGQsPfka6t8Gq82NL00VxBEYb/eiEFuOSy4RL\ndwIDAQAB\n-----END PUBLIC KEY-----"
    }
}

I haven't been able to find out what that error means. Is it unable to find the actor file? Maybe I should change /actor to /actor/ and put the file inside that? If so, what should the filename be? Is it some problem with the public key inside the JSON? Is it mad about the newlines?

 

Continuation from: https://lemm.ee/post/10351499 (I think that's the right thing to do rather than necroing an old thread)

I've been following the directions in https://join-lemmy.org/docs/administration/from_scratch.html and I'm hoping to get some help debugging my nginx config files.

It seems that the instructions for configuring nginx have some bugs.

curl https://raw.githubusercontent.com/LemmyNet/lemmy-ansible/main/templates/nginx.conf \
    --output /etc/nginx/sites-enabled/lemmy.conf
# put your actual domain instead of example.com
sed -i -e 's/{{domain}}/example.com/g' /etc/nginx/sites-enabled/lemmy.conf
sed -i -e 's/{{lemmy_port}}/8536/g' /etc/nginx/sites-enabled/lemmy.conf
sed -i -e 's/{{lemmy_ui_port}}/1234/g' /etc/nginx/sites-enabled/lemmy.conf
nginx -s reload

I was pointed at a thread which suggests using something similar to the ansible configuration https://github.com/LemmyNet/lemmy-ansible/pull/90/files

but I haven't been able to get that working either. Whenever I try to connect I get an error page and the logs are full of:

127.0.0.1 - - [18/Oct/2023:19:53:51 +0000] "GET /api/v3/site? HTTP/1.0" 500 170 "-" "node-fetch/1.0 (+https://github.com/bitinn/node-fetch)"

and

2023/10/18 18:48:08 [alert] 73064#73064: *321837 768 worker_connections are not enough while connecting to upstream, client: 127.0.0.1, server: localhost, request: "GET /api/v3/site? HTTP/1.0", upstream: "http://127.0.0.1:8536/api/v3/site?", host: "44.205.105.157"

I found some other threads that suggest this is a problem with a loop in nginx.

These are my config files:
/etc/nginx/nginx.conf: https://pastebin.com/aN78drum
/etc/nginx/sites_enabled/lemmy.conf: https://pastebin.com/ZGywujAB
/etc/nginx/sites_enabled/lemmy_internal.conf: https://pastebin.com/5AXbvmPx

I think I remembered to comment all the changes I made.

lemmy and lemmy-ui resolve to 127.0.0.1 in localhost

mydomain.com is a dummy I own the actual domain and it's pointed at an elastic IP that's associated with the ec2 instance. Everything is on that ec2 instance.

[–] aprentic@lemm.ee 1 points 1 year ago

Can you elaborate on that? I'm not at all familiar with nginx configuration.

That was merged into lemmy-ansible on June 22. The instructions say to run:

curl https://raw.githubusercontent.com/LemmyNet/lemmy-ansible/main/templates/nginx.conf --output /etc/nginx/sites-enabled/lemmy.conf
# put your actual domain instead of example.com
sed -i -e 's/{{domain}}/example.com/g' /etc/nginx/sites-enabled/lemmy.conf
sed -i -e 's/{{lemmy_port}}/8536/g' /etc/nginx/sites-enabled/lemmy.conf
sed -i -e 's/{{lemmy_ui_port}}/1234/g' /etc/nginx/sites-enabled/lemmy.conf
nginx -s reload

Do you mean that I need to also do something like:

curl https://raw.githubusercontent.com/LemmyNet/lemmy-ansible/main/templates/nginx_internal.conf
--output /etc/nginx/sites-enabled/lemmy_internal.conf

[–] aprentic@lemm.ee 2 points 1 year ago

Happy to share my notes.

Holding off for a bit though. The changes I made seemed to move me forward but I'd like to confirm that my changes at least work for me before I start recommending them to anyone else :)

9
submitted 1 year ago* (last edited 1 year ago) by aprentic@lemm.ee to c/lemmy_support@lemmy.ml
 

follow up from: https://lemm.ee/post/9562431

I ended up starting over on a t2.medium with Ubuntu and Lemmy 0.18.5.

Still following: https://join-lemmy.org/docs/administration/from_scratch.html

I had to make a few adjustments but that got me as far as:

nginx -s reload

But when I try to point a browser at my host, I don't get a config screen, just a JSON doc. I haven't been able to find anything in the logs that seems suspicious.

The only thing I did notice was that "id", "inbox", and "outbox" all have the wrong value. They all use:

https://lemmy.[mydomain]

instead of

https://lemmytests.[mydomain] (which is the correct name)

@rikudou@lemmings.world Was super helpful on my last post. I hope I can invoke their favor again.

[–] aprentic@lemm.ee 3 points 1 year ago

Well hot damn. It worked!

Thanks.

Now I'm off to follow the rest of the steps. Wish me luck.

[–] aprentic@lemm.ee 1 points 1 year ago (2 children)

Thank you. I tried that and got:

curl: (7) Failed to connect to localhost port 80 after 0 ms: Couldn't connect to server

When I put the port number back in:

curl -I http://localhost:8536/api/v3/site

I get the same 404 errors, with different time stamps.

journalctl -u lemmy

shows the same thing. Entries like:

Sep 27 20:26:04 ip-172-31-44-10 lemmy_server[12299]: 2023-09-27T20:26:04.726387Z INFO actix_web::middleware::logger: 127.0.0.1 'HEAD /api/v3/site HTTP/1.1' 404 0 '-' 'curl/7.88.1' 0.000054

I assume that /ap/v3/site is dynamically generated and there isn't a location I can look at in the file system to make sure that everything is correct there, right?
The instructions have you create /usr/bin/lemmy, /etc/lemmy/lemmy.hjson (outside of stuff you download to the user directory) so I don't think there is.

17
submitted 1 year ago* (last edited 1 year ago) by aprentic@lemm.ee to c/lemmy_support@lemmy.ml
 

I'm working on an idea to improve comment sorting and I need to be able to get Lemmy running from source so I can implement and test it.

Right now I'm stuck on a fairly basic (I hope) problem.

I'm mostly following https://join-lemmy.org/docs/administration/from_scratch.html I'm running it on Debian instead of Ubuntu but I don't think that's the problem. (specifically a t2.small with the AWS Debian image). I'm also using 0.18.4 instead of 0.18.2. I also haven't (yet) done the possibly optional step of editing postgres config to allow password authentication instead of peer authentication.

Everything seems fine until I start Lemmy. After I run

systemctl enable lemmy; systemctl start lemmy

I try

curl -I localhost:8536/api/0.18.4/site

But I get:

HTTP/1.1 404 Not Found
content-length: 0
vary: Origin, Access-Control-Request-Method, Access-Control-Request-Headers
date: Wed, 27 Sep 2023 17:51:51 GMT

When I check

journalctl -u lemmy

It does contain:

Starting http server at 127.0.0.1:8536

There are still a bunch of things I'll be trying but I wanted to check if this is a well known problem with a simple solution.