this post was submitted on 22 Feb 2024
85 points (97.8% liked)

Astrophotography

1756 readers
1 users here now

Welcome to !astrophotography!

We are Lemmy's dedicated astrophotography community!

If you want to see or post pictures of space taken by amateurs using amateur level equipment, this is the place for you!

If you want to learn more about taking astro photos, check out our wiki or our discord!

Please read the rules before you post! It is your responsibility to be aware of current rules. Failure to be aware of current rules may result in your post being removed without warning at moderator discretion.

Rules




If your post is removed, try reposting with a different title. Don't hesitate to message the mods if you still have questions!


founded 1 year ago
MODERATORS
85
Sun (lemmy.world)
submitted 8 months ago* (last edited 8 months ago) by the0josh@lemmy.world to c/astrophotography@lemmy.world
 

Day 2 of owning a new (to Me) Lunt60 in preparation for the April 8 eclipse, first time posting here.

Lunt60 Single Stack+ ZWO 1600 Pro at 10C + Atlas EQ-G.

Acquisition in Sharpcap. 0 gain, 2.7ms exposure

PIPP: Cropping and centering

AS!3: selection of best 10% of 500 frames

ImPPG: deconvolution, sharpening, tone curve (inverted surface and stretched prominences)

Seeing, focusing, and pressure tuning were all suboptimal, but I'm still happy to have taken some data through the full process.

Comments and suggestions welcome.

top 7 comments
sorted by: hot top controversial new old
[–] bistdunarrisch@lemmy.world 3 points 8 months ago (1 children)

Wow this looks amazing. If you don‘t mind I have some questions.. I assume this was shot with an Ha filter to reveal the structure on the surface, otherwise it would be all white? Also what is the need of 10% of the images? Do you stack them? One exposure should have enough signal shouldn’t it? And last but not least what focal length does your telescope have?

[–] the0josh@lemmy.world 4 points 8 months ago (1 children)

Ha filter: yes, I used the Lunt60 which has two different filters, a tunable elaton that hones in on a particular wavelength, and another more broad filter that rejects the rest of the energy.

10% images: the general term is "Lucky Imaging" but imaging things through the atmosphere is subject to seeing, or that shimmery effect above the ground on a hot day. The air is moving so it turns the atmosphere into what looks like looking at the bottom of a lake while ripples pass by, hence rejecting so much data

AutoStakkert does some magic with multiple exposures that I still don't quite grasp yet.

My telescope is 60mm diameter, f/7, for a focal length of 420mm.

[–] bistdunarrisch@lemmy.world 2 points 8 months ago

Thank you very much for responding!

[–] KingJalopy@lemm.ee 2 points 8 months ago (1 children)

I've never directly looked at the sun so I'd always assumed it was in color.

[–] the0josh@lemmy.world 3 points 8 months ago

It puts out every in the spectrums we can and can't see. This was taken with a mono sensor and through a very strong set of filters so there wasn't really any color data to be had. That being said a lot of folks will add that classic orange hue that you see. I decided to stick to white.

[–] hansl@lemmy.world 1 points 8 months ago (1 children)

Looks too dark, might be at night.

[–] the0josh@lemmy.world 2 points 8 months ago

It was definitely night for somebody on the other side of the world :)