This is an UNOFFICIAL AVR community.
This is a community for people who use AVR microcontrollers. This can include Arduinos, Arduino clones, Arduino like boards, and stand alone AVR chips and self-designed boards.
NOTE: If your circuit is doing something weird when you touch a wire or move your hand across it see this pinned post.
This is a community for everyone who is interested in AVRs and Arduinos from beginners to experts, kids to adults, hobbyists to engineers.
You may also be interested in:
RULES:
All Lemmy.ca rules apply here.
Everyone (see rule 98) is welcome.
If you’ve seen a question 100 times answer it the 101st time or ignore it. Even better, write a complete, detailed answer and suggest that the mod(s) pin it to the community.
[Did you actually think there were 98 rules?]
If you present something as fact and are asked to provide proof or a source provide proof or a source. Proof must be from a reliable source. If you fail to provide proof or a source your post or comment may be removed.
Don’t be a dick. Yes, this is a catch-all rule.
The mod(s) have the final say.
I bought a few of these years ago. They are a small board that plugs into the back of a standard 1602 LCD board. They come with an ATMEGA88 which I changed out for an ATMEGA328P. They have a 74HC595 and a MAX232 to drive the LCD and RS-232 respectively. The LCD interface is SPI and it pulls all of the ports out to standard ETTEAM 10-pin box headers.
I find this form factor amusing and have tinkered with it but have never used this for a project.
