Home Automation

2912 readers

1 users here now

Discussion about general home automation ideas and projects, home automation protocols like Z-wave, Zigbee, Matter, etc, and home automation software and hubs like HomeSeer, Home Assistant, OpenHAB, Homey.

founded 1 year ago

MODERATORS

Moskus@lemmy.world

Dongle recomendations (lemm.ee)

submitted 8 months ago* (last edited 8 months ago) by fievel@lemm.ee to c/homeautomation@lemmy.world

3 comments fedilink hide all child comments

I want to get started with home automation, probably based on a raspberry pi (or as of now with my banana pi which is my home server) and either openHAB or home assistant. My goal is, first, to put some temperature/humidity sensors in varous rooms and leak detector in my basement where I had some issues with the main drain. I wonder if you have some recomendations for a usb dongle for zigbee and/or z-wave compatible with linux, not too expensive but good enough if I want to extend the network later. I read about SONOFF-ZB USB Dongle Plus Zigbee 3.0 available on Chinese websites. What do you think?

top 3 comments

sorted by: hot top controversial new old

[–] RunningInRVA@lemmy.world 3 points 8 months ago

For advice specific to Home Assistant, I would ask their community. It’s fairly active.

[–] fenndev@leminal.space 2 points 8 months ago

Just recently got the SONOFF-ZB Plus E dongle and it's been working well for me. I was able to flash it to use both ZigBee and Thread.

[–] kravemir@hometech.social 2 points 8 months ago

I am running Aotect Zi-Stick (ZGA008), but I would probably go with Sonoff ZBDongle-E, which is based the same EFR32MG21 chip, but has external antenna.

I recommend to use #Zigbee2MQTT because it's decoupled from home automation software:

- ability to switch software in future without repairing all devices in different software,
- no duplication of efforts to add device support in multiple softwares,
- ability to run (or evaluate) different software in parallel against the same Zigbee network.