Some boards that use the nice!nano have room to tuck a small battery (I think 110mAh) underneath the controller. If they use the 3 middle pins on the nano though, that's not an option. Rechargeable coin cells are an option, but for boards with the usual LiPO pouch cells, you'll probably want some kind of case. Some folks just use double-sided tape to hold the battery to the PCB but I'd rather have some protection.
this post was submitted on 14 Jun 2023
3 points (100.0% liked)
ErgoMechKeyboards
5845 readers
20 users here now
Ergonomic, split and other weird keyboards
Rules
Keep it ergo
Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)
i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²
¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid
No Spam
No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.
No Buy/Sell/Trade
This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.
Some useful links
- EMK wiki
- Split keyboard compare tool
- Compare keycap profiles Looking for another set of keycaps - check this site to compare the different keycap profiles https://www.keycaps.info/
- Keymap database A database with all kinds of keymap layouts - some of them fits ergo keyboards - get inspired https://keymapdb.com/
founded 1 year ago
MODERATORS
Batteries require management with control circuitry normally on the MCU. This means you need to pick MCUs that support batteries.
You will also want a on off switch for the battery somewhere.
I always use LIR2450 button cell batteries where I can. The steel body makes them more resistant to damage where as pouch cells can't take much of a scuff.
They're very portable! Just make sure the battery can't be smushed if the board itself gets some pressure, and that it can't get poked by sharp / conductive things.
ZMK for the nice nano and XIAO nrf52840 should even report battery life! Your primary half (generally left) drains faster than the accessory half.
RGB / screens that aren't designed for low power are utterly destructive to battery life. I get ~1-2 weeks on 120mah splits. With RGB I'm lucky to get an hour.
You don't change these batteries as they're rechargeable. Most boards will function while recharging. I offer QI wireless charging on my boards if you request it.
Searching for LIR2450 lead me to coin battery holder with on/off switch. I haven't seen a build with coin battery holders like this yet. I'm more curious now.
Thanks for the reply.