this post was submitted on 10 Nov 2024
9 points (100.0% liked)

3DPrinting

15590 readers
136 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
j4k3@lemmy.world
andypiper@lemmy.world
henry_rowengartner@lemmy.world
GrayBackgroundMusic@lemm.ee
9
Outer layer issues - Help fixing my print (lemmy.blahaj.zone)
submitted 5 days ago by Sparky@lemmy.blahaj.zone to c/3dprinting@lemmy.world
4 comments fedilink hide all child comments
 

Hey y'all, I've been having issues with gaps forming between the outer layers of the print walls, and I'm not sure how to fix that. I thought it might be because of a clogged extruder, but the issue didn't get fixed when I cleaned it. I tried adjusting the E-steps, but smaller values caused blobs of filament to form on the outer walls likely because lower values overextruded the filament. Apart from the weird top layer and walls, the prints turn out perfectly fine, so it might be a slicer related issue. The printer is an Ender 3 pro with a bltouch sensor and upgraded marlin board + octoprint.

Here are some pictures of the issue, and a screenshot of the slicer settings:

Any help is greatly appreciated :3

top 4 comments
sorted by: hot top controversial new old
[–] ExcessShiv@lemmy.dbzer0.com 7 points 5 days ago* (last edited 5 days ago) (1 children)

Looks like you need to calibrate extrusion multiplier, and do a proper calibration of e-steps first and not just adjusting values blindly based on print performance.

here's a great (comprehensive) guide

[–] Sparky@lemmy.blahaj.zone 1 points 5 days ago

Thx for the tip! I'll try to recalibrate it based on those instructions :3

[–] IMALlama@lemmy.world 2 points 5 days ago

That looks like under-extrusion to me.

Here's the quick "tune your extruder" arc:

  1. E-steps. Mark your filament about 125mm from a known reference point, extrude 100mm, measure again. What percentage of 100 did you get to? Adjust your e-steps accordingly and try again. You should never have to mess with this number ever again unless you physically change parts in your extruder. More detailed guide
  2. Temperature. Print a temp tower. Choose the temp that looks the best and offers good layer adhesion. Your filament will extrude differently based on your extruder temp
  3. Flow rate / extrusion multiplier. This will require more typing from me, but there are a number of ways you can generate test prints for this, so check the linked guide. More detailed EM multiplier guide.

After you get #1, never touch it again unless you change things like your extruder gears. #2/#3 are a good idea whenever you start a new roll of filament, although I personally don't bother unless I'm trying a new material, brand, or color.

[–] alwayssitting@infosec.pub 2 points 5 days ago

Try running a flow rate calibration in Orca slicer and adjust settings accordingly