NPD.
Actually, that day was several weeks ago. I've been putting off writing this all that time because I've been dreading doing so. You'll see why.
We've discussed the Majohn A1 and A2 several times in the past, up to and including my own previous take on the matter.
Did you know that there's an A3 now?
Well, in what's now apparently my ongoing quest to own at least one of every retractable fountain pen on earth, here it is.
This is the white variant, so chosen because I felt I needed to achieve the maximum level of irritation that's physically possible by attempting to take detailed photographs on a white background of an object that is not only also stark white itself, but also extremely glossy and all the parts of it that aren't white are mirror finished. Genius!
Anyway, the A3 is indeed yet another entry into the small but growing pantheon of retractable fountain pens.
As proof, here it is with the point retracted.
Like the A1 and A2 before it, the A3 is ostensibly a clone of a model from Pilot's Vanishing Point or "Capless" series, depending on what they're calling it this week. Except this time, the A3 is a clone of the new (ish) Vanishing Point LS. (Yes, the one that had that big recall.) I don't think you can buy the original from Pilot anymore, but there are a few third party retailers who allege to still have it in stock.
But instead you can have this right now for about $45. Jury's out on whether or not you'd want to, though.
The A3 is neither a click nor twist mechanism. Or rather, it's... half of both?
Just like the LS it mimics, the A3 has a strange and unique dual action extend/retract system where you click the long plunger on the end to extend it...
...But twist the knurled section on the end to retract it. You can't retract the point by clicking the plunger again, no matter many times you diddle with it. Unlike the previous click-action only pens the plunger stays pushed in when the point is deployed. And you can actually deploy it by twisting the tail end as well rather than clicking the plunger if you feel like it. But there's not a lot of point in doing so.
The action is... weird. The first thing you'll notice is that you turn the tail clockwise to retract the point, which feels backwards. I know why this is -- it's because the body unscrews in the middle in the usual righty-tighty fashion and this prevents you from unscrewing the body if you go overboard retracting the point. But it still feels wrong. Here's how it works:
Hark! For I have obtained a big sheet of black construction paper.
(Why didn't you take the rest of your pictures on it, I hear you cry. Good question, is my response.)
With a bit of practice it is possible to both deploy and retract the A3 one handed, but it's just not as convenient as a regular clicker pen. You have to consciously remember to twist the end rather than try to click the plunger again, but clicking the plunger is always the tempting default action because it's right there. It just doesn't do anything.
Pilot billed the original LS on its novelty factor, and it certainly has that. It makes for an excellent fiddle toy, but it's kind of annoying to actually use as a writing utensil.
That's because there's a major problem, and getting the point in and out isn't even the start. If you've been paying attention, you've already spotted it.
The clip is in the middle of the pen.
I have absolutely no idea why this is the case, because on the original Pilot the clip is mounted much further up, a centimeter or so from the nose of the pen. And that's how it is on the Majohn A1 and A2 already. So obviously they know how to mount a clip there, so why not copy the Pilot wholesale like they've done before, i.e. the correct way? Whoever was drafting up this thing must have just slammed an entire bottle of stupid pills that morning.
This means that if you try to pocket your A3 like a normal person, roughly half of its length is left sticking out. The point of balance winds up quite close to the top of your pocket hem and thus the pen tends to want to flip over even when by all rights you should have it securely stowed. It'll also tower well over anything else you have in your pocket and make you look like a colossal goober.
Yes, the clip is removable. As a matter of fact, it might be a little too removable. It just slides over the highly polished and tapered body of the pen relying on nothing more than its own spring tension to hold it in place. It's very easy to slip it down and off the front end of the pen, and as soon as you nudge it just enough to get it to let go from its rest position it'll take care of the rest positively leaping off on its own accord.
Even if you do remove the clip there's a square alignment and anti-rotation nub permanently molded into the body of the pen which will remain there, mocking you, forever. Theoretically this a concession for keeping the pen from rolling away when it's clip is removed, and it would be if it weren't for the fact that Pilot already built a fin into the rotating tail section for that exact purpose, and Majohn dutifully copied it. So the nub is in reality completely superfluous.
The A3 has an inset equatorial band that the head of the clip fits into. Here you can see the other major problem with the clip, which is that the anti-rotation nub has square corners which will snag on your shirt something fierce. The nub also rests in a hollow on the back face of the clip, positively ensuring it will be in the way 100% of the time. It is therefore practically impossible to actually clip the damn thing to your pocket in the first place. That means all the other complaints about the clip and everything else have to get in line and wait their turn until you can actually manage to get the blasted thing situated.
It is possible to get it done if you grab the end of the clip with your fingernail and lift it away from the pen body. But that's stupid. Even if Majohn had to use this idiotic clip system they should have at least chamfered the corners on the anti-rotation nub. There is no mechanical reason they need to be square to work with the clip itself.
So no matter which way you go you can't win. Either the clip will irritate the hell out of you, or you can take it off and be stuck with the left over nub annoying you forever instead. I guess you could try to grind it off, but good luck retaining the finish in that spot.
The Pilot Vanishing Point LS is billed as a "luxury" pen and thus the A3 is as well -- up to a certain extent, anyway, with Majohn positioning it above its peers with verbiage like "upgraded version" and "quiet and smooth operation." Here it is compared to an OG Vanishing Point (top) and an A2 (bottom). If you ignore all the mechanical details it actually does look quite nice from a distance. It's also much denser than the plastic variants of the previous A1 and A2 and feels like it should be more expensive if you judge it by the Jurassic Park Binoculars Method. The body is noticeably thicker and feels less hollow than the A2 despite still being made largely of plastic. It weighs a full 41 grams or 1.45 ounces, roughly twice as much as the standard A2 which is 20.8 grams or 0.73 ounces.
It actually even weighs more than a normal clicker model genuine Vanishing Point, which is 29.9 grams or 1.05 ounces. That's pretty remarkable considering significant portions of the latter are made out of brass. I don't have a genuine Vanishing Point LS to compare to, though, so I can't tell you how it stacks up against one of those.
There is a new "Majohn" script logo on the tail section whereas the previous models were completely unmarked. Maybe that's where the luxury is hiding. It's only silkscreened on, though, not engraved, so it'll surely wear off over time.
Inside, the A3 uses the same nib and cartridge carrier as the A2 and A1, which is itself a clone of the internals from the Pilot Vanishing Point. A genuine Pilot assembly is compatible with this and vise-versa, and the assemblies are also interchangeable between all three versions of the Majohn pens.
How does it write, then?
Exactly the same as every other Majohn pen.
At present the A3 is only available in an "extra fine" nib width. Majohn do make a normal "fine" nib assembly available and even sell the A2 pre-equipped with it, but not the A3.
The nib is plain stainless steel and is very rigid rather than responsive. Functionally no line width variation is possible. I measured the output of mine as 0.5mm if you press hard, and 0.45 if you don't. The difference is basically unnoticeable.
The point is a little scratchy, probably just owing to being so sharp. It will drag noticeably on cheap paper, more so if you tend to press hard when writing. It feels nicer on better paper with a finer grain, but ultimately this may be putting pearls before swine.
At least mine feeds just fine without skipping, even including the perfunctory few drops of Parker Quink I put in it just to test it out, and immediately syringed back into the inkwell because I hate this pen's mechanism and stupid clip so much.
Since somehow we've never looked at one of Majohn's nibs in detail before, here it is:
The nib is marked "Moonman." Moonman and Majohn are the same entity, and the Majohn retractables were originally sold in the West under the Moonman name but now they aren't. Search me as to why; this is one of those baffling mysteries of Chinese branding that may never make sense.
The nib itself is crimped to the feed and is functionally not removable. I've read of people accomplishing it and I suppose you could get the two apart if you inflicted enough violence on one or the other, but there's not much reason to bother considering Majohn will sell you an entire new assembly for $19.
The Inevitable Conclusion
Don't buy this. Get an Majohn A2 or A1 instead.
