Zed now has Linux support.
And then helix editor works with Go LSP, this is my current daily driver. Even without plugins, helix works better and manageable than vim/emacs. Only thing that doesn’t work is debugger.
this post was submitted on 04 Aug 2024
74 points (98.7% liked)
Linux
48368 readers
1140 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
If you don't mind, can you share your helix config?
Sure. https://gist.github.com/linusr/18cd6f8b0b059073460f0f3c322b8939
Includes both config & languages config.
much appreciated, I just can't seem to get mine setup right
You could consider something like LazyVim installed on top of Nvim so you don't have to configure it from scratch.
+1, I would recommend neovim with lazyvim. The documentation is excellent, and it's very easy to set up.
Pulsar is a fork of Atom under active development. We don't publish a flatpak (yet) but there is a community maintained flatpak for it.
Otherwise if you want to look at something else I'd give Lite XL, Lapce or even Zed (it has now been open sourced and looks like it has a flatpak available) a look as interesting alternatives.
I found emacs to be perfectly fine. Didn't need an IDE. Go compiler then was astoundingly fast--instant builds, basically. I think newer Go compilers are slower but generate better code. It would be nice to have a compile time flag to turn the slow optimizations on and off, like C compilers have.
Didn't need an IDE.
That's actually considered an IDE.
And, these days, runs leaner than vi for single-file editing from a dead start. It's weird but it's true by like 1%.
I thought Emacs was an OS? 😏
Distrobox will resolve your issue with VSCode and then some. Run archlinux, debian or whatever you want as a container. Then, install VSCode/VSCodium (and any other apps that Chimera lacks) inside the container OS. This will keep your development environment containerized and safely away from your host OS.
Why not just download a binary and/or make your own binary from the vscodium github page?
They've got a ton of statically linked ones to chose from that should be simple to just untar and run.
I would really prefer getting the text editor from flatpak or the system package manager for auto-updates, though I'm not sure if the binaries you mention also get auto-updates.
- Install nix.
- nix profile install nixpkgs#vscodium
- nix profile upgrade '.*'
Won't auto update but you could add the upgrade command to a login script or something.
Won't lie, nix has a high learning curve to get the most out of it, but installing a single app is pretty simple.
Codium auto updates itself, yes.
I’ve tried NeoVim but I really don’t want to waste time doing text-based configuration and messing with extensions just to get some basic features working.
This is the reason I switched to helix. Comes out the box with what you would expect so you dont need 10s of plugins and 100s of lines of config to get a base line experience.
Yeah, but what happens when you're too used to using Emacs with evil mode, vi mode in the shell, and (neo)vim for a long time? And now you have to start using helix and its own bindings. If there was a helix with full vim bindings (and plugins, for custom themes) support, I'd probably be using it right now.
I did not find it very had to relearn the difference in bindings. Quite a lot are actually the same but one big difference is the selection before action rather than vims movement then action. Which IMO I find the helix way nicer after using it for a while. Never really lost the ability to use vim either and I can switch between them with relative ease. Though I do miss the helix way of working when I am forced to use vi input on things.
I enjoy VSCode mixed with some Sublime (employer-provided) and Vim in some tmux terminal windows, but I tend to be an oldschool developer who doesn't really ask for much beyond good syntax highlighting. YMMV.
I think neovim with kickstart has out-of-the-box support for go, or if not, should be configurable with two added lines (add the treesitter parser and LSP). Unlike nvchad and lunarvim and stuff, this is not a "distribution" of neovim but a good starting point for a config that makes it easy to slowly learn how to add stuff and change stuff as you see fit.
At the beginning, you can add languages that you need support for pretty easily by adding to a list of LSPs and Treesitter parsers that should be installed; later on you can start adding and configuring plugins as you wish.
I'd say it sets you up about the same level as Helix or a little less than VSCode.
I use Neovim, specifically LazyVim. It's super easy to get up and running with Go.
I really love how LazyVim have support for a lot of languages as Extras. Once I needed Go formatting so, installed Go extra, restarted NeoVim and all was ready, in less than a minute!
What do you want an IDE to do (that a straight-up text editor wouldn't?)
I just need something that supports gopls and some basic features such as syntax highlighting, reasonable indents, code-completion etc.
- I've tried NeoVim but I really don't want to waste time doing text-based configuration and messing with extensions just to get some basic features working.
Have you tried any of the premade Neovim configurations like Lunarvim or NvChad?
Apart from that maybe something can be done with vscodium in a distrobox container or something, I haven't looked much into that.
load more comments
(1 replies)
You can use VS Code and Vim/Neovim for any language, as well as document writing and basic text editing. Just search for Go plugins
It shouldn't be hard to use either. If it is, you're doing something wrong probably
Helix or GNU Emacs, you can't go wrong
GVim is available pretty much everywhere? And it’s infinitely customizable.
It does have a learning curve, but then you get to use that knowledge for the rest of your life.
load more comments
(2 replies)
Just use vscode. It's basically the standard text editor for everything nowadays. Eventually you may want to start exploring vim/emacs but no reason to prioritise that now when all you need is something you can write code in that gives you squigglies when you do something wrong.
I use lite-xl, it has been very good, but I'm not a Go developer though.
They also release an appimage and I just did a quick test on a alpine container and it works, so it should work on Chimera as well.
lite-xl seems very interesting, but sadly I wasn't able to launch it on Chimera Linux (I get the error cannot execute command "./LiteXL-v2.1.5-x86_64.AppImage": No such file or directory on any shell I try to launch it with). Is this a simple problem I can fix, or should I run it with Distrobox?
That's interesting that it doesn't work, iirc the biggest difference of chimera is that it uses musl like alpine does.
Can you extract the appimage with --appimage-extract flag and run the AppRun that's inside of it directly? Or that also fails?
Isn't lite-xl in your distro repo?
load more comments
(2 replies)
Helix. It's modal like Vim but the defaults just work, and a quick "hx --health" will list every mode and what package you need to install for the language server.
I use VIM but I am not a Go developer
By chimera Linux, do you mean the gaming one or this one?
Just curious
I meant the latter. I don't really like systemd and I loved FreeBSD for its simplicity but also can't use it on bare metal because of a lack of drivers, so this seemed like a great option.
Wow, it's actually daily driveable? Mind linking me the installation docs, I can't seem to find em...
view more: next ›