this post was submitted on 15 Jul 2023
28 points (100.0% liked)
Technology
37727 readers
697 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Okay, I'm back and I have slept. Have a look at your CPU. I'm 90% sure that's where the problem was when I had this issue. I think in my case, one of the pins was slightly bent, and once it was very carefully straightened, the problem went away. But it could also be just not seated properly, or is overheating, or has dust on it.
Tried but did not work unfortunately
I saw in another post that you borrowed your partner's RAM. Is it possible for you to borrow their CPU (assuming it's compatible with your mobo)? If all the RAM is usable when you're using their CPU, that would point to your CPU having an issue, as there is the potential for a failure there that's not visible to the naked eye. If the problem still happens with your partner's CPU, then at least you've eliminated one possibility, which is useful for diagnostic purposes.
I'm inclined to agree that the CPU might have been set incorrectly / have a bad pin, especially after the black screen and BIOS errors after updating.
Unfortunate, but it happens to the best of us.