I'm in the process of building a PC and will be moving states next month. Ideally, I'd like to at least get it built and booted up before moving, because I'm moving to a more rural area without easy access to a MicroCenter or other store that sells components. It'll be a ~700 mile drive, the second half of which will be through smaller mountain roads. What is the best way to do this, so I can avoid damaging any components?
Edit: Thanks for the advice everybody, the consensus seems to be to remove and package separately the hard disks, GPU, and anything else heavy that sticks out from the board, then wrap the whole thing in towels and blankets and lay it on its back for the duration of the journey.
Remove your GPU, and basically anything that puts weight on the board. With a heavy enough air cooler, if you didn’t want to take it off, I’d probably try to lie it down flat and make sure it’s on something sturdy but soft like a couple towels. That would just mean that it’s not hanging the weight off the board.
I’m not entirely sure about glass sides, if you have it, but I’d take the panel off and keep it safe like you would a mirror. It should be fine either way but if the case flexes funny I dunno how that would play out. If you can’t make it work then it’s probably fine but that might be the best bet.