Cool Guides
Rules for Posting Guides on Our Community
1. Defining a Guide Guides are comprehensive reference materials, how-tos, or comparison tables. A guide must be well-organized both in content and layout. Information should be easily accessible without unnecessary navigation. Guides can include flowcharts, step-by-step instructions, or visual references that compare different elements side by side.
2. Infographic Guidelines Infographics are permitted if they are educational and informative. They should aim to convey complex information visually and clearly. However, infographics that primarily serve as visual essays without structured guidance will be subject to removal.
3. Grey Area Moderators may use discretion when deciding to remove posts. If in doubt, message us or use downvotes for content you find inappropriate.
4. Source Attribution If you know the original source of a guide, share it in the comments to credit the creators.
5. Diverse Content To keep our community engaging, avoid saturating the feed with similar topics. Excessive posts on a single topic may be moderated to maintain diversity.
6. Verify in Comments Always check the comments for additional insights or corrections. Moderators rely on community expertise for accuracy.
Community Guidelines
-
Direct Image Links Only Only direct links to .png, .jpg, and .jpeg image formats are permitted.
-
Educational Infographics Only Infographics must aim to educate and inform with structured content. Purely narrative or non-informative infographics may be removed.
-
Serious Guides Only Nonserious or comedy-based guides will be removed.
-
No Harmful Content Guides promoting dangerous or harmful activities/materials will be removed. This includes content intended to cause harm to others.
By following these rules, we can maintain a diverse and informative community. If you have any questions or concerns, feel free to reach out to the moderators. Thank you for contributing responsibly!
view the rest of the comments
Upvote for Type-F
The superior plug design
What makes it better over a type e? Personally i prefer type e, i dont trust the springs of type f :')
You can rotate F 180 degrees and plug it in.
What about polarity, I'm actually curious about that
It's AC. Polarity doesn't generally matter.
Bridge rectifiers are also not polarized to convert AC to DC.
In terms of physics, AC doesn't have polarities. Treat both the live and the neutral wire as if it were live. You don't know what kind of psychopath wired the building.
You can plug it in upside down?
Thats a fair argument that people have had issues with actually! Sometimes that is annoying but ive never had to much issues with it tbh
What's great is that it's also "backwards-compatible" with type E. Male type E plugs will usually also have ground connections for a type F, so you can plug it into female E and F sockets.
Edit: In fact, looking back at the picture, that's exactly the kind of male plug shown for both type E and F. It works with both types. It has the hole for an earth prong, but it also has a contact on the bottom side if you look closely.
I will say the comparability is amazing and a really good thing! The type f plugs are amazing. Nothing bad about more ground connections!
Just wished the type f sockets had a solid piece of metal, instead of the springs. Then they'd be perfect! :D
Type F plugs also works with the type E sockets. Superior.
Nearly, that's the type G
BS. Type F/Schuko is the USB-C of power sockets/plugs.
No fuse, no way
Why would I want a whole circuit to be cut because of a single device fault, and then have to spend time figuring out which device on that circuit actually has the fault.
Plus if a device only needs 3A it shouldn't be able to draw more
Usually that happens just when you plug it in so...
Dunno, if I have a fault in my home, I want it to be spectacular.
A couple of years ago I literally had massive blood pressure and walked like 2 km to go buy a box of fuses.
Burning two fuses, I figured out one of the extension strips was bad.
If I plug something in and half of my apartment goes black, TWICE, and needs a fuse replacement each time, maybe that thing needs to be tossed anuway. I'm no electrician, I can't troubleshoot a power strip. It has served its years. Bye.
Type G only exists because the British skimped on wiring after WW2 and needed to put a fuse in each plug for safety, hence the chonkiness.
Can’t rotate type G 180°. And since type F sockets are recessed, it’s just as unlikely to get shocked as with type G. Ground even connects first. And it’s directly compatible with type C and most type E plugs (since E&F usually share the same plug design, just the socket is a little different). What advantage would type G have to F?
The fuse: https://lemmy.world/comment/10644612
That’s neat. I can remember maybe one or two instances in my life, where that could have been useful. The rest of the time, I much prefer smaller plugs that I can plug in upside down and a home electrical network with good wiring.
Go watch any video comparing plugs and I bet the majority say Type G. It has so many safety features it’s unreal.
Which are only necessary because British houses are wired with a ring main. It’s a false economy.
Also, when it was created, most appliances were earthed. Nowadays, most things one plugs in are small electronic devices which don’t need an earth. Type G/BS1363 has no 2-pin variant, and even mandates a mechanical shutter to prevent a plug without an earth pin from being used. Which was great in 1947, but not so much now, when Europeans, Americans, Japanese, Australians and such have slender 2-pin plugs and economical sockets to put them in, while the Brits/Irish/HK/UAE are stuck with their enormous clownshoe of a plug.
I would have thought two pin plugs are easily to break. I’ve not broken a British plug in 40 years of life.
Anyway I’m not trying to debate this. There are plenty of resources online where electricians discuss the different plug types and the order is typically UK, Germany, and Australia.
What I'd like to see is apples-to-apples comparison of home and office safety between the different plug types. The data is sorta out there, but it's not normalized in a way that's convenient for comparison between countries.
On paper, yes, the North American plug is pretty bad, but will that show up in actual practice? There may be a case for changing it, but that needs a comprehensive study before going to all the effort to transition to a better design. Even if we had that study right in front of us, I can already hear conservatives complaining about Marxists electrical plugs.
That plug is only useful for a device that pays respects and nothing else.