this post was submitted on 05 Jul 2023
4 points (100.0% liked)

homeassistant

12080 readers
4 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago
MODERATORS
GreatAlbatross@feddit.uk
4
What trick am I missing with rtl_433 and MQTT? (feddit.uk)
submitted 1 year ago by GreatAlbatross@feddit.uk to c/homeassistant@lemmy.world
6 comments fedilink hide all child comments
 

I'm hoping it's just something stupid.

I've been playing around with rtl_433 for a while, and started making decoders for various bits of kit I have. When I run things on a laptop, with the same dongle, I pick things up no problem.

Yesterday, I tried to start integrating it with HASS. I installed this 433 wrapper, and Mosquitto Broker.

The 433 wrapper seems to work, and devices are decoded in the log when I use a generic config. But when I use one that pushes to MQTT, nothing shows up in the 433 logs other than the connection to MQTT, and nothing seems to be logged on the MQTT.

I vaguely remember reading that the simple Mosquitto broker only had a limited set of devices supported, but I can't seem to find where I read that now :|

you are viewing a single comment's thread
view the rest of the comments
[–] GreatAlbatross@feddit.uk 1 points 1 year ago

The decoders I'd hashed together were not very "proper" at all, just devices with chunks of the data interpreted as values.

What I should really do is figure out how to contribute them properly to the project as actual devices, then pull that in.