326
submitted 3 months ago* (last edited 3 months ago) by SoleInvictus@lemmy.world to c/youshouldknow@lemmy.world

I promise I'm not shilling for any of these companies.

I use the gluten free mix because of Celiac. We doubled the water and cheese and used it as batter in our stuffed waffle maker, filled with soft set scrambled eggs and more cheddar cheese. We used a heaping 1/2 cup of batter each for the top and bottom filling. The batter rises pretty quickly once it hits the cooking surface, so we'd press it back down as we were adding the fillings. It takes about 10 minutes to cook.

The mix comes with a herbed butter mix. After the waffle is cooked, we opened the maker, slathered each side of the waffle in the herbed butter, and closed it up again for about thirty seconds to let it cook in.

It's a perfect 5/7, highly recommended.

you are viewing a single comment's thread
view the rest of the comments
[-] SoleInvictus@lemmy.world 16 points 3 months ago* (last edited 3 months ago)

It basically makes a thick waffle, thick enough where it has room to encapsulate fillings too. The maker is like your standard waffle maker but there's a removable spacer with a handle between the sides. For these waffles, you put in about half a cup of batter, add your fillings, then add another half cup on top of it. Then you close the maker and flip it over.

After it cooks, you use the removable spacer to remove the waffle and release it onto a plate. I attached a picture I snagged off the Internet so you can see what I'm talking about.

We've had ours for a couple of years. I got it as a drunken impulse buy, so drunk me surprised sober me when it showed up. It has been pretty awesome. One of my favorites is plain waffle batter filled with fruit pie filling, topped with maple syrup and whipped cream.

[-] skydivekingair@lemmy.world 5 points 3 months ago

I’m just having trouble picturing how the spacer works without ripping the waffle apart when removed. Is it like a rod? Cause I’m picturing a ping pong paddle type spacer but that wouldn’t pull out, or are the waffle top and bottom not cooked together?

[-] overzeetop@lemmy.world 5 points 3 months ago

I’m pretty sure that middle bit is like a springform pan. The handle is not solid - you squeeze it to make it sit in the waffle maker but when you remove it, it opens a bit to release. I have no room for this in my kitchen but am intensely intrigued. I might buy a new house so I can get a bigger kitchen and have a place for this.

[-] SoleInvictus@lemmy.world 5 points 3 months ago* (last edited 3 months ago)

It's like overzeetop said, it's a ring with a split on one end and a springed handle on the other. It slides into grooves on the top and bottom sides of the griddle.

When the waffle is done, you gently squeeze it to get it out of the groove, in the progress gripping onto the waffle, then the ring portion will separate slightly when you let go. It's non-stick so the waffle typically just falls out.

I took a picture of mine. Don't judge, we haven't run the dishwasher yet.

[-] Lenny@lemmy.zip 3 points 3 months ago* (last edited 3 months ago)

Based on the picture it looks like the spacer is just a ring around the middle, and the top and bottom seal the whole thing up when you close it. As long as you’ve sprayed non-stick spay on all the parts you should be able to pop the top and then lift the ring out and extract the entire giant waffle in one go. Then, I’m guessing, the ring can expand near the handles to release the waffle, and then you lift it away.

this post was submitted on 04 Feb 2024
326 points (91.2% liked)

You Should Know

31302 readers
4 users here now

YSK - for all the things that can make your life easier!

The rules for posting and commenting, besides the rules defined here for lemmy.world, are as follows:

Rules (interactive)


Rule 1- All posts must begin with YSK.

All posts must begin with YSK. If you're a Mastodon user, then include YSK after @youshouldknow. This is a community to share tips and tricks that will help you improve your life.



Rule 2- Your post body text must include the reason "Why" YSK:

**In your post's text body, you must include the reason "Why" YSK: It’s helpful for readability, and informs readers about the importance of the content. **



Rule 3- Do not seek mental, medical and professional help here.

Do not seek mental, medical and professional help here. Breaking this rule will not get you or your post removed, but it will put you at risk, and possibly in danger.



Rule 4- No self promotion or upvote-farming of any kind.

That's it.



Rule 5- No baiting or sealioning or promoting an agenda.

Posts and comments which, instead of being of an innocuous nature, are specifically intended (based on reports and in the opinion of our crack moderation team) to bait users into ideological wars on charged political topics will be removed and the authors warned - or banned - depending on severity.



Rule 6- Regarding non-YSK posts.

Provided it is about the community itself, you may post non-YSK posts using the [META] tag on your post title.



Rule 7- You can't harass or disturb other members.

If you harass or discriminate against any individual member, you will be removed.

If you are a member, sympathizer or a resemblant of a movement that is known to largely hate, mock, discriminate against, and/or want to take lives of a group of people and you were provably vocal about your hate, then you will be banned on sight.

For further explanation, clarification and feedback about this rule, you may follow this link.



Rule 8- All comments should try to stay relevant to their parent content.



Rule 9- Reposts from other platforms are not allowed.

Let everyone have their own content.



Rule 10- The majority of bots aren't allowed to participate here.

Unless included in our Whitelist for Bots, your bot will not be allowed to participate in this community. To have your bot whitelisted, please contact the moderators for a short review.



Partnered Communities:

You can view our partnered communities list by following this link. To partner with our community and be included, you are free to message the moderators or comment on a pinned post.

Community Moderation

For inquiry on becoming a moderator of this community, you may comment on the pinned post of the time, or simply shoot a message to the current moderators.

Credits

Our icon(masterpiece) was made by @clen15!

founded 11 months ago
MODERATORS