this post was submitted on 02 Feb 2024
46 points (94.2% liked)

And Finally...

1080 readers
117 users here now

A place for odd or quirky world news stories.

Elsewhere in the Fediverse:

Rules:

founded 1 year ago
MODERATORS
 

This didn't seem quite serious enough for UK, but it's kinda neat.
Big Bad Wolf could not be reached for comment.

And as Insulation seems to have become my Special Interest at the moment, I dug into the material a little more.
It's supposed to be installed 400mm thick.
It has a transmission value of 0.12WMK. So 400mm on the outside of the house is equivalent to...150mm of glassfibre or 75mm of cellotex.

As it's vapor permeable, it shouldn't have any of the damp issues poorly installed insulation suffers from.

So, if you can get away with the look, and have the space outside, it's a pretty cool (/warm) material.

you are viewing a single comment's thread
view the rest of the comments
[–] LarmyOfLone@lemm.ee 6 points 9 months ago (7 children)

Hmm interesting. Is the straw compressed?

I wonder if you could encapsulate straw with fiber reinforced plastic. That would make it properly watertight for a tiny house. You could even vacuum seal it or replace the air with an insulating gas / CO2. And theoretically the straw could then work as something a bit like a core material. Something like 1mm fiberglass is only like 5€/m² so a combination of those two could make for one of the cheapest building material. Ideally you'd use basalt instead of fiberglass and a more eco friendly resin, but the encapsulated energy for a tiny house is so little it doesn't matter than much.

[–] Peppycito@sh.itjust.works 8 points 9 months ago (3 children)

The problem with encapsulation is that it's never perfect. Look how many boats have rotten decks (all of them, eventually) and realize a house is way harder to do compared to a relatively simple boat. I live in a town where the climate will make mold grow on the north side of anything you set down for 5 minutes. I'd rather have no insulation at all than a biohazard in a box.

[–] LarmyOfLone@lemm.ee 2 points 9 months ago (2 children)

Hmm good point about encapsulation. But how is a house harder to encapsulate than a boat? I mean assuming the roof properly protects against rain, you have much less splash, the air humidity is generally lower and it's not corrosive saltwater.

[–] fetter@lemm.ee 6 points 9 months ago (1 children)

A boat you can take out of water and dry dock, seeing, analyzing, and fixing every interior and exterior surface. A house you cannot dry dock and check the exterior of the foundation under the soil.

[–] Peppycito@sh.itjust.works 5 points 9 months ago

Also, boats are made in a mould in a factory. Much smaller, many less nooks and crannies.

load more comments (3 replies)