this post was submitted on 22 Oct 2023
37 points (83.6% liked)

homeassistant

12055 readers
46 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago
MODERATORS
GreatAlbatross@feddit.uk
37
Home Assistant Yellow unboxed to bricked in 10 minutes (lemmy.world)
submitted 1 year ago by johnnixon@lemmy.world to c/homeassistant@lemmy.world
6 comments fedilink hide all child comments
 

I bought a Home Assistant Yellow from the Home Assistant people so it would just work. It came with an old software version and demanded an update. 9.x to 10.x went fine. It demanded another update. 10.x to 11.0 and it's bricked. No HTTP. No SSH. No factory reset.

This is disappointing. At least I didn't even have a chance to set anything up, so things work just as well with it dead.

you are viewing a single comment's thread
view the rest of the comments
[–] aodhsishaj@lemmy.world 28 points 1 year ago (1 children)

You might still have console... Which if you get a readout over console you might be able to reflash to eeprom.

https://yellow.home-assistant.io/guides/use-serial-console-linux-macos/

https://yellow.home-assistant.io/guides/flash-cm4-firmware/

Good luck.

[–] johnnixon@lemmy.world 16 points 1 year ago (1 children)

I had to reimage through serial/USB then the Raspi OS properly downloaded the current image. Thanks for the links getting me in the right neighborhood.

[–] aodhsishaj@lemmy.world 3 points 1 year ago

Anytime! Hopefully this is a resource for future users.