Your best bet would be to look at the datasheets for the OLED or RBGs you want to use. I think most RGBs that are addressable that are commonly used are 5v
this post was submitted on 28 Jun 2023
1 points (100.0% liked)
ErgoMechKeyboards
5849 readers
61 users here now
Ergonomic, split and other weird keyboards
Rules
Keep it ergo
Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)
i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²
¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid
No Spam
No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.
No Buy/Sell/Trade
This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.
Some useful links
- EMK wiki
- Split keyboard compare tool
- Compare keycap profiles Looking for another set of keycaps - check this site to compare the different keycap profiles https://www.keycaps.info/
- Keymap database A database with all kinds of keymap layouts - some of them fits ergo keyboards - get inspired https://keymapdb.com/
founded 1 year ago
MODERATORS
Found it, thank you!
RGB=5v OLED=3v
Before you go charging full speed ahead, you need to look up what the logic voltage on the blackpill is. I've never used one, so you'll have to check that for yourself.
If the blackpill's high voltage is 3.3v, then an RGB running at 5v will likely not recognize 3.3v as high (or as a binary 1 if that's easier to think about).
There are two ways to get around this, either power the RGBs from 3v which is out of spec but will work, or shift the blackpill's logic level to a higher voltage. You can use a diode to accomplish this, with this fiendishly clever hack.
Ordered before I saw this :-/ Bet that’s ok. I can do a bit of a hark if needed. The 3 & 5 volt pins are right next to each other.