this post was submitted on 03 Nov 2023
29 points (91.4% liked)
PC Master Race
14975 readers
227 users here now
A community for PC Master Race.
Rules:
- No bigotry: Including racism, sexism, homophobia, transphobia, or xenophobia. Code of Conduct.
- Be respectful. Everyone should feel welcome here.
- No NSFW content.
- No Ads / Spamming.
- Be thoughtful and helpful: even with ‘stupid’ questions. The world won’t be made better or worse by snarky comments schooling naive newcomers on Lemmy.
Notes:
- PCMR Community Name - Our Response and the Survey
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Ok...So I think I'm mostly thinking of an AM5 board with an 7600 CPU and possibly a 7800XT GPU, 2x16GB DDR5...What should I look for on an AM5 board if it was to last? I mean, I've been using a Gigabyte Z170K3 for nearly 7 years, and so far I never had an issue with it. Then again I never had to mess with it either, other than swapping SSDs and HDDs. Also, what kinda power will I need to hold all this together? Up until now a 750W PSU did the job just fine, but not sure with this config what would be advisable. I'm also concerned as due to the home crappy layout, a lot of stuff goes to the same damn fuse (a NAS, a microPC that acts as self-hosted server stack, a TV and a PS4), so sometimes the fuse gets triggered and shuts everything down. Not great for the PC, but definitely not good for the NAS. This is not all that frequent, maybe once every 6 months...but I don't want to increase it if possible.
The power requirements of AM5 are a lot higher than AM4 but thats usually just a problem on the higher end chips. And compared to Intel's high end they look downright eco-friendly. 5800xt is a beast but looking down the road AM5 is the way to go. The 7600x is a solid CPU and if you get a decent motherboard then you will at the very least get the next generation AMD CPU upgrade path and hopefully the one after that too.
Main thing to look for in a motherboard I think is features, pcie layout, and then vrm quality.
On my current motherboard I was having issues with sata drives not being detected and thought I may have fried something but it turned out that some of the SATA ports were disabled if you used both M.2 slots. I also have to fiddle with the bios to get Linux to boot rather than Windows (I dual boot on separate drives). By default it always boots to Windows after a hard reset.