dingdongitsabear

I guess this should be an appropriate community, participants possibly on the older side... so, I only recently got my first gamepad. played with keyboard and mouse up until then.

so, with a couple of games I tried (tomb raiders, uncharted, NFS, etc) it's kinda going but I suck at anything that needs fast responses, like aiming and hitting moving enemies; don't think I'd have any trouble with a mouse.

so I guess my question is - any old timers around that got good at this late in their gaming career?

I know some wobble is OK, but is this too much wobble on the rear axle? replaced the axle and the bearings, greased them up, screwed all into place. can't remember what it was before I replaced it, am I good here?

found a Playstation 3 (model CECHH04) by the dumpster. cleaned it up and inspected - it's missing the BD and the HD and its cage; I jammed a normal 2.5" HDD in there and stuck some cardboard around. the light turned green, the HD spins up, the fans are spinning and the TV shows it's alive - no OS though.

I've downloaded Sony's official firmware and also some evilnat CFW jailbreak; tried both but the prompt on the TV is to attach a controller to the USB and press the PS button, which I haven't got. can I do something without it? tried a noname PC gamepad and keyboard but no go...

anyone got Chromecast with Google TV 4K working with Jellyfin? it runs Android TV, gets the Jellyfin app and then stuff starts breaking.

It can't connect to the server intermittently, playback stutters, stops, breaks... the server reports the file is direct play and no issues.

Five other devices have no problems of any kind, only this fucker has spells constantly.

anyone managed to attach a monitor to a Poco F1 or Oneplus 6/6T?

can someone explain leverage to me as practised by those RE ~~bullshitters~~ finfluencers. I feel their whole spiel is just bullshit but I don't know enough to be sure about it.

according to them, you "buy" a home - you put X% down and pay your first monthly (and then post on r/firsttimehomebuyer). then you go to (another?) bank and say "look I got this house I wanna use as collateral" and they go "wow you own a house! sure, have this bag of money"... repeat until you "own" like a city block.

like, how does that not crash and burn at the first step, just a cursory glance at the asset's status? how are they not "lol you ain't got no house dumbass come back in 20 years when you actually own it"?

I want to create a minimal install for mpv playback through jellyfin-mpv-shim and macast. this is going to be a base for a FOSS media sink akin to a Chromecast. you attach it to your TV and it plays whatever you send it, like movies from your jellyfin server and youtube/vimeo/piped/etc videos. otherwise, there's no interaction with it, it doesn't handle input (remotes, mice, keyboards, etc.), it's controlled via apps (jellyfin android and allcast).

I've already made a proof-of-concept device running debian 12 with Plasma and it (mostly) works. now I'd like to trim the fat and install only what's absolutely necessary as I currently only have a 2006 macbook with busted screen and GMA950 with a mechanical HD. I'm gonna go with LAN only so I don't have to dick around with broadcom WLAN.

what do I need in terms of DEs and/OR WMs? do I need those at all? I seem to remember that I could run firefox in kiosk mode without anything else but X11, could I run mpv like that? or possibly wayland? what would be the absolute minimum package-wise to achieve this?

to reiterate, it's only going to display full-screen mpv when there's video to play, no menus, navigation, nada. possibly some slideshow-while-idle thingy in the future if it doesn't add too much in terms of software needed, but not right now.

I hate spending money on hardware when there's a software solution. like, I've got a subwoofer from a 2.1 system (without satellites) for free. instead of sourcing speakers for it, however cheap they might be, I'll just utilize the speakers from my monitor. pipewire to the rescue, it creates a combined sink that outputs sound to both DP and analog audio, et voila - a 2.1 sound system. people are like "your monitor sounds like that!?" and usually I play dumb: "yeah, yours doesn't? well that's linux for ya".

so, I have a desktop and a laptop and I'd like to share the same monitor, keyboard, and mouse. modern monitors have a KVM switch integrated, you connect your keyboard/mouse/etc. to it, one USB Type-C cable to the laptop, a couple to the desktop and you have a seamless switch; it even charges the laptop, how cool is that!

however, my monitor works just fine and I don't replace my hardware unless I really have to. USB KVMs with similar functions aren't cheap. also, the monitor already has multiple display inputs so I got to thinking, how do I re-create this with no money, or as little as possible, with DIY tech?

first, switching the display; this one took me no time at all. I have a USB Type-C to DP cable (with DP-Alt) and with the power of udev (detect a connection then trigger stuff) and ddcutil (sends commands to the monitor) I got it working as seamless as possible - I connect the laptop and it automagically switches the monitor over. when I disconnect it, the monitor falls back to an active connection, which is the desktop. awesome!

now how about switching the keyboard and mouse over? I'd like to do it in software, like barrier/inputleap does it but without having to move the cursor to the adjacent monitor. also, both machines are on wayland which isn't supported. eventual input lag to the laptop is unimportant, I game on the desktop. no idea if that can be accomplished or if that's even a thing...

that is a thing - it's called USB/IP, i.e. sharing your USB device over TCP/IP; it's a kernel module included by default for a long time now and that thing rocks! not only does the USB keyboard work without any perceivable lag on the laptop, it get's "disconnected" from the host, so your keypresses aren't disturbing the host. since it's a kernel module, no need to convince wayland to play ball! this also works for webcams, scanners, readers, etc., the client system thinks this is a local device and it just works.

so all we have to do is expand the shell script to bring over the keyboard and mouse along with switching over the monitor once the USB-C connection is detected annnd... success!

well, sorta. my wireless mouse is second-hand and I haven't got the USB receiver for it, so it connects over bluetooth. tried sharing with usbip and it works, but the radio connection gets interrupted or something and the mouse doesn't work there. maybe there's a workaround but I don't want to dig further.

also, how do I switch back to the desktop to shoot some peggies? I don't want to disconnect the laptop manually so I could come up with a slew of shell scripts and udev triggers and I'd also need a ssh tunnel, I don't want my keyboard input to travel over the LAN in cleartext, etc... kinda cumbersome. also, once the novelty wears off, the automagicallity gets tired, I'd prefer manually switching between devices with a keyboard combo.

enter rkvm. it's written in rust and as everybody knows that's super awesome. unlike usbip, comms are encrypted, so no sniffing possible, and hotkey switching is a default function, and it also handles the mouse!

now, rkvm currently doesn't support triggers, like "do X when hotkey combo pressed", but Plasma can handle running the monitor switch script on each device separately by listening to the same hotkey combo.

both solutions have their advantages and disadvantages, usbip requires more legwork but is more powerful whereas rkvm is simpler and easier to set up.

the final step, powering the laptop over the same cable. sadly, can't handle that in software, but there are power delivery injectors out there, some as cheap as $7. also, there's this cool project, looks easy enough to source and implement. not sure if I'm going that way or just go with a used dock station, as those can be had for a song for popular business ex-flagships, like the Thinkpad T-series, HP Elitebooks, Dell Latitudes, etc..

are there downsides? sure there are. numero uno, the host (desktop, in my case) has to be on all the time. not a big deal for me, it gets woken in the morning and suspended late at night. there are edge cases when rkvm geeks out, but for a thing that's in its 0.x version, this is more than usable.

so, I've been using this setup for the past week or so and haven't yet found it to break or have any negative side-effects. gaming on the desktop is as snappy (or shitty) as ever and using my mech keyboard and giant screen on the laptop allows me to easily compartmentalize my business and private stuff.

thanks for reading!

edit: edited title to clarify I'm talking about a Keyboard-Video-Mouse switch, not a Kernel-Virtual-Machine.

I'm considering upgrading to a Ryzen 5 5600, they've finally come down to $100 locally (tray version sans cooler).

currently, I have a 1600AF (lower binned 2600, so Zen+) on a B450 board. the upgrade should be straightforward, my board supports it (latest BIOS) and it has the same power rating, so my cheap-ass PSU and stock cooler don't need upgrading.

reason I want to upgrade is I have a number of issues with it under linux so I'd like to check if someone runs a similar setup.

first, I have Cool & Quiet and C-states disabled and Power Idle Control to "Typical Current Idle"; otherwise the machine freezes when waking from suspend after a short while. the second issue is, I have 3600 MT/s Kingston Hyper-X modules that I have to run at 2400 because both XMP profiles (XMP1-3000 and XMP2-3600) are unstable and cause apps to crash (the latter sometimes won't boot at all, can't unlock LUKS).

supposedly, both those issues are fixed in newer gens; old Zen/Zen+ had issues with faster RAM, and the C-state handling is also better in Zen3. also, I can use the new amd-pstate driver.

my PC is plenty fast as is, I'm only considering upgrading to fix them two issues. if it's the same on the other side of the fence, I'd rather skip it.

anyone had first-hand experiences with this?

edit: thanks everyone who took the time to share their setup, I'm way more optimistic about making the jump!

cross-posted from: https://lemmy.ml/post/11999240

anyone know what the last option does? I want to remove movies that were added by the list but were then taken off it. but the way it's written, it sorta implies that all movies that aren't on a list will be removed, which is what I very much don't want.

anyone know what the last option does? I want to remove movies that were added by the list but were then taken off it. but the way it's written, it sorta implies that all movies that aren't on a list will be removed, which is what I very much don't want.