An AI-powered Clippy… have we learned nothing from Star Trek Lower Decks about what can go wrong with this??

Arthur Grand Wizard Technologies

I went looking for the webpage that followed to resolve my problem but couldn’t find it.

This page has some tips.

But I think you got some good advice in the other replies. I hope something helps to fix the issue.

I too had this problem recently during my first Linux test drive.

The network set up you’re describing is actually the process for setting up your device as a hotspot, not to connect to the Internet.

As mentioned here elsewhere, it’s a driver issue. You have two choices:

  1. Download drivers to the USB drive and update the WiFi chip.
  2. Easier: connect your phone’s hotspot by Bluetooth connection from the device instead. Then run the update manager to bring in everything that’s missing.

After this you should be able to click the system tray network icon and just pick your WiFi connection/router of choice like you’d normally expect to be there.

[-] ToffeeIsForClosers@lemmy.world 7 points 2 weeks ago

This isn’t the first time he’s been attacked.

[-] ToffeeIsForClosers@lemmy.world 2 points 3 weeks ago

This is great! Thank you so much for giving me some direction here.

I’m going to give this a whirl on one of the units and see how it goes.

[-] ToffeeIsForClosers@lemmy.world 2 points 3 weeks ago

Thanks, that’s very kind of you to offer.

I’ve got quite a few older machines. I’m pretty keen to figure out the top four, at least.

Any advice on the following and/or on the method of identifying viable distros and versions in general is very appreciated.

  • MacBook Pro (15-inch, 2.53 GHz, Mid 2009)
  • iMac (21.5-inch, Late 2009)
  • Mac mini Server (Mid 2010)
  • MacBook Air (11-inch, Mid 2013)
  • MacBook Pro (15-inch, Late 2008)
  • iMac (Retina 5K, 27-inch, Late 2014)
  • Mac mini 2018
[-] ToffeeIsForClosers@lemmy.world 1 points 3 weeks ago

Question for you guys.

How do you know which version to install relative to the hardware? Is it just trial and error?

I have some 13 year old Macs but I’m not sure which distro and version to go with and I’m not keen on spending days figuring it out.

I recall reading another post from some guy who went through like six installs with various problems. Didn’t seem encouraging.

[-] ToffeeIsForClosers@lemmy.world 1 points 3 weeks ago

Sounds like asthma or walking pneumonia even, but I’m no doctor. I recommend getting checked out.

[-] ToffeeIsForClosers@lemmy.world 9 points 3 weeks ago

Hunh, I thought I was hearing “The Oral Germ Whore”.

[-] ToffeeIsForClosers@lemmy.world 1 points 3 weeks ago

You can self-host Feedbin or you can get a paid account for $30 USD.

Lots of great functionality built-in. I use Unread app for iOS as the front-end instead of Feedbin’s web app. A paid Unread account would also give you RSS feed hosting, but less feature rich.

[-] ToffeeIsForClosers@lemmy.world 6 points 4 weeks ago* (last edited 3 weeks ago)

Yes exactly, a game changer for me as well.

I used to use tap water too. I have to highlight why distilled or boiled water is important though. Tap water isn’t sterile and there have been cases of microbes creating infections when used with Neti pots.

Naegleria fowleri is a brain-eating amoeba that has been linked to tap water usage in Neti pots, among other scenarios.

These cases are rare, to be fair, but still worth avoiding with distilled or boiled water. There could be other less fatal microbes junking things up, after all.

I gotta clarify, boiled but then cooled water for use in your Neti pots!

4

Is there a way to know which app triggered the shortcut call?

For instance, if I share files from the Files app, I could reference something to see “Files” or “iCloud Drive”. When it’s Mail, I’d see “Mail”. Etc.

I am trying to have one universal shortcut for file input but I need to specialize some actions depending on the app that provided the files.

I checked “Shortcut Input” but there aren’t a lot of choices to evaluate. “File Path” is inconsistent in what it will show: executing from the Shortcuts app and picking a file will shows “iCloudDrive/FolderName/Filename.ext” but sharing from the Files app will just show the filename.ext. Sharing from Mail shows the file content.

3
Backup All Shortcuts (routinehub.co)

I found this nifty shortcut to backup all shortcuts. You can set it to an automation and do a rolling limited number of backups on a set schedule, like 10 zip files max, backed up weekly.

There’s a problem though. There’s an error on the Make Archive step.

I stripped the shortcut down to Get All Shortcuts, Make .zip of My Shortcuts. The error persists.

I’m not sure why it’s not working unless this is an existing Shortcuts bug at the moment.

Anyone know?

7

Anyone know how to tag an Apple Note with multiple tags?

I can create the note, append to it, and tag it with a variable or straight text but I cannot figure how to add multiple tags.

I tried a list, dictionary values, comma separated, new lines. I even tried looping over Add Tag action with a single tag but everything results in an error on trying to tag multiple times to the note.

Let me know if you’ve figured it out!

5

I have an X-Arcade dual joystick that I’m trying to use with Arcade games via EmulationStation on the Steam Deck.

The joysticks work but I’m having two problems that I’m looking to solve. They should be universal problems, not just about this joystick unit, so I’m hoping someone here can guide me.

  1. How to set controller order within EmulationStation? I use a Steam Controller to navigate the Deck otherwise but have to turn it off when I start an arcade game or the X-Arcade won’t work. I think it’s the controller order I’ve read about but can’t see where to set this.

  2. How to set controller inputs for a specific game in EmulationStation? I see the input settings menu but I believe this overrides all games. I don’t see how I can bring up the old MAME menu for game specific inputs. Do I have to do this via config file in desktop mode instead?

The joystick unit has the PCB upgrade that allows X-input. I can see both joysticks as XBox 360. The deck is updated as of August 1st stable release. EmulationStation with 2.1.1 and all other desktop application updates applied including EmuDeck emulators and flatpaks. Based on some other issue and advice, I have previously pointed EmulationStation to a different and newer MAME emulator vs the one that came with the EmuDeck install.

view more: next ›

ToffeeIsForClosers

joined 11 months ago