23

I am at my wits end with this and kindly ask for assistance.

I cannot for the life of me decide on how to set up my music library for the foreseeable future:

  • I started out having my library on my local pc, managed by MediaMonkey
  • As I bought a NAS, I moved my library to it and used Navidrome to stream it to an android app (Synfonium)
  • This meant that I'd lose the MediaMonkey management, but I thought for now I'd just manually transfer new songs/playlists over to the NAS when needed
  • As I started streaming with Navidrome, I noticed that the speeds were really bad and music often buffered (no idea why, Jellyfin works fine), so I cached all the songs offline
  • This made me think that I don't even need Navidrome since at that point I could just copy the music files to my phone if they're gonna be offline anyway, but then I don't have a backup on the NAS

And now I'm kinda lost, unsure what the best way to handle this is. I'd like to keep MediaMonkey in the flow for library and playlist management, and streaming is pretty cool for those times where I'm listening on other devices. However, having the music on my NAS just seems to create an extra middleman. What's most important to me is a smooth mobile experience, with a good UI and no interruptions, as that is where I listen to music 95% of the time.

How do you do it ? Any suggestions for how to future proof my setup without too much of a hassle (still kinda new to all this stuff)? For reference I don't have a huge music library, maybe a few dozen GB, so it still fits easily on my phone.

Sorry if this was too long or doesn't fit the subreddit, but I hope someone can enlighten me.

top 26 comments
sorted by: hot top controversial new old
[-] mihnt@lemmy.ca 11 points 1 month ago

Why not just use Jellyfin if you said it works fine?

[-] StitchIsABitch@lemmy.world 4 points 1 month ago

I meant streaming shows with Jellyfin works fine, so I don't see why streaming music shouldn't work at least as well. I don't like using streaming clients such as Plex or Jellyfin for music, they just feel quite unpolished.

[-] MaggiWuerze@feddit.de 5 points 1 month ago

Plex has the PlexAmp

[-] mihnt@lemmy.ca 4 points 1 month ago

Symfonium works with Jellyfin. ;)

[-] rambos@lemm.ee 4 points 1 month ago

I thought its Finamp that works with Jellyfin. Is that just alternative of Symfonium?

I don't stream music often, but never had issues with Finamp

[-] mihnt@lemmy.ca 4 points 1 month ago

Symfonium works with most everything. It's the most full featured by far too.

[-] invisiblegorilla@sh.itjust.works 3 points 1 month ago

Its proprietary though, right?

[-] mihnt@lemmy.ca 3 points 1 month ago

I haven't seen what license it's under, but it's not free though so I assume it's closed source as well.

[-] dezvous@lemmy.world 5 points 1 month ago

If your music fits on your phone, you could just use Syncthing on your NAS and phone to simplify the process of adding new music to your phone.

[-] zingo@lemmy.ca 1 points 1 month ago

Ah come on - they haven't released a phone with 2TB of space yet. /s

[-] t0fr@lemmy.ca 1 points 1 month ago

I see the /s but you can always only sync a subset of your music.

[-] zingo@lemmy.ca 2 points 1 month ago

It's all or nothing bro! ;)

[-] atzanteol@sh.itjust.works 4 points 1 month ago* (last edited 1 month ago)

I'm not familiar with MediaMonkey so this may not be an option but...

I've used Subsonic for a number of years as my streaming server. I don't use tools to manage my files but one of the things I really like about Subsonic is that it will present the local file system structure to the clients (rather than only relying on ID3 tags). So if I create a directory called "1990s" it will show up in the Subsonic hierarchy (eventually - it scans periodically for new files).

I'm assuming you could use MediaMonkey to manage the files on your NAS over CIFS? Then Subsonic could just read the filesystem over NFS as well and serve what you have setup.

Subsonic clients offer the option to cache files or stream as well which is great for traveling.

[-] avidamoeba@lemmy.ca 3 points 1 month ago

Plex or Jellyfin. I'm currently using Plex but will likely be migrating to Jellyfin at some point.

[-] MalReynolds 2 points 1 month ago

Look at syncthing, set a directory with your music on your desktop/laptop , sync to phone, profit....

[-] t0fr@lemmy.ca 1 points 1 month ago

This is what I do. I manage my music with MusicBee and sync a subset of the library to a folsee which is then synced with my phone.

[-] Decronym@lemmy.decronym.xyz 2 points 1 month ago* (last edited 1 month ago)

Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:

Fewer Letters More Letters
HTTP Hypertext Transfer Protocol, the Web
IP Internet Protocol
NAS Network-Attached Storage
NFS Network File System, a Unix-based file-sharing protocol known for performance and efficiency
Plex Brand of media server package
nginx Popular HTTP server

6 acronyms in this thread; the most compressed thread commented on today has 12 acronyms.

[Thread #688 for this sub, first seen 18th Apr 2024, 14:55] [FAQ] [Full list] [Contact] [Source code]

[-] sabreW4K3@lazysoci.al 2 points 1 month ago

Personally, I would go the Navidrome route. Figure out what the issue is, it's likely that your router is fucking shit up.

[-] Lifebandit666@feddit.uk 1 points 1 month ago

I feel this post a bit.

I'm halfway through getting the id3 tags right on 40gb of music I pulled from an old iPod I have in the car.

I'm using music brainz I think it's called, which uses media monkey as a backend. I'm scanning my library into this app and it's putting the tracks into album files (they're just chucked in artists folders at the mo, the iPod fucked the naming) and getting all the tags right.

Now I have this library on a NAS which I've pointed Squeezebox at in the house, and outside I use Plex Amp.

While I'm running the files through the music Brainz app thing, I'm seeing all the albums appearing in there instead of 1 album with 300 tracks.

Anyway long answer short, I'm having no issues with Plex Amp, just point Plex at your music and download the Plex Amp app

[-] t0fr@lemmy.ca 1 points 1 month ago

I have not been quite satisfied with any of the self hosted streaming solutions or apps. There's always an annoyance I have with all of them.

Just using MusicBee and syncing a subset of my library to my phone has worked the best. Syncing it using SyncThing.

[-] Ginger666@lemmy.world 1 points 1 month ago

How much music do you have that you actually listen to a lot on your phone?

Most phones are over 200 gigs now so you should have plenty of room to just store it on your phone.

Also, when the bombs go off, wouldn't it be nice to have your favorite song on your phone so you can listen to it one last time before the darkness creeps in?

[-] CaptainHowdy@lemm.ee 1 points 1 month ago

Airsonic Advanced and DSUB on Android are pretty good options since DSUB has advanced local caching options.

I aquire my music then run it through Picard for tagging which places it into my NAS where it is mounted to airsonic and jellyfin containers for consumption.

The jellyfin apps have gotten a lot better and I find myself using feishin and finamp more often lately.

[-] zingo@lemmy.ca 1 points 1 month ago

Ultrasonic works in the same way as DSub.

[-] gccalvin@lemmy.world 1 points 1 month ago

I have no issues with Jellyfin + Symfonium, but I also cache my songs offline. I almost never play a track that hasn't been downloaded.

[-] lyoko@lemm.ee 1 points 1 month ago

If you have some times, you could try my new Opensubsonic server, which is written with performance in mind (I've tried to do a lot of things in compile-time) especially if you are transcoding the song a lot.

[-] tagginator@utter.online 0 points 1 month ago

New Lemmy Post: Help with music library setup (https://lemmyverse.link/lemmy.world/post/14428029)
Tagging: #SelfHosted

(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)

I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md

this post was submitted on 18 Apr 2024
23 points (89.7% liked)

Selfhosted

37181 readers
149 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS